OpenSUSE Install :: Boot 3 Terminal's Without OS From A Linkat?
Apr 6, 2011
I was trying to boot 3 silly Terminal's without OS From a Linkat (OpenSUSE) server, and it works, the problem comes when i log in, at two of them, with the same account, and i open the same progress (like firefox) at the same time in the 2 computers. It give's me an error that say's that the process it's being used and i only can open 1 instance of it.Did you know how can i solve it, without creating another accounts?
I was working on something important in 11.2 and did a "zypper up" in the terminal in the background. I wasn't paying that much attention to it, I believe it was an update to 11.3. After returning to the computer after about one hour the windows were behaving strangely and the machine wasn't very responsive. I decided to reboot. Now at login I have neither mouse nor keyboard. I have switched the keyboard to PS2 model, no difference. If someone could help me with booting to run level 3 from the grub menu perhaps I could change some settings there to make everything work. I really regret doing the update. It would be very important for me to be able to get back in to machine with spending as little time as possible on this. Could I reverse the update? This machine is very important for me and my family for their daily communication, but currently I have very little time to fix this. My quick fix was to install Kubuntu 10.10 so I could resume working, but I would really need to get back in to 11.2.
I'm running openSUSE 11.3 and screwed some things up so that I can't install anything, including UNetbootin. So I decided to completely reinstall. I'm limited to using my hard drive as there's no CD/DVD or floppy drives installed on the machine and BIOS does not support booting from USB.
I found these instructions - Install any Linux distro directly from hard disk without burning any DVD - Just Another Linux Lover Blog
From the terminal enter these commands
sudo mkdir /distro sudo chmod `whoami`:`whoami` cp MYLINUX.iso /distro/distro.iso Now extract Linux_kernel & Ram_disk to /distro# Open /boot/grub/menu.lst #ADD NEW ENTRY# title Install Linux root (hdX,X) kernel /distro/Linux_kernel initrd /distro/Ram_disk
Reboot and select "Install Linux" from grub. Blog Widget by LinkWithin
Creating the folder "distro" on root was easy and went smoothly. I can't seem to make the second 'whoami' command work, though. I copied-and-pasted "sudo chmod `whoami`:`whoami`" into the terminal. It asks me for the root password, I enter that and then get
chmod: missing operand after `holly:holly' Try `chmod --help' for more information.
I didn't see anyone reply in the comments of that page saying they had trouble with it, so I think I'm just being an idiot. One person did suggest adding distro at the end on another page and it gets me
chmod: invalid mode: `holly:holly' Try `chmod --help' for more information.
I eventually got round to moving my AMDX4 machien from 11.1 to 11.2. I have done this to a coupl eof other similar machines so was not expecting any problems.
However I now have a problem. In runlevel 5 I have an xdm logon screen, but neither the keyboard or mouse work. I can ssh in from another machine and changing to runlevel 3 i have a keybopard and can log in. But sax2 does not respond to keyboard or mouse, so the machine is not really usable.
What package should I reinstall? Or what else can I do?
PS Not attempting to run gnome, kde or dfce; plain fvwm and X
I recently installed Fedora - it seems like a nice interface and I want to experience the system before deciding whether I want to keep using it over my ever reliable Crunchbang, which gives me absolutely no grief whatsoever. However, it is nice to use an attractive interface now and again.So, here's my problem - I opted to install the ATI drivers when alerted to the restricted ones by the pop-up. I took note of how to disable them again if there were problems with the display after reboot. There was a problem with the display (black screen) and I can't get the command entered at boot time because the only command line environment I have an option for is GRUB. Grib does not recognize any of the 'aticonfig --initial -f' command that ATI instructed me to use to get things back to normal. How do I do this? I prsume others have been there and will know how to guide me. - getting the graphical interface to display better graphics. I want the eye candy that desktop effects give. I am hoping Fedora won't let me down here because I could simply continue to use Ubuntu which only gives one problem with the window resize delay.
openSUSE 11.2, just installed. When I start the "Root Terminal", I get this error message: Could not launch 'Root Terminal' Failed to execute child process "gksu" (No such file or directory) This error message doesn't mean enough to me to know what I need to do.
I am coming from Kubuntu 10.10, which is a Debian based OS. I am used to going into the terminal and typing sudo apt-get install or sudo apt-get remove to install and remove programs. I know it is the hard way to do it, but I find it gave me more flexibility. So how do I do this in openSUSE 11.3? Or can I even install things through terminal? What is the command? I know there is YaST but I also want to learn how to use the terminal
So when I write my password in a terminal the letters occur in clear not ***(star). what shall I do that enetering the password to work right.I want to say if I push key f for example the system to show me one *.I know it's easy but really I forgot .
linux-rle9:~ # xvidtuneUnable to query monitor infowhy??? :S:Si got opensuse 11.3 installed and when i reboot,.i got a black screen saying ' Out Of Range'at the boot menu of Opensuse i have modify the resolution and it worked but when i restart its as if the configuration was not save and each time i start my computer i have to re configure the resolution
I have downloaded the hplip command on the desktop, attempted to cd desktop, and it shows "no such directory". running this command so I can set up my printer? And I can't seem to put the screenshot here..
I've noticed on other Linux distributions that after boot up and logging off the console screen clears and provides basic information like the Linux distribution and then under it the login prompt. How can I do this for openSUSE 11.3?After I install or reboot I still have all the boot up stuff shown and when I logout after performing some work my commands are still shown. I boot the system to runlevel 3 and barely use the GUI but would like the screen to clear everything after boot up and logging out.
SuSE 11.4 is a wonderful release, but two chronic problems remain. The most serious is the inability to get Gnome to recognize an intel driver parameter specification in xorg.conf or 50-screen.conf with a predetermined, working screen specification. With the latest update that includes: [url]
Gnome will boot up in a strange resolution with a display of a pink screen and fragments of icons split and duplicated over the display. Teasing open the terminal parameter screen, terminal parameters (resolution, horizontal rate) appear to be correct. The terminal type is 'undefined', whether the screen is operating correctly or not, and any attempt to set defaults are refused. Perhaps the intel driver has not been selected by the operating system. Is there a way to specify a default screen driver?
This has been a chronic problem, now aggravated with the latest update to the point where the computer is now rendered inoperative.
Ironically, the other problem, that of the difficulty in downloading certain update files also remains. Had an elaborate update workaround procedure not been followed, the system would still be usable.
when one downloads non-rpm packages they are placed in a download window(by file roller).Could someone explain where exactly this download window is located in the directory tree? or is it? how does one install these packages from the terminal as root without knowing where their located?
I added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday
I have one problem with taking screenshots during SUSE installation. I am using 10.2 version. Button PrtSc does not work and Terminal is not available during installation (at least I think it isnt)Do you have any idea how to do it?
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows... sda1 = Win7 system (default install) sda2 = Win7 Main (default install) sda3 = swap sda4 = Extension (I think thats what its called) sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
so the safest way to go about this is to assume I know nothing. I mean, I have a rough Idea of what a kernel is, no idea what a shell is, etc. I do consider myself computer savvy, but know NOTHING about linux and thats why I'm Diving in, hopefully not too much, this is just to give you an idea of what we're working with here.
After several install attempts I kept getting a blank screen. Whether it be black,white, or the default gnome desktop (without any icons, and simple things like ctrl+alt+backspace just doesn't work, or anything else for that matter) I was ending up with a blank screen. Driver for moniter....maybe....but I did succesfully install it once, and it worked like a charm...shutdown properly, and the next day after work...Boom, same thing after startup.today I started from scratch and re-installed....samething, until I hit the power button, went from the dvd(iso) and did a fail safe, now my resolution is much better than it was the first time..Actual questions.....what did I do to fix it when failsafe never worked before?
Is there a way to save these settings, so I don't run into the problem again, because I don't even want to turn of my computer at this point?If i'm trying to dive in and learn the command line actions, is there any substancial difference between gnome terminal or hitting "c" to bring up the command line?
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
