OpenSUSE Install :: Xen-kernel Gives A Black Screen Just After Grub Menu?
Jul 17, 2010
After a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
View 8 Replies
ADVERTISEMENT
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 2, 2010
i've just tried to install openSUSE on to a spare hdd, i've also got windows 7 on another. After installing everything and the computer went to reboot the screen just went black and didn't restart. After restarting it myself, i turned the computer on and got to a menu that says:
openSUSE
failsafe
windows
When i tried to go to openSUSE it seemed to work and a long list of text came up but after a few seconds it went to a blank screen. The same thing happens when i go to failsafe. so i'm not really sure what to do, i would have tried a few things i've found from searching but can't get to the command prompt on failesafe.
I've got an ati readon hd 4750 video card.
View 9 Replies
View Related
Mar 9, 2011
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
View 8 Replies
View Related
Aug 23, 2010
today I have updated OpenSuse 11.2 to 11.3. When the system boots I can see BIOS output and selftest. After GRUB is passed the screen goes black, but boot process is continued to "init 3". SSH and all daemons work fine. I get a screen on the remote inside board, but no output on the attached LCD (Graphic: ATI ES1000 on board). I seams that output is redirected to "Remote Inside Board" only. how to switch output back to screen?
View 9 Replies
View Related
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
May 14, 2011
Here's the problem: My ubuntu goes into a black screen with "_" flashing after selecting the kernel in grub menu. Everything has been working just fine since I installed it (about a month ago, when 11.04 came out). The problem must have something to do with grub not finding the correct partition or something like that. I was messing around with pysdm, trying to make it auto-mount one of my partitions, so that's the likely cause of my problem. However, I did not edit anything on the ubuntu partition, only the partition where my files are located. Is there any way to tell grub which partition to load upon booting up?
View 9 Replies
View Related
Jan 3, 2011
Installed kernel-rt-2.6.31-6.1.i586.rpm for low latency studio recordingreboot then immediately black screen.Ctrl+Alt+F1 not working Ctrl+Backspace not workingcannot get in console modeGraphic adapter : Geforce 6600Opensuse 11.3
View 9 Replies
View Related
Oct 15, 2010
I have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
View 9 Replies
View Related
Jun 28, 2010
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
View 3 Replies
View Related
Jul 30, 2010
I am having trouble with the grub boot menu. I have a dual boot system, Windows XP 32 bit and Ubuntu 10.04 64 bit. Windows was preexisting when I installed Ubuntu. The install went fine but when I restarted, the Grub menu gives the option of the Windows boot loader but when I tab to that and press enter the screen goes black and the curser just blinks in the upper left corner...no XP boot. The XP drive is there as I can mount it from Ubuntu side but when I try to boot into it it does not seem to be there. What have I done and what can be done so that I can boot into the XP side?
View 7 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Feb 27, 2011
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
View 1 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Sep 2, 2010
I've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?
View 3 Replies
View Related
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
View Related
Dec 24, 2009
I'm running openSUSE 11.2 on a Thinkpad T61p with nvidia graphics. I'm running the proprietary nvidia driver.The battery ran very low and the computer suspended itself. After I woke it up, the desktop is completely black.After troubleshooting as much as I could, I did ctrl-alt-backspace, which brought me to a normal (non-black) login screen. However, as soon as I logged in, I was back to a completely black screen. But the system is operating.I rebooted the computer (warm reboot as well as cold restart) and each time the video is normal until I get to the desktop and all I get it black.Everything was normal until the pm suspend.Suspend has never worked exactly right, so I don't normally use it. But in this case, it used itself Next step: I logged in to console mode and looked at the logs. The only messages of interest seem to be in Xorg.0.log I found a couple error messages that might be of interest:
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(II) UnloadModule: "nouveau"
[code]....
View 9 Replies
View Related
Feb 18, 2010
I'm on a JFK assassination binge right now
Every ten minutes or so the screen goes blank and I have to hit the keyboard or wiggle the mouse to bring it back to life
This isn't hibernation...for the audio still works
I've looked around the control center...right clicked the desktop and looked at options there
View 5 Replies
View Related
Mar 2, 2010
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
View 6 Replies
View Related
Apr 7, 2010
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
View 9 Replies
View Related
Oct 5, 2010
I tried both installing 11.3 on top of 11.2 and a new install with the same result on a couple of different mac pros (with 2009 ATI Radeon HD 4870 with 512MB of GDDR5 memory, 2.66 GHz 2x4 core Xeon 3500, 24 GB of memory). The install was done via the downloadable dvd from opensuse.org. The graphics of the install process looked fine as well as the configuration. When it came time to boot, however, the suse splash screen showed up and then the monitor went dark. The graphics seems to be frotzed. Now attempting to boot from the DVD does not cause the display to do anything. Even putting a mac DVD restore disk (and using C during boot) does not result in anything on the display). Any ideas of what the installation could have done -- seems like a no-brainer that something is screwed up with the graphics card, but I have no real proof and even less idea of what to try next.
View 2 Replies
View Related
Jun 2, 2011
I very frustrated at this point. I have tried to boot OpenSUSE 11.4 from the usb flash drive iso and CD iso. After I restart my computer the boot menu comes up and I click the boot option and the screens loads a bit and then goes black. I have also tried the text installer, but that doesn't work either. I know the problem must be my graphics chip. I have a integrated Intel HD Graphics chip. My laptop is a Gateway NV79. How can I get the graphics to work?
I've tried everything I can think off. I'm not the most computer savvy so if someone replies I would appreciate a dumb-down explanation on what to do with clear steps, if possible. Note: I'm dual booting with windows 7. The graphics problem is not just OpenSUSE. I tried Ubuntu 11.04, Kubuntu 11.04, Fedora 15 and they all have the same problems. In Fedora 15, I was able to boot in but I got an error message that said Gnome 3 fallback and I couldn't get the graphics to change to standard mode
View 5 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Apr 2, 2011
I get a black screen when I install the driver, plus:
Code:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
is there a method to install the drivers on openSUSE 11.4?
View 7 Replies
View Related
Dec 9, 2009
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies
View Related
Dec 12, 2009
I recently installed 11.1 via unetbootin from the network onto an old Sony VAIO laptop. After the installation completed, I suppose the OS started to boot, but I was presented with a black screen. I heard "chimes." The black screen does not provide any visible feedback from mouse or keyboard input. I hard rebooted and was presented with an interesting background graphic (grayish, I think) that faded to the same black screen.
View 9 Replies
View Related
