OpenSUSE Install :: No /etc/init.d/boot Script Found In SLES11 Rescue Image
Apr 29, 2010
Currently I run into a rather confusing case. I met bellow mount errors when I was about to enter the rescue mode on SLES11:
Code:
Loading Rescue System (1/2) (19784 kB) - 100%
Loading Rescue System (2/2) (10268 kB) - 100%
Reading Driver Update...
[Code].....
Then I tried to extract the rescue image and to see what's wrong in the scrip, but it turn out that there is no boot script under /etc/init.d directory, either a similar one that may as it.
where is the script or which is the script does the mount things in rescue image?
PLUS, I can see /etc/init.d/boot script in SLES10 rescue image.
View 2 Replies
ADVERTISEMENT
Jan 31, 2011
While I was using my computer a few days ago, the terminal stopped working properly, so I tried to reboot, and when it started up again it wouldn't boot and said "no init found. try passing init=bootarg"
This has happened twice before, so I really need to figure out what keeps happening, otherwise I can't continue to use linux. i reinstalled both times before. i think that this is caused by a process that prevents me from using the hard drive, because when I try to check the disk in the terminal or in gparted, it says Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program?
Also, in the disk utility, in the lower right corner of the filesystem it has a spinning "loading wheel".(i'm not sure if that means anything)
I am using ubuntu 10.10, but am not sure what kernel I am using, but i tried a few different kernel options(there's three of them at start up). safe mode does not work either.
View 3 Replies
View Related
Jun 26, 2010
Before I do a fresh install of opensuse 11.2, I am trying to mount my lvm partitions in rescue mode so I can do a full backup. How do I mount them?
View 3 Replies
View Related
Jan 1, 2011
I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem.
It failed to boot and got this message: no init found. try passing init= bootarg
The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.
View 2 Replies
View Related
Jul 4, 2011
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies
View Related
Jan 20, 2010
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
View 9 Replies
View Related
Aug 23, 2010
Recently I tried installing Ubuntu via CD, I burned the Image like the website said, It booted then it gave a black screen saying init was not found or something in that nature. I tried a few more times with no luck. I am making another CD to see if it works, hopefully it will,. Its a relatively old HDD. It has Win 98 on it. 9.18 GB space.Quantum Fireball lct 10 3.5" series.
View 5 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Jul 27, 2010
I was try to installed ubuntu 10.04 on the Macbook pro .But it was failed .I got following message:
/init: line 1: can't open /dev/sda: No medium found
I have already Bootcamp to create a partition to install Ubuntu . partition file system is FAT32.
View 9 Replies
View Related
Apr 19, 2011
Im am building a Linux distro. It will be very tiny and fast.
I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.
The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.
When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.
The kernel works OK with others initramfs/initrd files. But not with my own.
Quote:
Here is how the end of the kernelcomplie look like.
Quote:
Here is my init file who is the initrd/initramfs source.
Quote:
The initramfs folder contains "bin" (folder) and "init" a file. No more.
The problem is that the kernel cannot find/read init file.
View 4 Replies
View Related
Jan 31, 2011
I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Dec 4, 2010
I have a strange problem with grub. My grub boot image randomly changes sometimes into default opensuse and sometimes into penguin moving around.Is is a funny program?
View 9 Replies
View Related
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
View 29 Replies
View Related
Dec 19, 2010
On starting Ubuntu from the grub, I get the following message,
Code: No init found
Busybox v1.15.3(ubuntu 1.1.15 3-ubuntu5) built in shell (ash) Enter 'help' for a list of commands (initramfs)_ I use a dualboot system, with Ubuntu 10.10, and Windows 7.
View 9 Replies
View Related
Feb 24, 2010
I am running SUSE 10.2 under z/VM 540 and have java working fine. I also have IBM EKM software running fine(if I execuute the script manually).I am trying to start this software automatically following the boot process. I have tried creating a member /etc/init.d/after.local but it does not seem to know where java is./etc/init.d/after.local: line 2: java: command not found"" After I login to any user I can get java -version to work, so my classpath is good.
LINUXEKM:/ # java -version
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pxz64dev-20091106a (SR11 ))
[code]....
View 2 Replies
View Related
Apr 23, 2010
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies
View Related
Jul 23, 2010
I'm trying to set up a PXE Boot Installer for Linux. The problem I'm having right now is that our standard repo that was have set up [URL] doesn't seem to be working as an install point (I keep getting "no repository found"), even though it works great as a means for a software repo (Its used by several hundred other servers). Is there a difference between a software repository and an installation repository?
View 1 Replies
View Related
Aug 9, 2010
I'm using OpenSUSE11.2, and want to upgrade to OpenSUSE11.3 from internet. But there is not F4(Source) in boot menu. In my computer, F4 is keyboard menu. What shall I do?
View 1 Replies
View Related
Sep 18, 2010
I have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies
View Related
Mar 14, 2011
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
View 1 Replies
View Related
Jul 21, 2010
I installed openSUSE 11.3 on my iMac along with "Mac Snow Leopard, Windows 7" to make it a "Triple Boot". But after installing the "GRUB/LILO", it does not chain with the boot loader "REFIT" that I use. Each time I try to boot into "Windows/openSUSE", it shows a message: no boot device found, insert boot disc". So why isn't the "GRUB/LILO" working?
View 4 Replies
View Related
Oct 22, 2010
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
View 9 Replies
View Related
Jan 11, 2010
How do you change the hostname in SLES11? I have normally used the /etc/hostname file and rebooted the server in other distros. I only notice the way to change it is in yast2 -> network devices -> network settings -> Hostnames. I am looking for where it is stored because I want to write a script to update it (apart of a server deployment process).
View 9 Replies
View Related
Dec 22, 2010
How do I run ifplugd on SLES 11 ?
View 1 Replies
View Related
Nov 4, 2010
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
View 3 Replies
View Related
Jul 2, 2010
I have SLES11 installed on server. I have attached 2 SAS cables which are connected to External storage device. I have connected 3 machines to external storage device. It shows total 6 ID�s. I want to know which 2 are from which machine. I would like to find out the WWID number of HBA�s on SLES 11 machine.
View 3 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Sep 3, 2010
i am trying to install openSUSE from a usb pen. i have configured the BIOS to boot from Usb pen. i get "Could not find kernel image gfx boot".
View 5 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
