OpenSUSE Install :: Clean 11.2 Install Afterwards Hang On Load?
Jun 6, 2010
Okay I did a clean network install on 11.2 on my test machine.Old gateway box but it had min requirements. It will load completely into failsafe mode but will not complete a normal boot option.The default Green background images comes up and the cursor comes up, but I let it sit for 30 minutes and nothing. I did a hard reboot, still hung on cursor and green back ground. Booted again but this time choose failsafe, boot up completely. Am I doing something wrong? I have installed many many version of Linux in the past never had a problem like.
View 9 Replies
ADVERTISEMENT
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Apr 8, 2010
So, I currently have Ubuntu on my laptop and would like to install F12 instead.I burned a copy of the F12 .iso and set my BIOS to boot from CDROM drive, but Ubuntu continues to load and I can't seem to get the OS to load for a clean install (from the .iso, even after extraction).Unfortunatly, the BIOS will not let me boot from USB otherwise I would try that.Any ideas on what might get this off the ground?
View 8 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Nov 13, 2009
Did a clean install with 11.2 after being very impressed with the LiveCD. After installation process finished, laptop booted up and I had a green screen, no icons and a mouse cursor. REALLY liked the way the OS performed on the LIVECD and would like to give it a real shot.I can install Fedora 11, Ubuntu, Madriva and Mint Linux with no problem on the same Toshiba laptop.
View 9 Replies
View Related
Oct 24, 2010
There are several posts here about not being able to boot without the install disk, which is also my case. I imagine the solution for me should be easy, because I only have a single installed OS on this machine, which is a MacBook Pro 2.1. Here's the result of fdisk -l:
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[Code]...
Partition table entries are not in disk order sda4 is a partition that did not appear in the partition overview when I installed the operating system. I thought I'd look for help here while I continue to research the problem myself.
View 4 Replies
View Related
May 18, 2011
I just switched back to openSUSE from Fedora linux. I made a clean install of openSUSE 11.4, but had trouble when installing the boot loader. For whatever reason the auto-partition tool hadn't given me a /boot partition even though the GRUB configuration referenced it. So I switched the / partition to /boot and the /home to / and now I don't have a /home partition. Is this why my system won't boot past the splash screen in "normal" mode, but boots fine in "failsafe"?
View 3 Replies
View Related
Jan 21, 2010
I was trying to upgrade to 11.2 from 11.1 by upgrading the OS online. However my internet connection failed and the upgrade has now messed up my system. I have a dual-boot system with Windows XP and I'm wondering if it would be OK in getting the DVD and selecting update? Or do I have to change the boot log etc?
View 6 Replies
View Related
May 13, 2011
I am completely new to OpenSuse and just installed it. However, I wanted things encrypted for work and chose LVM2 with password encryption upon installation.However, I didn't change any of the values.Now I see that my home partition is only about 30 Go and I cannot mount the oter 300GB that sit on another partition. When I try to mount it through nautilus I have to enter my password and then get :Unable to mount 307 GB LVM2 Physical Volume
View 9 Replies
View Related
Jun 11, 2011
so excuse me if I don't use the correct terminology, but what I have are two USB external hard drives joined into one drive using LVM.I originally set this up using 11.2 and then used it for months on a system with 11.1. The LVM drive would show up in the file system as /dev/mapper/Media-Media.I then upgraded that system from 11.1 to 11.4 using a clean install and a "minimal server" selection. Now, the LVM doesn't show up anywhere. In the YaST disk partitioner, it shows a "/dev/Media" as being of the type LVM2 Media with no logical volumes
View 3 Replies
View Related
Dec 16, 2009
I did try to do an update from 11.1, but that killed the thing dead, no x, no kde, just a command line log in.So clean install, leave /home alone and we seem to be firing on all cylinders, except.Hopeless networkmanager still will not connect, it hasn't in any version of K4, truly, from my point of view, an embarrassment as the default network connector. But, trying to re-install WICD I have run into a snag.When I click on one click in Webpin, it asked if it should install it, Oh yes please, asks for the su password and. opens konqueror with the background description of the RPM. But will not install. I tried downloading the RPM and it gives me a bit of a list of dependency problems. None of which I can seem to resolve through the usual repos.Also in the 11.2 install I have been defaulted to the "desktop" kernel, when I used to have a PAE, should I change the kernel to PAE?
View 1 Replies
View Related
Mar 31, 2011
Recently I've gotten myself a VPS and tried to begin small - 512 MB Memory, 10gb HD.
Ubuntu 10.04 got installed on it and decided to make a user for myself besides root, installed a lamp enviroment and let that extra user own /var/www, since im the only one developing on the vps.
Then I ran the free -m command... shockingly it had 450 mb in use, and around 40-60 mb free (varieing around a bit).
Is this normal? If so - why are company's selling vps'es with 256 mb ram... thats just ... not logical ;x
Ran the free -m command again after letting it idle for about 5 mins. Same results.
the 'top' command tells me that the cpu is boring itself with around 1% use.. not a suprise with only lamp on it and 0 visitors yet =P
So ... why does ubuntu take up nearly all my precious memory? should I upgrade to 1 GB of memory to be completely safe I dont run out of resources or is something else going on here?
Discovered I was miss-reading the free -m command. To avoid confusion in the future I install htop, which is configurable to show a... nicer view of what's being used by what. Turns out I was using 50 mb.. >.>
View 1 Replies
View Related
Aug 23, 2011
I am new to opensuse, coming over from debian based systems. However I am having an issue in which my system will not power off on shutdown. Restarts just fine. i get a missing error during shutdown, but there is nothing to relate the error to on that line. Then the shutdown procedes to The System will be halted immediately then hangs. The keyboard powers off and then thats it. All fans are still running. I have searched extensively on this forum and google.
View 9 Replies
View Related
Aug 2, 2010
I've down loaded the live CD for SUSE 11.3 and, using isohybrid and dd, I put the contents onto a USB stick and made it bootable. All good so far.
I then installed SUSE on one of the partitions on my hard disk (Windows is also on the disk). I set 4GB for SWAP, 16 GB for ROOT and the rest ~270 for /HOME.
I set the bootloader to be installed in the MBR.
The installation completed with no problems indicated.
I was asked to reboot and did so, removing the usb stick so that 11.3 would boot.
The reboot failed! I was presented with a black screen and nothing else happened.
I tried again, selecting openSUSE 11.3 from the boot menu. - Again a black screen shortly after pressing enter.
I can boot in Failsafe mode and then login with text prompt. I can't boot into runlevel 3 (same problem - black screen)
Does anyone know whether this is a problem with network configuration or graphics?
I have a notebook with ATI Radeon Mobility HD 5650 graphics card and
ATHEROS ar8132 ethernet controller.
View 1 Replies
View Related
Feb 7, 2011
when i try to install the flash plugin and chromium in the open suse install remove tool it installs well and downloads but if i do anything else it hangs and makes all the OS unusable and i have to hard shutdown .. i tried to leave it to see if at least like that it can install but then the screen went blank(cause of power saving) and i oved the mouse to continue watching the progress and again it hanged... i am running opensuse 11.3 on an usb stick which i did using the dd_rescue method.it seems it has persistence.
View 4 Replies
View Related
Mar 3, 2011
I have openSUSE 11.3 with GNOME desktop.
I start up the machine and face the following problem after some time passes.
1. applications are loosing top bar containing buttons for closing, maximising minimising. they hang up afterwords.
2. i was downloading using firefox and found that instead of downloading files to download folder it is downloading in root. i tried to move files from root to other folders but it is giving "permission denied" message. Later i noticed it has lost all its history, bookmarks.
View 8 Replies
View Related
Apr 15, 2011
I have recently done clean installs of 11.4 on two computers and then done clean re-installs but still have the same problem. Each time, the install was without flaw and I could download the updates, when offered, in the install process. At the end of the install I can log into KDE and everything works. However, after shutting down, on reboot, I only get a command line login. I can either login and run startx or use su and do init 3 followed by init 5. This tells me I am getting to runlevel 5 but X isn't starting. Either of those approaches gives me the KDE login. However, after that I have to manually start the network in YAST. I also think I had had to restart CUPS but I have only got as far as installing a printer once so I can't be absolutely sure that happened. As I indicate, this is fully reproducible. Anyone give me a clue as to what is going on?
View 9 Replies
View Related
Jan 31, 2010
What is the best way to try and clean up orphaned files in openSUSE 11.2 gnome? My understanding is there is not a zypper command for this.
View 9 Replies
View Related
Aug 11, 2010
Upon boot up, I get lots of new lines added to log files in /var/log concerning apparent problems during boot up. The boot sequence does attempt to show the failure or success during each step as it transitions to the final run level, but is there a good manual or procedure on how to fix each transition, so as to cut down on the amount of pesky warning or error messages?
I am a bit concerned that running a system with warning messages is a bit like running a car low on oil. In the past the goal was to have a perfectly running linux system that came up all the way, and yes, I have seen such. This meant knowing how kernel things work, etc, but still, I would think we would want to pay attention to such things as
[ 1127.997470] ALSA usbaudio.c:1274: 2:1:1: cannot get freq at ep 0x1
[ 894.166132] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
and others and work to bring them to a minimum.
Right now I am working on things piecemeal as I go along, and it will take a lot of time.
I didn't dump the 10K's of log files into this message forum, in case someone asks to see the details, but I am just striving to have the system come up clean, and not with a message like:
Warning: Skipped 98 probes
(whatever that means?? did the kernel just mean that it knew that it is supposed to check 98 things but failed? or that 98 things should have gotten checked but didn't?)
View 3 Replies
View Related
Nov 24, 2010
I can't login due to my file-system being full. I found the main area with the large usage. Var/log is taking 99.5% of my var folder. On a full file-system scan Var/log is taking up 85% of disk use. File-system capacity is 36 gig. Temp is cleared after each boot.
What can I do to clean up any unnecessary files. I can only boot in safe mode and have limited navigation skills. To get scan results I booted a live-disc.
Opensuse 11.2 gnome 64 bit.
View 9 Replies
View Related
Mar 25, 2010
i,m just about to install 11.2 from 4 gig dvd, what is the minimum size to be able to install system, I will be triple booting with Win xp Ubuntu I'm just after reccomended boot size I wanna share Home with Ubuntu, windows will just have 15 gig for a game not using the home hope this makes sense
View 9 Replies
View Related
Apr 17, 2010
Following a zypper dup and turning my computer off for a few hours; when I rebooted, I got a message saying, "error: you need to load the kernel first press any key to continue . . . " And then it goes back to the grub menu for of the same if I select openSUSE 11.2.SystemrescueCD won't boot it. I've tried to "repair installed system" and "rescue" with my openSUSE 11.1 DVD -- it won't even acknowledge (as it were) the presence of 11.2 or the system on the other hard drive (though it does recognise the partitions).The PCLinuxOS 2009 KDE and GNOME live CDs will redo the MBR of installed systems (at least, as far I know, PCLinuxOS is one of systems). In my experience, the 11.2 live CD won't. I was hoping the 11.1 DVD would. What to do?
View 9 Replies
View Related
May 14, 2010
After installing 11.2 and selecting dvorak keyboard during the install process was surprised to see that was still in qwerty.
When then selected dvorak at session login, still wouldn't switch to dvorak. When checked loadkeys and other places in config files and system settings, all said dvorak -- but still could only get qwerty.
View 5 Replies
View Related
Oct 26, 2010
11.3 will not load after the first reboot during install, after the reboot the screen just goes blank and that's all.
This is a single setup no dual boot, from openSUSE-11.3-DVD-x86_64, on brand new Latitude E6510 laptop.
View 9 Replies
View Related
Jul 11, 2011
I've tried to load 11.4 first and 11.2 next. New HD New Asus/ Inte, Celeron 266 Mem 3g using KDE Everything loads but when I try to set up DSL I get message: This package needs to be loaded, SMPPD. [Click install]. After [Click Install], Whether I use Network setup with or without ipv6 option or Ifup with or without ipv6 I cannot connect to /download.opensuse.org. I've tried to load Kinternet but the problem is the same,
it can not connect. Repositories are connected and updated through Yast2.
[Code]...
View 3 Replies
View Related
Jul 20, 2011
I have a Kingston DataTraveler 112 8GB USB drive, and when i load openSUSE on it and slap it into my laptop (that is running Fedora 15 with no problems), i get this:
Code:
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found
boot: _
I have tried the 4.7 GB DVD image, and the KDE Live CD, and both shows this. Also i tried UNetBootIn (is that what it's called?) and it's the same too.
View 9 Replies
View Related
Nov 26, 2009
I just installed Opensuse 11.2, and have come across the following error upon bootup: the display manager screen refuses to load, unless I type STARTX at the cli line. the error messages read: failed services in runlevel 5 /etc/init.d/xdm.orig start returned 6 earlyxdm postfix Further, I am unable to activate the xdm service under Yast. Has anyone else run across this error? Not sure how to resolve.
View 9 Replies
View Related
Dec 28, 2009
I have Win7. I partitioned my C: and made a empty F:(97gb). I want to install 11.2 on F:.
1) At Sys Ananysis I get; The partitioning on disk /dev/sda is not readable by partitioning tool parted... You can use the partitions on disk /dev/sda/ as they are. You can format and asign mount points on them. But you can not add, edit, resize, or removefrom that disk with this tool. I click OK
2) New Installation, Use Auto Config
3) Time Zone
4) KDE (same results with Gnome)
5) Partition Based. I go to Create Partition Setup.
6) In CPS I get
[Code]...
View 9 Replies
View Related
Dec 22, 2010
I am trying to get OpenSUSE 11.2 working. Everytime I install it, it installs with errors but when the user I setup auto logs in to the GNOME desktop, the desktop never loads. I can get into failsafe mode sometimes. I've replaced the harddrive and installed it again = same issue. I've redownloaded and burned a different DVD, verifying the checksum, and running the "check media" option = same issue. I've done a repair install = same issue. I've removed the added Ethernet and modem cards and reinstalled = same issue. I've deleted all partitions from previous install and reinstalled = same issue. Currently, I just defraged the HDD on a windows machine and am running the install once more (one a completely different machine) but what's going on here? I need 11.2 for Clonezilla SE (not 11.3)
View 3 Replies
View Related
Jul 19, 2011
My problems connecting to DSL are caused by not having the linux-atm-lib file.
After downloading the file and trying to run it, the error message is: Could not find RPM package in pool.
Where is the RPM package?
This is a new install. So far everything seems to work except DSL connection.
View 4 Replies
View Related
