I have a cheapo Nvidea motherboard and an ATI 5700 graphics card. I wanted to know if there is a simple way to ensure that OS11.3 is using the ATI graphics card and radeonhd drivers instead of the Nvidea hareware+drivers. Is it necessary to blacklist the Nvidea drivers? Is there a simple YAST fix?
View 3 Repliesi am running 10.04 64 bit and did an update today and now i do not have any graphics card drivers and my virtual box is not working at all i have tried to reinstall the drivers through the hardware drivers and get told i have to look at the installation of this driver failed.
have a look at the log file for details: /var/log/jockey.log
and when i try to open my virtual box i get
Failed to open a session for the virtual machine Server 08.
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND).
[Code]....
i have to at least get some info off the virtual box
I'm new to Linux and Ubuntu 10.10. I installed Ubuntu 10.10 yesterday in my laptop. My laptop has ATI HD Radeon 4350 graphics card. Where I can find a correct driver for that card in Ubuntu?
View 2 Replies View Relatedhow I update my graphics card drivers. I've been googling all day long, and everything I find is just confusing.
View 9 Replies View RelatedI need help installing graphics drivers for my nVidia 8600GT.
View 3 Replies View RelatedI just installed Ubuntu 9.10, and it seems I'm unable to get the drivers for my graphics card. I know they exist, as I've downloaded them before (I switched back to Windows for a short period. Bad idea there. :/), and I know they work fine, but when I go to "System > Administration > Hardware Drivers" (where I've always gotten them from), they aren't there.
The only difference between this install and my old one, is that I used a USB drive to install, instead of a disk (I had run out).
Although I did have to change to boot order in the BIOS to get it to boot into the drive, I don't think that's the issue.
I have a Sapphire HD4850 X2 1G GDDR3 PCI-E graphis card, and presently I ruin a Windows 7 OS, but am moving to Ubuntu GUI Desktop, and was wandering where I could get Linux drivers for this card (and they are NOT available from the Sapphire site), or how I could get Windows drivers to work with this card, I do have 4 monitors using this card so I need the drivers and ability to use 4 monitors.
View 2 Replies View RelatedBefore we start, I wanted to say I noticed the "Ubuntu cannot fix or improve these drivers." Please read anyways.
I've tried to activate the "ATI/AMD Proprietary FGLRX graphics driver" from the System>Administration>Additional drivers and it has an error halfway through the process.
I use an ATI/AMD Radeon HD 5770 in my computer (if that helps), and Ubuntu is on my USB(8GB).
The error message I receive (after awhile of waiting) is :
SystemError: installArchives() failed
I'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
How to install this Nvidia Geforce 8800 driver. I've been told that the installation files I got will do everything - it doesn't. I've been told about some kind of xorg.conf file that doesn't exist- xorg.conf-vesa does though, I assume that's vesa drivers and theres something else for other drivers.
View 14 Replies View RelatedI'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?
View 5 Replies View RelatedLast night installed Fedora 12 64 bit KDE, but can't find the correct drivers for the above graphics card.
View 1 Replies View RelatedI want to install a new graphics card, Nvidia Geforce 9400 GT, into my system running Fedora 12, x86_64.
* Should I install the hardware into the system first?
* Or should I download the proper drivers and install them first, before hardware?
* Do I need to disable or remove drivers for my integrated graphics card (Integrated NVIDIA GeForce 6150 SE graphics) before I do anything?
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
View 3 Replies View RelatedWe are going to buy notebooks for our company and as Nvidia graphic card drivers are proprietary I would like to avoid them and support a graphics card company that offers free open source license for their graphics card drivers. Are there any such companies? ATI?
View 3 Replies View RelatedI have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies View RelatedCompletely new to Ubuntu, basically never used anything but Windows before, hadn't even had a chance to properly test out Ubuntu before I broke it. So, sorry if this question is very easy...or if I'm posting it in the wrong place...
Anyway, I cleverly installed the most recent drivers for my graphics card, and it killed Ubuntu - it won't start now. This happens on Windows, too, but Windows will System Restore for me. How might I fix this in Ubuntu?
I can choose Ubuntu from the grub menu, but then the screen goes blank, the fan on my computer goes into overdrive, and nothing happens.
Am currently running my Karmic Koala from LiveCD...
I have just installed Kubuntu 9.10 in my laptop and it did not ditected my Nvidia 8400 M GS graphics Card I downloaded a driver file
NVIDIA-Linux.x86-19042-pkg1.run to install drivers but when i run it it shows the error error:you appear to be running X server, please exit X before installing.
how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies View Relatedi have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
I am looking for a 802.11n wireless card that Linux supports that can be dropped into AP/master mode.
I would prefer PCI, but USB would be tolerable, just not preferred.
I've recently managed to install 11.4 with both Gnome 2.32 and KDE 4.6, moving from 11.3. However, there seems to be a significant speed degradation in terms of opening applications, switching windows, clicking on links etc. I have installed the Radeon graphics drivers from YaST, without much success. IMHO, Gnome seems slightly faster than KDE; however, it's still not great.
My machine worked well with 11.3 and seemed to be going pretty well; however, I wanted new and shiny, so. The PC has an AMD dual-core chip (can't remember the exact spec). Alternatively, is there good benchmarking software I could try to see if I can get an idea of my real speed?
I've lost my GUI while attempting to install the latest ATI proprietary driver. I followed their instructions on how to uninstall it but it didn't give me my GUI back. How do I get back to the default drivers that came with my installation? I have a Radeon 3850.
Booting into safe mode doesn't give me a GUI.
I want to try to reinstall the ATI proprietary drivers eventually. I have them on the hard drive, but I have had no luck installing them using the CLI so far.
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedI'm having a few problems with XOrg freezing while playing World of Goo (not the worlds most intense game for graphics, but seemingly too much for my rig). I initially posted on the developer's forums, but they said a full X freeze wouldn't be the game. Testing with BZFlag got me a full Xorg freeze even quicker than with WoG. Later I even tried glxgears to see how well it ran and even that froze the system! My only way of recovering is SysReq-REISUB.
Specs/system details:
2.4GHz Core 2 Duo (E6600)
2GB RAM
Radeon X1950XTX using the open source drivers
openSUSE 11.2 (64-bit - patched up to date and without an xorg.conf)
[code].....
So, is there a fix for the huge instability with 3D graphics, or am I stuck between a rock and a hard place with the options of outdated official drivers that may not work with the latest kernels (and would need manually rebuilding even if they did) or flakey open drivers that are guaranteed to freeze at some point, it is just a matter of when?
I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
I have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies View RelatedI have installed Opensuse 11.3 in my Dell Studio 1735 laptop successfully. With your help I succeeded in solve my wireless issue, but unfortunately it seems that I am having other issues.Frankly I am not perfectly sure that my graphics card is acting strangely, what I have noticed using Window Vista ( I have both in my laptop Vista and Linux but in two separately hard disk), the graphic level is superior (definition color, graphic effects and so on).Conversely, when I am using Opesuse, it seems that the graphic card is like powered down. So I am thinking that there is no hardware or firmware problem, but maybe drivers are not so uptodate.
Before getting back to you, I tried to solve the problem by myself: I tried to use every tool the KDE gave to me, but I did not find any parameter to change or error indication.