OpenSUSE Install :: GRUB Chainloading Removed Boot-flag
Dec 13, 2009
I had my BIOS complaing that there were no OS. (worked since releaseday of 11.2).
partition setup:
sda1 : primary : swap
sda2 : primary : ext3 : Kubuntu
sda3 : primary : ext3 : opensuse (flagged as bootable)
sda5 : logical
sda6 : logical
opensuses GRUB is primary and Kubuntus is chainloaded.
The problem occurred after I tried to boot kubuntu for the first time since I installed opensuse. Kubuntu didn't boot. so I probably set up chainloading wrong. No big deal, this I can fix.
The big problem was that after trying to boot Kubuntu no OS was marked as "Boot" in MBR. This is VERY strange. somehow the boot-flag is removed!
After setting the boot-flag (with a live-CD) everything works again. I can reproduce this.
I've tried to find answers but could'nt find any.
Is GRUB supposed to remove the boot-flag when chainloading? have I found a bug?
View 9 Replies
ADVERTISEMENT
Apr 30, 2011
I mistakenly removed my /home of openSUSE while trying to install another distro. My root pertition is OK. openSUSE is shown in grub. but i cannot boot into it as there is no /home is there any way to fix this without removing my openSUSE?
View 9 Replies
View Related
Mar 3, 2011
I have been having trouble setting up a daily backup script with cron. It would basically never worked. Searched the net for answers but didn't find anything. I finally figured it out !! When root crontab is edited the execute flag is removed from #/var/spool/cron/crontabs/root. I change it with #chmod a+x /var/spool/cron/crontabs/root and all is good.
View 5 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Jul 3, 2010
I used Windows to reformat my Ubuntu partition and now I can't boot anything. What's the best way to recover my netbook? I'm only able to use a 256 MB flash drive.
View 1 Replies
View Related
Dec 21, 2010
I'm setting up a dual-boot for a friend with Ubuntu Studio and Slackware 13.1. Slackware will be the primary OS and Lilo will control the bootloader. After doing some research it seemed to me the best way would be to chainload grub from the lilo menu, so when I installed Ubuntu I stuck Grub in the Ubuntu root partition instead of the MBR and added the following to Slackware's lilo.conf:
Code:
It's not working. It just errors out and asks me to boot something else when I select Ubuntu_Studio from the lilo menu. I've never tried this before so I'm sure I'm making a really basic error;
View 14 Replies
View Related
Sep 1, 2011
I'm running Ubuntu 11.04 and Windows 7 on a Dell Inspiron. On boot I get the GRUB menu listing Ubuntu (+ old versions) and Windows 7. However, if I boot Windows 7 all is fine until I reboot. On this next boot GRUB is gone and Windows boots. Ubuntu is still there, I can get into using my live-cd and 'repair' GRUB. After that, on booting GRUB is back and fine (including Windows 7). Does any one have an idea how to fix the booting/GRUB thing more constructive?
View 9 Replies
View Related
Feb 1, 2011
A little background: my primary install is fedora 9, I'm migrating to 14, and I need to change some partitioning (but not the F9, which is first on the drive). Because I installed a newer ubuntu a while back, I've been using ubuntu's grub2. That ubuntu partition needs to be moved, so I re-installed the grub 1 from F9 onto the MBR so the F9 doesn't depend on anything else.
This is when I learned grub 1 does not support booting ext4 partitions (which ubuntu uses). However, fedora claims that you can install grub 2 and have it chainloaded from grub 1, and in fact yum install adds a line to your existing grub 1 config to do so. That seemed like a nice solution since then all I would have to do is copy some grub.conf from the ubuntu partition into the F9 grub 2.
However, chainloading grub 2 does not seem to work very well. At all. I get to the grub 2 menu, but any option I choose -- including loading the F9 partition on which both grub 1 and 2 are installed, using the default config created by the installer, leads to an "unrecognized command" error, as if grub 1 was crapping out on a grub 2 config.
Anyone else had this problem? Better yet, has anyone done this successfully with any fedora version? I can backup ubuntu and copy it back in after I re-work my partitions, but while I'd prefer not to have to use grub 2 on the MBR, I'd still like to be able to boot ubuntu.
View 14 Replies
View Related
Dec 20, 2010
I multi-boot Windows XP and 5 Linux distros on a single hard drive. Some of the distros come and go but I keep at least two that are my daily use distros. My boot loader is grub1 located on a ext3 formatted distro. I have installed a distro that requests the partition be formatted ext4, which I did. I have been trying to edit my grub1 menu.lst so that I can chainload the ext4 distro get errors or it goes to the command line with the last word being Grub. My question is, can grub1 ext3 chainload a grub2 ext4 distro?
Here is a sample of my menu.lst
Code:
title MEPIS at sda7, newest kernel
root (hd0,6)
kernel /boot/vmlinuz root=/dev/sda7 nomce quiet splash vga=789
initrd /boot/initrd.img
boot
[Code]...
Mepis is the location of my menu.lst and is ext3 on sda7 and aptosid is the ext4 distro that I am trying to boot on sda9 and it uses grub2.
View 3 Replies
View Related
Feb 3, 2016
I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
View 4 Replies
View Related
Sep 2, 2010
I have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
View 1 Replies
View Related
May 18, 2010
I'm relatively new to ubuntu. I have an IBM X31 type 2672. It was running
windows 7 and ubuntu netbook edition 10.04. I installed windows xp after running these two OS' for a while to try and fix an issue I had with video playback. However, when I run the pc now it boots straight into xp. I have read the forums about reinstalling grub. However, the first command in the grub shell that locates the HDD doesn't work . Which means the other commands don't work
View 6 Replies
View Related
Mar 11, 2010
I have an old Dell Dimension 4500 that, until recently, had 2 hard drives. One drive is running Xubuntu Koala and the other was running XP. I had set up Xubuntu to run LVM.
After needing XP again for a small project I tried reinstalling XP, got disk errors, took the drive out to just have Xubuntu, and now when I boot I get "Error loading operating system".
I have tried restoring GRUB from a Live CD with no help. Everyplace I look on the net talks about restoring GRUB after installing Windows on another drive. I'm trying to get GRUB working again after removing the XP drive.
View 9 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
May 13, 2011
In previous versions, there was an 'advanced' button where you could select NOT to install grub. I can't find that in the latest Natty release iso's. Is it no longer an option? And if not, WHY? I find myself reloading Natty quite often on a test partition to play with various parameters in my attempt to get it working as needed. But I'd really prefer to have the option to no reload grub.
View 9 Replies
View Related
Jun 15, 2011
I use openSuSE and want to try Ubuntu.This is the layout of the partitions:
Code:
sda1 /boot (SuSE)
...
[code]...
View 12 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Mar 23, 2011
Alright, what I thought would be a simple task has me tied in knots.
I wanted to make a multiboot USB flash drive that I could easily manipulate to switch to various distros easily. My plans were:
1. Partition my 8GB drive to one large first partition (5GB) so that windows could access it. (P.S. GParted didn't partition correctly, needed to use fdisk. THIS MIGHT BE IMPORTANT IN SOLVING THE PROBLEM BECAUSE THERE MIGHT BE A BLOCK ERROR). I then made an extended partition with 5 500MB logical partitions.
2. Install Grub2 to MBR from Ubuntu
3. Expand ISO's of varios distros (Acronis Recovery, Puppy linux, etc.)
to the partitions, and create syslinux.cfg files for each (from the isolinux.cfg files that were already there)
4. Install syslinux to each partition's boot sector
Code:
#syslinux /dev/sdb5...
5. make grub.cfg on /dev/sdb1 chainload each partition.
THE GRAND PROBLEM:
Grub2 loads, but when selecting what I want to boot, I get the error
Boot error
which is syslinux, not grub2. So I know it's chainloading, but syslinux doesn't seem to find ldlinux.sys.
P.S. I'm not asking for other ways to make a multiboot drive, I know I can just direct boot from Grub2, but I want to be able to pass the boot to the boot loaders on the other logical partitions.
View 7 Replies
View Related
Aug 11, 2009
I am not much experienced with Linux systems and commands. I have been searching with Goggle and trying to solve. Today I had accidentally removed the boot grub menu list. There is a backup file. Now my system boots to >grub command. I have tried all sorts of things from live CD to boot the system I have tried Super Grub also. I am no able to go to the directory where the back up boot menu list is available and change the name from the live CD. Can any one help me with commands to go to the directory and rename the file for booting.
View 2 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Aug 20, 2011
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
View 9 Replies
View Related
Jul 18, 2010
In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
View 6 Replies
View Related
May 20, 2011
I am having problems Loading OpenSUSE 11.04_amd64 after Installation. I Dual Boot with Windows (on dev/sda) and Linux (on dev/sdb). I have been using Ubuntu_amd64 for a while and had decided to give other Linux distros a try. I tried Debian but I ended up downloading and installing a bare-bone version and I couldn't go anywhere with it as, I am a Linux noob.
I have now downloaded and tried to install OpenSUSE 11.04. Installation was smooth but OpenSUSE will not boot. I get a black screen which says Grub Error and something like 'file not found'.
View 5 Replies
View Related
Apr 29, 2011
I have successfully dual booted Opensuse and Windows7 successfully, but I have to load it from the CD choosing the boot from hard drive option.
If I do not have the Opensuse CD inserted it goes to Grub Legacy and gives me the option to boot from Arch Linux, or Windows. There is no option for Opensuse and when i hit the Archl Linux option I get errors and it brings me to the /rmfa (I think) command line. Selecting Windows lets me boot to into Windows successfully.
I checked the /boot/grub/menu.list in Opensuse and everything seems to be fine, but these options do not appear on my boot loader.
View 5 Replies
View Related
Nov 27, 2009
I just did an upgrade from 11.1 to 11.2 and can not boot to OpenSUSE any more. That happened when the first reboot was starting after finishing the upgrade from the DVD. I tried to find the issue and use the repair system with no luck yet. Now I get no gfx for grub
The only thing I managed is to add the windows boot section for windows but I can not seem to boot to opensuse. device.map:
Code:
(hd1)/dev/disk/by-id/ata-ST3160815AS_5RA2LTD0
(hd2)/dev/disk/by-id/ata-ST3160815AS_5RA2LQCJ
(hd0)/dev/disk/by-id/ata-Maxtor_6L160P0_L31AHTVG
device.map.old
[Code]...
View 9 Replies
View Related
Dec 4, 2009
I have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said
splash=silent
and
quiet showopts
I was wondering what they meant?
View 2 Replies
View Related
Jan 20, 2010
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
View 7 Replies
View Related
Jan 28, 2010
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
View 7 Replies
View Related
