OpenSUSE Install :: Eee Pc Starts Makes The Start Sound And Then The Good Bye Sound And Repeats That?
Apr 25, 2010
I've got an urgent problem! I had some viruses as my program told me and in the end I had to restart my eee pc!Problem is now after it starts and you click on the log me in icon for the netbook it makes the nice hello sound, takes some time and then does the shut down (goodbye) sound. So basically the netbook booted already right? But I cant log myself in! What can I do?
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
After becoming somewhat disillusioned with a number of other distro's I decided to turn to debian and I must say I like it! Install was a breeze, I even did my own partitioning instead of letting the installer handle it ... I've since come across one of the same problems that I encountered on all the other distro's I've tried so far.I'm using:
Squeeze 2.6.32-trunk-amd64, Intel Core2 Quad (Q9550) Asus Pro Turbo main board,
[code]....
It seems that simply unplugging all USB devices and rebooting was all I needed to do.The other sound issue I have (that also occurs on a number of other distro's) happens when I launch Blender. If I have music playing when blender is launched the sound cuts out. If I kill the music player and restart it the sound is back.Below is my audio controller;
I used fedora 11 with no problem. Then I did a fresh install of fedora 12. The laptop started making some strange noise something like water dripping or like that. I noticed this long back but I couldn't describe the problem so I waited if I can find something on my own. Even now I'm not sure if anyone can understand whats going on. Just trying my luck. To make sure it was not my laptop( hardware ) problem I went back to fed 11, no strange sounds there. Same thing happened when I upgraded to Ubuntu 9.10 from Ubuntu 9.04. I'm no expert in operating systems. I do not know what is common in Ubuntu 9.10 and fedora 12 , but they are giving the same problem.
For some time now, my laptop makes a quick but loud buzz sound when I shutdown or restart it. Muting my sounds doesn't fix it. Before, it didn't do this. It just started one day and got worse till it happened everytime I shutdown or restart.
Going to preferences > sounds > changing sound theme to no sounds helped a bit and after doing this, it doesn't happen all the time anymore. This is quite disturbing especially when I'm in libraries. What worries me the most though is that it might affect my speaker.
Iam tring to install 11.4 on my new computer, when i start the computer the green screen pops up and syslinux starts. However when it finishes loading a dialog box pops up saying "Make sure that cd number 1 is in your drive" . Obviously it it is, because i am booting from the dvd. I dropped to the shell where i saw this message "Inappropriate ioct1 for device". What does all this mean.
I recently started having a strange problem: whenever skype makes a sound, e.g. when a contact logs in or out, rhythmbox puts itself into paused mode. this is even reproducible. when I go in to the skype settings, sound devices, and click on "Make a test sound", rhythmbox pauses whatever song it's playing. here's some debug output:
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
With OpenSuSE 11.2, I would have a guest account running skype, and a media account running mythtv (both users logged in at the same time using switch user). I had skype on auto answer incoming calls, and I remember watching a movie when I suddenly heard my Dad's voice appear calling my name. That was cool!
Now that I'm using OpenSuSE 11.3 (both were using KDE), skype only plays audio when that user's session is active. Switching to the media account will prevent skype from starting to play any sound. Switch back, sound is normal. If I remember correctly, now the skype audio cuts out as soon as I switch user.
I also have a tv capture card which only STARTS to captures analog audio when the media session is active, mythtv being run by the user media. Once the show is started to record with sound, we can switch users and the show continue to record with sound.
The only thing that should be configured differently from the default install is that I compiled mythtv (it wasn't available as an rpm when I upgraded to 11.3, and haven't bothered to check since).
I installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD Sound Blaster X-Fi Xtreme Audio Asus Xonar DS
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
openSUSE 11.2 64bit libxine1 from Packman 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System: OpenSuse 11.2 (it is a pretty fresh install) OpenSoundSystem 4.2 KDE 4.4 (updated from factory repos)
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
Since I upgraded to Ubuntu 10.40, I no longer have sound, except for the Ubuntu sound when it loads during start up. Does anyone know how I can recover sound on my computer?
I have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it. The laptop is a Compaq Presario CQ45-307tx (more specs at link below) [URL] The first thing I tried was I updating the alsa firmware using the konsole command "zypper install alsa-firmware". The firmware updated fine, but still no sound. The next thing I tried was editing a file based on the advice found at the link below. [URL] This didn't work either, but I wasn't too optimistic to begin with due the differences between our systems.
I have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below) Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
