OpenSUSE Install :: Blank Screen After Upgrade From 11.2 To 11.3 (NVIDIA FX3800)

Jul 16, 2010

I have just performed an upgrade from OpenSUSE 11.2 to 11.3. My Machine is a Lenovo W701DS laptop which uses an NVIDIA FX3800M graphics card. The system was working fine under 11.2 before the upgrade.

After upgrading to 11.3 the splash screen after GRUB comes up for about 1 second before the screen goes blank. After about 5 mins I am able to SSH to the Laptop and access the system. Doing this I created an xorg file using "X -configure" and copied the new file to the /etc/X11 directory and renamed to xorg.conf.

If I SSH to the laptop change run levels to init 3 then init 5 the Gnome comes up and I have graphics the system works However I am unable to access the text consoles using alt+f1, f2 etc. If I restart the system it is back to the blank screen.

I have attempted to install the NVIDIA drivers however the installation fails due to an error with gcc or kernel source versions. Error log reports that the kernel was complied using a different version of gcc.

View 3 Replies


ADVERTISEMENT

OpenSUSE Install :: Blank Screen After 11.3->11.4 Upgrade?

Apr 3, 2011

I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.

Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!

[Code]...

View 8 Replies View Related

OpenSUSE Install :: Getting Blank/black Screen After Performing Upgrade From 11.2

Sep 8, 2010

During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!

HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.

View 9 Replies View Related

OpenSUSE :: Blank Screen After Installing Nvidia Drivers?

Mar 15, 2010

I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package

View 9 Replies View Related

Fedora :: Nvidia Driver Install Not Blank Screen?

Oct 22, 2010

Running 2.6.33.3-85.fc13.i686 and just purchased a AGP 7600GT 512 video card. Searched around and found:I did the rpm, yum, sed, mv & dracut as directed. Then I rebooted. When it starts up (all the normal bios messages) and then I 1/2" bar across the bottom of the screen with Fedora 13 on the right end and .... nothing. Just sits there. I've used my Live-13 disk and tried to reverse the procedure but I'm starting to think it's the video drivers.

View 4 Replies View Related

OpenSUSE Hardware :: Blank Screen Using Nvidia Drivers - Nv Driver Works Fine

Dec 10, 2009

I have just installed OpenSUSE 11.2 on an Intel DQ35JO motherboard and XFX 9500GT 512MB video card. After installation the desktop looked fine on the Sony LCD TV I have connected to the 9500GT via a DVI to HDMI cable.

After the first reboot after installation I added the Nvidia repository via the add community repository function in the software sources option in YaST2. I then proceeded to install the Nvidia G02 drivers and the nvidia-settings package. At this point after a reboot I would get a blank screen. Hitting ctrl-alt-F1/F2/F3/F4/F5/F6 has no effect, I could not get any of the virtual consoles to appear. I had to SSH into the box and reboot into runlevel 3.

Once I had rebooted into runlevel 3 I logged in as root and executed "sax2 -r -m 0=nvidia" and got an error message that the configuration server could not be started. I tried executing "sax2 -r -m 0=vesa" and received the same error:

[Code]....

View 9 Replies View Related

Debian Installation :: Black / Blank Screen - Nvidia Driver Wouldn't Install

Apr 29, 2011

After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.

View 1 Replies View Related

OpenSUSE Install :: Screen Goes Blank After Booting Up?

Apr 15, 2010

So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.

View 4 Replies View Related

OpenSUSE Install :: Blank Screen After Installing 11.2?

May 7, 2010

After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:

1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg

[code]...

View 4 Replies View Related

OpenSUSE Install :: Blank Screen After Sax2?

Jul 5, 2010

i installed, few days before susu 11.2 . now my lcd only has resolution of 800x600, so i type "sax2". after he made that config, suse displayed me a gui, where i can change resolution and my frequency. i selectet native resolution and freq. (the right nvidia driver and lcd was detectet) and hit that apply button, then i needs to restart. done it, but then i got after that loading bar of suse only blank screen. so what was wrong ? and what i can do now to fix ?

View 2 Replies View Related

OpenSUSE Install :: Blank Screen After 10 Minutes?

Aug 29, 2010

I have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.

I have tried:

- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"

View 9 Replies View Related

OpenSUSE Install :: Blank Screen On Boot?

Nov 13, 2010

A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.

View 9 Replies View Related

OpenSUSE Install :: Blank Screen After Start Up

May 11, 2011

After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.

View 3 Replies View Related

OpenSUSE Install :: Booting After 11.3 Install - Hangs At A Blank Screen ?

Jun 8, 2011

I recently tried to upgrade my openSuSe 11.1 system using the instructions at:

SDB:System upgrade - openSUSE

I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?

View 9 Replies View Related

OpenSUSE Install :: 11.3 M4 Installed - Blank Screen At Boot?

Mar 28, 2010

Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:

33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:

Section "Device"
Identifier "Configured Video Device"
EndSection

[code]...

View 6 Replies View Related

OpenSUSE Install :: 11.2 Starts To Boot Then Blank Screen And Nothing?

Apr 18, 2010

I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.

Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB

Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.

I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.

View 9 Replies View Related

OpenSUSE Install :: Blank Screen & Mouse After Bootup

Jul 18, 2010

I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.

I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.

View 9 Replies View Related

OpenSUSE Install :: Grub - Not Able To Boot 11.3 / Screen Blank?

Aug 1, 2010

I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.

I did get a warning that GRUB over 128GB might not be able to boot.

I did enable the MBR.

GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.

I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).

View 3 Replies View Related

OpenSUSE Install :: Power Consumption With Blank Screen?

Jan 7, 2011

I have installed a new PC system

- OpenSuSE 11.3, 64bit
- AMD Phenomen II X4
- ASUS M4A88TD-V Evo/USB3
- 3 hard disks
- etc.

After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.

View 5 Replies View Related

OpenSUSE Install :: Display On 11.4 - The Screen Gets Blank (for About A Second) Every 40-50seconds

Apr 4, 2011

i just installed opensuse 11.4 on my system(gigabyte 7n400pro2,amd athlon xp 2.8ghz,ocz vertex2 ssd,ati radeon x1550) and i have this strange problem: the screen gets blank(for about a second) every 40-50seconds. everything else works fine.

View 5 Replies View Related

OpenSUSE Install :: Screen Blank After Login / Resolve This?

Aug 7, 2011

Just installed 11.4. First effort with OpenSuse but have previously used Ubuntu on another machine. Installation went great. After I log in the screen goes blank with just a mouse cursor, everything else is black. Boots okay in recovery mode.

This is a dual boot with Windows XP. Machine boots into windows as expected.

View 8 Replies View Related

OpenSUSE Install :: 11.4 - Displays Blank Login Screen?

Aug 13, 2011

I have opensuse 11.4 installed with both gnome and kde. These are the things I did before the problem:

1. changed the login screen to oxygen login screen

2. Then I logged off and when again logging in, I chose the session as Metacity.

But unfortunately, the the blank splash screen appeared and it didnt get into the desktop. Then I did a hard restart (By pressing the power button). Since then, I cannot login. The login screen is blank left only a active mouse pointer. Even booting into failsafe also didnt work.

By the way, I have chosen the option of directly logging in without password prompt at login. (during installation)

Only a week before i did a clean install since i corrupted the grub, dont wanna install again.

View 8 Replies View Related

OpenSUSE Install :: GUI Will Not Load - Blank Screen On Live Boot

Jul 1, 2010

I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.

I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.

View 2 Replies View Related

OpenSUSE Install :: Blank Screen After Boot - No Present Windows

Nov 4, 2010

For some reason, sometimes after I just turn the computer off by pressing the power button while hooked up to the video mount, I'll turn the computer on and (after it automatically logs into the standard user) come to a blank black screen. The only thing I can access is by pressing Alt+Tab to get a "no present windows" window, and thats it. Could it be that an activity or something has been deleted somehow?

View 1 Replies View Related

OpenSUSE Install :: ATI Driver Installation - After Reboot Got A Blank Screen

Apr 14, 2011

I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?

View 9 Replies View Related

Fedora :: How To Stop Screen Going Blank (F11 Nvidia)

Jan 28, 2010

My F11 system display goes blank after some time of inactivity and I cannot see how to disable it. It does not appear to t eht screen savers (all turned off). I have an NVIDIA card,, is it in the card?

View 8 Replies View Related

Ubuntu Installation :: Blank Screen After Trying To Use Nvidia-173 In 10.04

Apr 25, 2010

I did a fresh install of 8.04 alternate disk with LVM then updraded to 10.04 (due to lack of any spare CDs around).

Everything was working fine but wanted to try to get the nvidia-173 drivers installed (I have an old FX5200). Can't start into X now as my plasma says mode unsupported.

At one point I managed to boot into recovery mode then root terminal and removed all nvidia packages and reinstalled nvidia-173 only and followed the instructions listed on the 10.04 release candidate page. Still stuck with the unsupported modes error on my TV though. I have a 720p plasma display (1366x76, I usually run 1280x768 without issues. I'm guessing it is the refresh rate set in the new xorg.conf that is throwing me off, how to adjust this?

An issue that's complicating things however is that when I try to boot into recovery mode I get an error stating 'pcspkr' driver already registered, aborting... then it hangs there until I ctrl-alt-delete and force a restart. This is preventing me from getting to the point where I can select a a root terminal to try to fix my errors.

I have used 8.04 exclusively for a few years and wanted to try something new (still not all that adept at linux setup).

EDIT: I managed to get to root again and just removed the xorg.conf file and that seems to work somewhat. Except now I can't boot as I get a looping mountall: Plymouth command failed that hangs up the process.

View 1 Replies View Related

Ubuntu :: NVIDIA Quadro NVS 450 - Blank Screen

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards. The problem is that, after that, all what you get is a blank screen, with not even a cursor. The same happens when you install Lucid: blank screen with no cursor. Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset. In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

OpenSUSE Install :: Blank Screen After Installing On Core I3 (VGA Intel HD 4500)

May 8, 2010

I installed 11.2 on a Lenovo G460

CPU: Core i3
Graphic: Intel HD 4500

And I got a black screen. Installation media (DVD) is healthy.

View 1 Replies View Related

OpenSUSE Install :: Blank Screen While Starting LIVECD (Gnome/KDE) On Proliant 160 G6?

Oct 11, 2010

I want to install Suse 11.3 on a Proliant server. I thought not to take the obvious Windows CD's (little sorrow now) and try Linux. I used an USB Live CD to start. I tried all the startup options like apci=off and so on. Also tried lower resolutions and VESA. Still no luck. After running and starting (seeing in ALT-F4 the Kernel loading), all ALT screens get a blank black screen. Only option is to restart, while then SUSE is displaying it is going down.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved