OpenSUSE Hardware :: Blank Screen Using Nvidia Drivers - Nv Driver Works Fine
Dec 10, 2009
I have just installed OpenSUSE 11.2 on an Intel DQ35JO motherboard and XFX 9500GT 512MB video card. After installation the desktop looked fine on the Sony LCD TV I have connected to the 9500GT via a DVI to HDMI cable.
After the first reboot after installation I added the Nvidia repository via the add community repository function in the software sources option in YaST2. I then proceeded to install the Nvidia G02 drivers and the nvidia-settings package. At this point after a reboot I would get a blank screen. Hitting ctrl-alt-F1/F2/F3/F4/F5/F6 has no effect, I could not get any of the virtual consoles to appear. I had to SSH into the box and reboot into runlevel 3.
Once I had rebooted into runlevel 3 I logged in as root and executed "sax2 -r -m 0=nvidia" and got an error message that the configuration server could not be started. I tried executing "sax2 -r -m 0=vesa" and received the same error:
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
I have an Acer Aspire One AOA110 (SSD version that came w/ Linpus Lite) that my brother gave to me several months back when it stopped working. I've been trying various ways to revive it or make it useable, but haven't had any luck so I figure it's time to look to the community for ideas. I have already updated the BIOS to the latest (v3310) version, so I don't think it's the common issue these netbooks have where they don't even post. I'm kind of thinking the GPU died halfway or something. If I could just get it to work in a command line only mode, I'd be happy.
The netbook will post fine, but when I try to boot into Linux, the screen will go blank part way through the boot process. I don't ever remember hearing sound afterwards so I don't know if just the screen is blank or if the computer is locked up as well. I have tried several distros, but all of them seem to run into the same issue. Some with text based installers (Debian) get all the way through the install, but won't get all the way through the boot process. I'm only trying to get to a command line, not into X or anything graphical. Arch Linux also uses a text based installer, but I couldn't even get into the installer before the screen goes blank. I've tried changing some of the kernel options such as nomodeset, vesa and framebuffers options, but didn't have much luck with them either. I've also tried some older versions of Ubuntu (I think back to either 8.04 or 8.10) and tried the text installs, but I can't remember if I couldn't get into the installer or if I just couldn't boot, I want to say I couldn't even install. Mind you it's not random, it's always at the same point for a particular distro.
So the other small twist to this all is that FreeDOS works fine, besides not being able to get the sound card or network card working. I can play games, set different resolutions in ZSNES, etc. This seems a little odd to me, but I'm hoping it makes perfect sense to someone reading this.
I want to be able to run Linux with a command line interface, but I can't find the right distro/settings/whatever that it stays in the video mode (vesa?/framebuffer only?/I'm not even sure what to search for) where I keep the display and get to a command line. Any thoughts on what's happening when the screen goes blank or what I can do to get Linux working on here again?
I have downloaded the recommended NVIDIA driver for my Quadro FX 1400 graphics card which has 256 MB RAM. I have my laptop in a docking station and from the docking station is a DVI to HDMI converter then HDMI cable to my TV (the idea is to use it as an internet TV slave! ). When I come to configuring the NVIDIA X Server, it correctly detects both my laptop screen and my TV via the HDMI connection. However, when I come to save the settings for the X server and go to restart it, it cannot save the configuration file. This is most annoying as it does not allow me to use the dualview I need.
The second problem comes when I use something like the BBC iplayer or anything that uses the flash player. I have the latest flash player with Firefox which works fine in non-full screen mode. However, when switching to full screen, the CPU load jumps to 100% and the playback is really jerky. Had this running the beloved windows XP before and could handle full screen no problems. I have seen a few posts here which show workarounds to zoom in on the small screen on Firefox but would prefer to run it in the full screen mode.
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
Running 2.6.33.3-85.fc13.i686 and just purchased a AGP 7600GT 512 video card. Searched around and found:I did the rpm, yum, sed, mv & dracut as directed. Then I rebooted. When it starts up (all the normal bios messages) and then I 1/2" bar across the bottom of the screen with Fedora 13 on the right end and .... nothing. Just sits there. I've used my Live-13 disk and tried to reverse the procedure but I'm starting to think it's the video drivers.
System:Tri-head, dual-card: GeForce 9500 GT, GeForce 8400 GS Dual-boot: openSUSE 11.4, Ubuntu Natty Driver: nvidia proprietary (260.19.44 in openSUSE, 270.30 in Ubuntu due to kernel version) xorg.conf: same for both Results: All three heads work just fine in Natty; secondary screen fails in openSUSE:
Code: [25.164] (EE) NVIDIA(1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please [25.164] (EE) NVIDIA(1): check your system's kernel log for additional error [25.164] (EE) NVIDIA(1): messages and refer to Chapter 8: Common Problems in the [25.164] (EE) NVIDIA(1): README for additional information. [25.164] (EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device! [25.164] (II) UnloadModule: "nvidia" [25.164] (II) UnloadModule: "wfb" [25.164] (II) UnloadModule: "fb"
But nothing is jumping out at me in the output of dmesg. I also don't see any additional system or kernel logs in /var/log. I'll google some more on that front. One other fun fact: nvidia-settings fails to run in openSUSE. Unless I launch it under gdb. Then it starts up and runs as expected. (And the second screen ain't there, as expected.) Here's (what I think are) the relevant items: Xorg.0.log - Pastebin.com dmesg - Pastebin.com xorg.conf - Pastebin.com Additional output available upon request.
i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,and after logging off i confront with a blank screen,so i remove akomd-nvidia [yum remove akomd-nvidia] and also yum erase xorg-x11-drv-nouveau [yum erase xorg-x11-drv-nouveau]but still no gui,i think i should install:
yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 [but i didn't] so how can i have my gui back?
I recently followed instructions to enable the nvidia driver. run the following commands:
[Code]....
then rebooted, a tricoloured loading bar appeared and finished, then all i got was a blank screen with flashing cursor. I don't get a prompt to login and can't access my account. I am dual booting on this machine with ubuntu, is there anyway i can restore my fedora partition and enable my nvidia graphics
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
I have just performed an upgrade from OpenSUSE 11.2 to 11.3. My Machine is a Lenovo W701DS laptop which uses an NVIDIA FX3800M graphics card. The system was working fine under 11.2 before the upgrade.
After upgrading to 11.3 the splash screen after GRUB comes up for about 1 second before the screen goes blank. After about 5 mins I am able to SSH to the Laptop and access the system. Doing this I created an xorg file using "X -configure" and copied the new file to the /etc/X11 directory and renamed to xorg.conf.
If I SSH to the laptop change run levels to init 3 then init 5 the Gnome comes up and I have graphics the system works However I am unable to access the text consoles using alt+f1, f2 etc. If I restart the system it is back to the blank screen.
I have attempted to install the NVIDIA drivers however the installation fails due to an error with gcc or kernel source versions. Error log reports that the kernel was complied using a different version of gcc.
I switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.
I downloaded:- i2400m firmware 1.5.0 WiMAX Tools 1.4.5 WiMAX Network Service 1.5.2
According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.
Then comes the part to install the firmware. The command I used was
Code:
But unfortunately and annoyingly the result is
Code:
I didn't get it. Am I missing any package or something?
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its
This is my first time with openSuse as I have heard that openSuse is better forlaptops then ubuntu is. On this laptop, I had already installed ubuntu but decided I no longer liked ubuntu very much, but for no real reason. I encountered almost the exact same problem using both ubuntu and kubuntu, but I had more problems on top of the graphical problem - so I decided to give openSuse a try. I love it so far!Anyway, to the point - I have an Nvidia GeForce GT330M. I have tried installing the drivers the "easy way" and the "hard way" and I have even used the script lnvhw, all to no avail.
What seems to happen is that, after I install the drivers (from runlevel 3, of course), as soon as I restart my computer it initially loads just fine. However, after the loading bar shows up, I get dropped into a console login (tty1), and tty7 & 8 show absolutely nothing, except a blinking cursor.I have two graphic cards in my computer -- an Intel HD card. This is loaded normally and, from "My Computer" it is the graphics card in use, as far as I can tell. The other, as I said, is the nVidia GeForce GT 330M. I'm not much of a "power" user, so I'm not really sure where to start with finding the issue
I have to hold a presentation using a projector in a few days and I have to bring my own laptop, so I tried hooking up a second monitor to test if it works. As it turns out, the second monitor works fine, but then my main screen is messed up. I'm using Ubuntu 9.04 and I'm doing this on a HP Pavilion DV4000 laptop. My main screen shows just the bottom (cca) 400 pixels of the wallpaper, no bottom panel, no desktop icons. And I'm kind of scared to remove the second monitor now cause I don't know what I'll do if I don't get the main screen back.. Well, other than installing 9.10 beta that is..
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
I just installed 11.2 kde desktop everything works fine except no sound when I play ..... and watch movie online worked with my audio and video files in my computer only
I installed Natty on it with the machine hooked up to a Samsung LCD with a 1680x1050 resolution over DVI. No problems at all. I want the box to pretty much output MP3s and web video, so I'm not needing much. When I take the box and hook it via DVI to my LCD, I get a blank screen on boot up. I try sticking the natty CD in it, and I get a blank screen trying to live boot it too. The LCD doesn't do 1680x1050, so I brought it back to my Samsung and set the default resolution to something nice and safe: 1280x1024. Still the same behavior. When I take splash mode off, I see a "load fallback graphics devices fail" error as it is booting up. Hard for me to think the driver is the fault here when it works on my over LCD just fine.
On my Acer netbook (AOA-150-1635) the wireless works fine with WinXP, Ubuntu, and used to work with Suse 11.1. I replaced the Suse 11.1 with a clean network install of Suse 11.2. I couldn't get the wireless to work and did another network install using the wireless. When the install was completed I could not get the wireless to work with Suse 11.2. When I run the "collectNWData.sh" it shows--
!!! CND0120E: Network card wlan0 has no IP address wlan0 Interface doesn't support scanning : Network is down
[code].....
I looked up error CD0120E and changed the network devices setup to "traditional". The wireless "scan" picked up the routers and I added the encryption keys. Still no joy. I ran "collectNWData.sh" again and it said it is better to use the Network Manager.
!!! CND0180I: The system can't ping external IP address 195.135.220.3 !!! CND0150E: There might be a problem with the default gateway definition 10.1.1.1 on interface eth0
[code]....
Going back to Yast, Network Devices, I set Network Manager. The result is that it is back to the beginning with "collectNWData.sh" giving the original error.
I am unable to connect to a WEP-protected network. the Network manager log shows either a DHCP timeout, or a failure to associate. (attached below).Changing to WPA is not an option, as the network is not controlled by me. This is with the rt61pci driver for a Ralink 2500 series chipset.(Rosewill RNX-G300EX card)Manually forcing an IP does not result in a connection either. This is with the latest OpenSuSE 11.4, all patches applied. Router is a D-Link DIR-613, and I know the passphrase I'm using is correct because it connects both on my Android (what else?) phone, and my lappy when I boot XP.
I used to watch HD videos on my pc like h.264 720p videos, When I watch them on winxp there is no problem at all it works perfect on my nvidia 6200 LE but when I try on my ubuntu it has a small lag on this type of videos and it eats most of my core 2 due (3 GHZ) cpy approx 85%.
I installed the nvidia driver 185 from the ubuntu official repos. I am using the same movie player on winxp and ubuntu which is smplayer the only difference is on winxp the output driver set on windows to (DirectX) but set on ubuntu to (xv).
I feel a small lag too in my compiz effects, I tried ubuntu on other pc it works more faster and the effects much faster than on my pc.
When I mount Debian 8 live into VMWare Player 7.1.2 64bit, it works awesome with and without graphics acceleration enabled i.e I can get into the desktop and all that.
But, when I installed it, the reboot is just a blank screen. I am not sure how I can proceed from now.
Just had to replace the hard drive on my wife's iPod Classic 6th Generation. Now I cannot mount the device. It works fine on Windows and Mac computers. I have tried formating it on both Windows and Mac, I've done restores through Itunes on both. Here is what I get in my /var/log/messages
I can connect to the Internet on my WLAN just fine (using Opera) and can dload torrent files (using the same).
However, I have had trouble accessing some community repositories in the past, cannot synchronise with an NTP server (annoying since my battery is low and time and date are reset most reboots) and cannot use the lyrics function or Wikipedia function in Amarok. Nor can I connect to the net using Firefox (though conqueror works just fine...) I cannot download torrents on KTorrent either.
It seems that there is some sort of 'permission'/connectivity issue.
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
i installed fedora 12 on my pc and I also installed the ati drivers from atiand i rebooted and booted back in fedora all i get is a blank screen that does nothing
I've run into a strange problem with GDM that I haven't managed to find a solution for yet, either by trying myself or googling, and I have run out of good ideas. I'll just infodump here about the problem and what I've tried etc;
I installed Ubuntu on a new PC a few weeks ago, setting it up with autologin for my mom and a separate user for myself, using the on/off-icon menu in the top-right corner to switch to my own user and back as needed, and logging the user out when done. This worked quite well.
However, a few days ago, this stopped working; logging out or trying to switch now leaves me with a blank black screen, without even a mouse pointer (but not off, the backlight is on).
EDIT: To clarify, this is an issue that only affects the GDM login screen, but that affects it whenever it is used, wether it is on boot (when not set to autologin), after logging out, or when trying to switch user.
At this point, I can usually use Ctrl-Alt-F1 to get a textmode login, and Ctrl-Alt-F7 to get back to the auto-logged in session (assuming I tried to switch, not logout).
I can't think of anything specific I did or installed around then that should be related in any way...
I tried disabling autologin and restarting gdm, which left me with the same black screen (which is still there after rebooting), instead of the expected login window. I managed to re-enable autologin by manually editing the /etc/gdm/custom.conf file, so that it would at least work for mom.
I've also tried to change which user is auto-logged in, thinking it might be a problem with my user account, but both users get an automatic session just fine when I restart gdm.
I thought it might be a problem with the video driver, but that's not the case - if I run zenity --info as root with DISPLAY set correctly, the dialog box appears on the screen just fine. It has no borders or titlebar (there's no windowmanager), and is apparently without keyboard focus, so since there's no visible mouse pointer I can't click the OK button... But since it appears, X is apparently up and running just fine, just has nothing to display other than a black background.
I tried purging and reinstalling gdm and gnome-session(-bin|-common), but that didn't help any.
Running ck-list-sessions after trying to switch indicates that there's a new session there, with session-type = 'LoginWindow', so it appears to think everything's fine.
Enabling debug output in the /etc/gdm/custom.conf file did get me some more debug output in the gdm logs, but it didn't really tell me anything, there weren't any obvious problems that I could see.
After some looking around, I've guessed that it's supposed to be running gdm-simple-greeter, which I assume would display a login box; trying to run it manually doesn't work though (it's missing some environment variables, and trying to add them based on the abovementioned debug output doesn't really help).
I am running my wifi using YAST and IFUP. The card is a zd1211, and works just fine. However lately I have have to "start" it manually after booting. The only way I have found to do this is to open YAST >network settings> and "edit" the card, but NOT change anything, just click through the next buttons and it connects. I have tried using the settings "on boot" and "on hotpug" but always when I reboot, I have to go through the YAST rigmarole. This is a PITA. I am trying to avoid NM as I want to sort this out, not cover it up with more software.
