General :: Is Anyone Able To Install Xenserver By PXE?
Sep 27, 2010
Is anyone able to install Xenserver by PXE? I'd really appreciate some help, I've read and and tried all of the documents issued by Citrix/Xen, but because I am so new to Linux in general I haven't been able to get it working.
If anyone can help, I have got as far as the 'client' server to pick up a DHCP address, but fails at the PXE-E32 Open Timeout error message, now I'm stuck, I have a feeling my TFTP isn't configure correctly and I am not sure if I need NFS installed or not, the document is not clear.
I created an OpenSUSE 11.4 PV guest on XenServer 5.6, and about half the time, it fails to finish booting. it starts all the services, and fails immediately before it would display the login prompt. I've spent hours googling for this problem, and can't find any reference to it anywhere, meaning that I may be the first to experience it.
has anyone else done OpenSUSE 11.4 on XenServer 5.6 and had this problem? were you able to resolve it, and how?
I have installed Citrix Xen-Server on my server and managed to install Windows 2003 R2 Server successfully.I also installed CentOS 5.3. The installation went fine, however, I cannot get Gnome or KDE going. I only have the text interface.
Are there any special steps I'd need to take to install Squeeze AMD64 on a server with two quad-core Xeons? I had no issues installing Server 2003 x64 and XP Pro x64 on the box, but I seem to remember seeing something somewhere about XenServer in the kernel images.
As Xen is based on LINUX I'm hoping that someone out there could help me. I'm struggling with 802.3ad on a cisco switch (LACP). I'm going to be using this for my storage network on a dedicated cisco switch talking to a teamed pair of intel NIC's ISCSI storage. From the intel side I can set them to Link aggregated one team 2GB this is fine and my config shows active active on the NICs. How would I go about doing this from a LINUX box. In order to remove any bottle necks it needs to be active active from Xen. If I do a pif-forget uuid= on a XEN server I'm in complete control using Linux.
I'm trying to install vim-enhanced on a XenServer 5 system which is supposed to use CentOS under the hood. Being a debian user I'm not very familiar with the way packages work in CentOS. The problem is that the packages manager seems to do nothing. I assume that a repository is missing but I don't know which and how exactly to add it.
[root@icestation ~] yum install vim-enhanced Loading "installonlyn" plugin Setting up Install Process Setting up repositories
I have installed an opensuse-11.2 guest-vm under my opensuse-11.2 host-os. Now I would like to export it and import it on a Dell Bladeserver which runs citrix xenserver 5.0.0. Is this possible? How would I do that?I have the disk image of the vm and probably somewhere exists a XML description of the vm. What comes next?
I need to somehow do a yum installation (or equivalent of) on a system that is offline with no access to the internet. (I do have access to another Linux system that has internet access, but the Linux installations on both systems have different packages installed and enabled.)
Let's say the command to enter is 'yum install pkg1 pkg2 pkg3' (the documentation for some applications I need indicate the installation instructions this way, and not as the actual RPMs I need). Is there a way for me to run that on my offline system?
e.g. one way I can think of is to run that command on the online system, somehow if possible take note of what RPMs get installed, then transfer them to the offline system via USB and install all the RPMs via rpm command.
The problem with my above idea is that the two systems have different packages enabled, so even if yum on the online system shows a few dependencies being downloaded, I could run download and install all these RPMs and their dependencies on the offline system only to find several more missing dependencies, and dependencies of those dependencies.
I've got an ASUS eee1005 that I'm trying to load eeebuntu -- I've read good things about it! However, I managed to get it (partially) installed using only unetbootin and the eeebuntu-nbr iso. Luckily I've got other working laptops in the house, or I'd be stuck because now I've got a partially installed distro that isn't allowing me usage of my wireless. Basically, what I'd like to do is be able to go back to the install process and load all the packages I want, which, hopefully, will give me NetworkManager so that I can finally connect. I can boot to the thumbdrive (8gig, btw) but I don't think I've got the right files on it to do the install. Here's what appears on the thumbdrive:
[code]...
I would think that with these files on the thumbdrive, it could find its way into the install process. Apparently not. I've read most, if not all of the 'install from USB' threads and how-to's, and it's still not working right - Now, having a partially installed distro (with GUI that's not GNOME, or KDE. . ?) Are there any options I can use to pickup where the install left off and start adding packages? Or should I just scrap it and re-install?
I am trying to do a 'light' install of Ubuntu 10.04 using the alternate install CD. Here is how i am planning to do it:
1. Perform a console only installation(Standard system only on d-i tasksel) 2. Install gnome-core 3. Then install the packages i need using apt.
1. Would such an installation lead have any significant performance(RAM usage) advantage over a full fledged installation?
2. Is there a way i could install gnome-core from the installation CD instead of downloading them from the repository?
3. Would installing just gnome-core mean that synaptic & update-manager wouldn't be available? i am hoping that it wouldn't be the case I checked their dependencies from packages.ubuntu.com, it doesn't look like they need gnome-desktop-environment to be installed first.
4. Would such an install have any more device driver related issues (eg.display drivers) than a regular install?
I just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows. What can I do to fix this?
I have 40gb of hd and I want Xp and fedora on it. I installed Xp first and now I want to install Fedora 12, every time I chose the space to iinstalll it, it says that there is no enough space to install it, although the xp just took less than 2gb of the disk. How can I resize it so that there is enough space?
i'm trying to install gcc 4.3 on ubuntu 9.10 using the following: sudo apt-get install g++-4.3 CC=gcc-4.3 CXX=g++-4.3 ./install
the first line is ok, but i dont know what to do with the second. if i type both in one command, i get "E: couldn't run package CC" and if i run each separatly, i get "./install not found in the directory" objective: install ns 2.34 on ubuntu 9.10 (32-bit).
If I want to just install Linux kernel for educational objects on a fresh computer, should I first install one of Linux distribution and then update it's kernel or I can just install kernel itself?
What is the difference between install -c and cp? Most installations tend to use install -c, but from the man page it doesn't sound like it does anything different than cp (except maybe set permissions). When should I use install -c and when cp?
I'm using Linux Mint 10 Julia and currently in the UAE.I'm having trouble accessing a lot of websites so I want to install tor.However the the domain is block and so the repo address of tor itself is blocked.How can I install it otherwise or are there other links I can try?the problem is not connecting to sites like[URL]
I'm running Debian, but it seems I only have the vim-tiny package. I need the full VIM package,because I would like syntax highlighting. Here's the error I get when I try ":syntax on" command in VIM: Sorry, the command is not available in this version: syntax on Now, I've tried apt-get on the following recommended packages, but nothing seems to workvim-rt vim-full vim Here is a list of install VIM packages that I have
I'm trying to install AVG 9 free edition on pclinux 2009 but when I try to install it via the setup.exe file it asks: open with: and lists, internet,more applications,multimedia,office and system with all their sub folders! Shouldn't the file open and run automatically live in windows or do I need to install some other program to run this type of file?
I am currently running Microsoft xp and my laptop is a HP and has only got a 40gb hard drive but i am not 100% sure if i want to commit yet as i am not sure what to expect.
That then raises my question. How do i go about installing linux on my 250gb wd external HDD if it is possible?
testuser@testuser-desktop:/usr/include$ ls /usr/bin/gcc* /usr/bin/gcc /usr/bin/gcc-4.1 /usr/bin/gcc-4.4 /usr/bin/gccbug-4.1 testuser@testuser-desktop:/usr/include$ gcc -v
[code]...
i have a folder which is similar to that. but it is missing few headers which i need like dlfcn.h,dirent.h.... and all that. so, my programs instead of compililng from my gcc/include they are getting compiled from /usr/include, which i dont want. so, i want to update it. checked the net to get such portable gcc. but i couldn'fd find. ifound one link [URL] i downloaded files from the this link, because this structure is very similar structure like my "_lin"(portable gcc). but it is noe allowing to download certain files in /lib like libstdc++.so... and few other files. i thought those are compiler specific shared objects.so, i was left with no answer to my question. where to find portable gcc-4.4 ?
I am running red hat in VMWARE virtual machine. I need gcc compiler. i downloaded the gcc-4.5.2.tar.gz2 file. Can't seem to install. Here is what i tried so far
1. downloaded the gz2 file
2. placed it in /home/me
3. in terminal i cd to the folder with file in it
4. gave this command that i read here in LQ
tar xvjf gcc-4.5.2.tar.bz2
5.It extracted the files in folder gcc-4.5.2
6. cd to the extracted folder
7. gave command ./configure got this error
"make:***error: in '/home/me/gcc-4.5.2': "make:***error: no acceptable C compiler found in $PATH
8. gave command make here is where i am getting this error that "no target specified and no makefile found. Stop"
I just want to know how to install anything. I am new to linux but have followed it for a long time. I tried linux at one point in time 8 or 9 years ago but it was too difficult if there was no one around to hold my hand.I've heard that pclinuxos et al have become very user friendly, but it seems user friendly to people who already speak the language. I don't but want to continue using if I can get some functionality out of the programs.
I am looking at libre office and wine (I need ms office for a contract that I have and I do have that on my laptop, but if I can use my pc and laptop that would be great.)If someone could give the 'for dummies' version of how you install programs that have been downloaded,- in kindergarten speak, too.I have pclinuxos kde. I try to access the files in ARK but it doesn't recognize them so that must not be the first step.
I'm trying to install mc using apt-get: apt-get install mc and get the following error: Failed to fetch [URL] 404 Not Found [IP: 130.89.149.226 80] Tried /etc/apt/sources.list, fetching specific version, tried -t, tried "man apt-get"... but I cannot get through this.
