I want to update the kernel on my system (currently using 2.6.31.12-0.2-debug), and I added the kernel head repository, but online update gives me nothing. This may be a simple question, but how do I update my kernel?
View 7 RepliesA recent kernel update seems to have misplaced the Kernel Headers. VMWare needs these headers and cannot find them. Attempting to run VMWARE gets the message: Kernel headers for version 2.6.31.12-0.2-desktop were not found.
View 4 Replies View RelatedI installed the new 2.6.34.4-0.1 security update earlier today. Now, the login screen no longer responds to my keyboard. In particular, I cannot type my password to log in. If I reboot into failsafe mode, the keyboard works and I can log in.
I'm running 11.3 on a white MacBook 4,1.
I checked my kernel version (uname -r) and see I'm on "2.6.34.8-0.2-default", and I noticed that they just released 2.6.39. I'm assuming (perhaps incorrectly) that there's been at least versions 2.6.35/6/7/8 released in there. Why isn't my openSUSE 11.3 using anything more recent than .34? How does this updating work? Is 11.4 on a more recent one?
View 8 Replies View RelatedI'm using openSUSE 11.2 in my desktop pc (mb asus m4a78-em), and is the second time I deal with this problem. The first time, I simply did a format, I installed fedora and then I reinstalled opensuse (because the usb neither is detect in the installation process, in opensuse).Now, I don't want to do that again.
I just did a clean install and then I updated all packages, among them was the kernel. (Note, I SUPOSE the kernel update is the problem, but quietly can be the kde update, I don't know).The problem itself is opensuse can't detect any usb device, among then are my wireless usb kit (mouse, keyboard). Currently I only have this input device (also a usb mouse, so I can't do anything in opensuse), but I think I will have borrow a ps2 keyboard, at least.The actual kernel is 2.6.31.12-0.2. In the grub, the usb works. When the first loading screen appears, all leds are turned off.I know it is little information, but it's this I can give for now. Let me know if I should give more.
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf:
Code:
Section "Device"
BoardName "ATI Radeon HD 3200 Graphics"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "true"
Option "Capabilities" "0x00000000"
Option "OpenGLOverlay" "off"
Option "FSAAScale" "0"
Option "FSAAEnable" "off"
Option "VideoOverlay" "on"
Screen 0
VendorName "ATI"
Rolling back to kernel 2.6.27.37 fixed the problem.
After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.
1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot
2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.
After boot the system could start but modules were not loaded.
3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first.
4. The same for /usr/src/linux-2.6.31.12-0.2*
Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?
I'm trying to figure out how to update the kernel in 11.4 from the repository. I have the stable repo added, but i'm not sure how to get it updated.
View 9 Replies View RelatedWell, the gdm issue was pretty easy to solve. Just reinstalled NVIDIA video drivers in runlevel 3.
But sound seems to be a litle more dificult. Before I spend some hours, I would like to ask if some had the same problem.
By the way, here is my alsa-info.sh url.
I am experiencing the "slow internet" problem (mentioned multiple times in these forums) but it started exactly when I ran an online update, which switched my boot image from vmlinuz-2.6.31.12-0.1 to vmlinuz-2.6.31.12-0.2. Perhaps a setting somewhere got overridden? When the update occurred, grub couldn't find the OS because it had the wrong version #, and I manually edited it (via a livedisk) and that fixed it; it also switched my vga resolution in the grub conf. OpenSUSE is *acting* like ipv6 is enabled again, but ifconfig doesn't report that, and my MTU is close to 1500.
View 6 Replies View RelatedI've installed opensuse 11.3 few days ago on my laptop, and it seems after kernel update, wifi refuses to work. I'm using gnome and after the update the iwlagn module was not present in the 'ifup'. So i run modprobe iwlagn and here is the output.
View 3 Replies View RelatedI have an HPDV7 laptop running 11.2 and experienced this weeks panic when kernel updated. With help of the forum, I have recovered, but have some broader questions. First - I would like to second the motion that this post get some sort of super-sticky status - ATI Radeon driver blown away! - openSUSE Forums
Question: Is there a way to make double sure that a kernel update is desired by the user? I do not recall agreeing to an upgrade, but perhaps just was too distracted to notice that a new kernel was part of other normal updates. Given that this is a mobile laptop, I would not normally want to go thru the update process when not connected to Ethernet.
Comment: For my DV7, I run 3 packages different from the standard kernel:Video: fglrx from the ATI Repository oldcpu has that covered in the post above. Wireless: compat-wireless, which provides an ath9k driver with improved interface with NetworkManager and significantly improved 802.11N performance NIC: R8101 driver from the NIC repository, again for improved interface with NetworkManager For this latest kernel update, I had to reinstall fglrx and compat wireless. The NIC driver seems OK. Comment: I run 11.2/KDE4.3.5 with the above tweaks. It runs extremely well, particularly when compared to the stock Vista the laptop came with.
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
After upgrading kernel, system (AMD 780G)refuses to start in graphic mode. Computer services running fine, but there's nothing or some trash on screen when X started. And no way how to get out except restarting or shutting down from remote computer.
Reinstalling, unistalling ATI driver doesn't help. Also manipulations with xorg.conf (install, safe etc previous file versions)doesn't help.
Sax2 detects videocard correctly, but result is same regardless which resolution@Hz is specified.
In logfiles I just can find this
Jan 19 04:12:55 www kdm_config[4226]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 19 04:12:55 www kdm[4225]: X server died during startup
Jan 19 04:12:55 www kdm[4225]: X server for display :0 cannot be started, session disabled
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies View RelatedSince the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies View RelatedI updated the Kernel to 2.6.34.4-0.1-desktop. First problem was in order to do that I had to uninstall ndiswrapper. Now I have multiple entries in the bootloader, the default, the desktop, and the openSUSE 11.3 -2.6.34-12. Since I am new to linux what am I suppose to do with all those entries?
View 9 Replies View RelatedAfter reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback)
2. sound card driver is missing (nVidia MCP79)
3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
View 9 Replies View RelatedAfter last kernel update (2.6.31.8) when I try to connect to access-point my system freeze.
I use realtek network card (rt2860sta module).
opensuse v11.2linux 2.6.31.12-0.1-desktop x86_64The kernel symbol file is still at 2.6.31.3. Apparently the symbol file did not get updated with the rest of the kernel development files. At least one program does not build because of that
View 9 Replies View RelatedI was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
View 9 Replies View RelatedHere's what to do right after applying the latest kernel security patch (2.6.34.7-0.4) to get the ATI driver back to work. Do not reboot yet make sure the update installed the headers and sources for kernel 2.6.34.7-0.4: rpm -qa | grep 2.6.34.7-0.4 should print the files in red on a 64bit system:
[Code]....
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies View RelatedThis is just a nit, but I have noticed that whenever the kernel is updated, the background picture that I have set up for the login screen seems to be reset to "default_blue". No other setting seems to be disturbed.
After each update, I have to go into Configure Desktop->Login manager and set my background picture again. Why is this happening? Is there a way to fix this?
I am running Suse 11.3, KDE v4.4.4.
I am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
Recently I did a kernel update (compiling it manually with help of SuSE Automatic Kernel Compiler). Everything works fine and I am happy with my own settings, however there is one thing that I would to enable. On the stock kernel there is a openSUSE bootsplash on startup and a nice looking openSUSE background image in console mode. On my newly compiled kernel there is no such a eyecandies. My question is: How to enable them on my own compiled 2.6.38 kernel?
P.S In the attachment you can see what i mean with that background image in console mode, so you get my point. This is the image found on the internet, my system is openSUSE 11.4 (64 bit)
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...