OpenSUSE Hardware :: Run And Utilize AMD Up Coming Llano APUs?
May 25, 2011I was wondering if anyone has any suggestions on some of the software packages one would need to comfortably run and utilize AMD up coming Llano APUs.
View 2 Replies
ADVERTISEMENT
OpenSUSE :: Get Application To Utilize More Than One Core In Multi-core Setup?
Mar 27, 2011I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
Ubuntu Multimedia :: Displays Sound Is Coming Out When Play A Song But No Sound Is Actually Coming Out
Mar 24, 2011i have uninstalled and reinstalled alsa and made sure its not muted, in pulse audio it displays sound is coming out when i play a song, but no sound is actually coming out.. i dont want to go back to windows, but if i cant get sound im going to have to
View 1 Replies View RelatedOpenSUSE :: No Sound Coming Through NX Session
Mar 31, 2010I did enable multimedia support in the NX client configuration services tab but no sound coming through NX session.configure desktop / multimedia / I have Output Device Preference.My sound card is listed and below that is Pulse Audio.From reading up on NX I think Pulse Audio has to be the preferred output device but gives error that it does not work and rolls back to sound card it if it is set to preferred.I for got how I got it to come up last week but it was an error that pulse audio was not even installed.
View 4 Replies View RelatedOpenSUSE Hardware :: X Window Is Not Coming ?
Mar 7, 2010I have a benq joybook r46. and it has a "intel gma x4500hd" graphics card.when installing open suse11.1 its giving a message that there is some problem with my graphics card,,, & after installation only shell is available.
How can i get an x window out of my current configuration?
What version of suse will suit me best?
My computers configuration as follows:
Intel Pentium dual-core processor T3400
ChipsetIntel GL40 Express Chipset
GraphicsIntel GMA X4500HD
MemoryDDRII-667 1GB
Drive160 GB (5400RPM - SATA)
OpenSUSE Install :: When Official Drivers For NVIDIA Cards Are Coming Out?
Jul 15, 2010Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
OpenSUSE Multimedia :: Audio Coming From Both Headphone And Laptop Speakers
Dec 1, 2009All of my audio is working great now on Open Suse 11.2: MP3s, Skype,Flashplayer etc.all are working great. There is only one strange thing that is happening, when I plug in my headphones I get audio coming out of my laptop and my headphones! How can I get my audio to come out of my headphones only when I plug them in?
View 10 Replies View RelatedOpenSUSE Multimedia :: Sound Is Not Coming From Laptop Speakers And Headphones
Apr 24, 2010I might have a different problems as I have a newer laptop, a HP dv6-2170us with intel i5 cpu. I had no wireless with the 2.6.31 kernel so I upgraded to the 2.6.34 and had to manually compile my wireless driver. Everything works great now except the sound issue. I thought it use to work out the box with the old kernel, but then again I might be wrong. I knwo it works in the "other os" dual booting and all. Its a not a huge issue, but hopeing I could resolve it. Here is some of the info from reading some of the other posts. the model=dell-vostro I just tried to see if that works, which is doesnt, so thats why thats in my sound.conf file.
[Code].....
Have I missed anything? I have tried the fix here: Audio coming from both headphone and laptop speakers - Page 3 - openSUSE Forums page 3 about adding a repo and upgrading, but that upgrade wants me to revert back to the older kernel in which case I dont have wireless support or acpi working proporly, so thats not a doable thing for me.
OpenSUSE Multimedia :: When Watch Film On TV By Using HDMI,Sound Is Coming From Pc Not TV?
Sep 19, 2010OS Information
OS: Linux 2.6.34-12-desktop i686
Current user: vastolorde@linux-9eds.site
[code]...
OpenSUSE Hardware :: 11.4 Dual Monitors - Left Monitor Not Coming Out Of Powersave?
Sep 7, 2011I have a really strange X (?) problem. My physical setup is:
Dell Optiplex 990
VisionTek 210 nV DMS59 PCIe video card (with a DVI splitter)
dual Dell P2411H monitors
I'm running OpenSuSE 11.4 (x86_64 fully patched) with the current nvidia drivers and kernel module. I'm running KDE and kdm in case that matters.
If I power off the two monitors, and then power them on again, the right monitor will come back on. The left monitor (which is the primary one... it's the one where the login screen appears when you are first logging in) reports that it is in power save mode. Wiggling the mouse, typing, etc., do not wake it up. The only thing that wakes it up is the detach the DVI cable from the monitor and reattach it (and sometimes it takes a couple tries).
I have used two (identical) video cards and splitters, and the problem occurred with both, so the problem doesn't appear to be with either of them. I also swapped monitors, but after the swap, the problem still occurred on the left monitor, and the old left monitor (which was now right) came on fine, so it doesn't appear to be a monitor problem.
I'm baffled. For now, I just won't turn off the monitors (or at least not the left monitor).
Ubuntu :: X86 To Utilize 8gb Of Ram?
Jul 14, 2011I know in Windows that if you install the x86 version, it can't utilize more than four gigabytes of ram, is that true for Ubuntu/Linux? I have 8GB of ram and I want to make sure it is all utilized. Linux Ubuntu-Aphex 2.6.35-30-generic-pae #54-Ubuntu SMP Tue Jun 7 20:28:33 UTC 2011 i686 GNU/Linux
View 3 Replies View RelatedNetworking :: Utilize 2 Connections At Once?
Sep 13, 2010there is a cable connection and a wireless connection. Is it possible that I use the cable and the wireless to run a segmented download on both connections? Like half goes to wireless and the other half goes to the cable? Or if not the segmented download, then at least I surf the Internet with one and download on the other?
View 1 Replies View RelatedNetworking :: How To Utilize Multiple Ext. Ip
Jan 10, 2010i have 3 external IPs, assigned on eth0, eth0:1 and eth0:2.I have a game bot that connects to a game network, but the game network only accepts a limit of 5 connection from same ip. The game network has multiple IP addresses. (e.g. game.com resolves to 1.1.1.1, 1.1.1.2, 1.1.1.3 etc)How do i specify that certain bot connects via eth0:1 and eth0:2? Currently all bots are using eth0's ip
View 14 Replies View RelatedGeneral :: How To Utilize Inotify Command Properly
Jan 21, 2010I am using inotify-tools in order to achive my task. inotify-tools has two commands inotifywait or inotifywatch. I am using inotifywait. I want to be able to extract unique paths that inotifywait will output and then take those unique file path run them through clamscan and quarantine the files if necessary. Here's what I have come up with so far.
View 6 Replies View RelatedFedora :: Utilize The Screen Edges (Namely The Left And Right) In Fluxbox
Jul 16, 2010Is there a way to utilize the screen edges (Namely the left and right) in Fluxbox. I've looked around but I couldn't find a way. I mainly want to switch the workspace when the mouse encounters the screen edge.
View 6 Replies View RelatedGeneral :: Create Tunnel To Utilize For Telnet Connection?
Nov 8, 2010Machine A is located behind client firewall. The machine runs telnetd. This is Linux machine with Python 2.5.4 installed. I do not know the IP addy of the router and firewall is not open incoming. outgoing firewall is open.
Machine B (Windows machine) is a server with well known IP address. I can install any programs I want on either machine.
The idea is that I want Machine A to open a socket to machine B. Then I want to hold that socket and use to run a telnet session from Machine B to Machine A telnetd server.
Ubuntu Networking :: Utilize Airmon-ng But Cannot Detect My Wlan
May 16, 2011I'm new to Ubuntu. I'm trying to utilize airmon-ng but I can not detect my wlan. I can access the web.
gianmario@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI b
[Code].....
Ubuntu Installation :: How To Utilize Maximum Space Of 16gb USB
Jun 13, 2011I have a transcend pendrive USB of 16 GB . I installed Linux ubuntu and i am able to allot only 4gb for working with linux ubuntu. I want to utilize my maximum space of 16gb USB.Can i alot more disk space for Linux in my USb ?
View 5 Replies View RelatedSoftware :: BitToClients Utilize Bandwidth For Faster Downloading?
Feb 26, 2010The three I have narrowed it down to are Deluge, BitTornado or Azureus/Vuze (are they different clients??). What I really need to know is which one will allow me greatest control of my torrents, and which one will utitlise bandwidth best for faster downloading. It is important, as I tend to download LARGE torrents (currently have one which is over 200GB in size), but they usually aren't smaller than about 4GB. How much system resources they use are not a major issue, though obviously lighter is preferrable. I just need the speed and control.
View 4 Replies View RelatedUbuntu Multimedia :: How To Configure 'Transmission' Client To Utilize Connection
Jan 9, 2010I have Ubuntu installed, using transmission client to download a torrent.The torrent is coming down at ~300kbps, but my internet connection speedtests @ 50mbps...how do I configure connection to utilize connection?
View 4 Replies View RelatedUbuntu Networking :: 9.10 / Broadcom - Utilize The Patches That Would Allow Packet Injection
Jan 30, 2010I was playing around with Aircrack the other night, and trying to utilise the patches that would allow packet injection, but it wasn't working for me, so I rebooted. After that, though, my wireless card seems to have gone completely haywire. It doesn't show up at all in iwconfig. Before, I had 4 entries: lo, eth0, irda0, and eth1, which was the wireless. Now, only the first three show up. This is what it comes up as under lspci:
Code: 04:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) I've tried a number of solutions I've found online, including doing a cold boot, reinstalling the driver (Broadcom STA) and starting up from a cold boot, and am now trying this approach. Nothing has worked, so far. I'm getting really desperate. I need my wireless working for university, which starts shortly, and I might even switch back to Windoze if there's no feasible solution.
Ubuntu :: Faster Download Speed - Utilize Internet Connection Better?
Jun 24, 2011So I switch between Ubuntu and Windows alot, because some games I can only get to run smoothly in the windows environment. Anyways, one thing I have been noticing ever since I got Ubuntu but never really questioned, was about my download speeds. When downloading a torrent in Windows, I topped out out about 2.0 mb/s. Where as in my Ubuntu install, running the same torrent program (utorrent) and downloading the same file, I was getting 3.0 mb/s. I was wondering, what is it about Ubuntu that is utilizing my internet connection better? Only a hand ful of times have I ever reached 3.0 in my windows install (such as right now while I am downloading a game through steam).
View 3 Replies View RelatedGeneral :: Move And Utilize Root /boot And Swap Dir To Temporary Location?
Oct 16, 2009I'll start by explaining what my system layout currently is. I have Fedora 11 X64 installed on my system, it is an HP Dv9380ca laptop. My system has 2 hdd /dev/sda /dev/sdb. During the setup i set my home directory to reside on /dev/sdb. After booting i realized that my root and swap partition are part of a volume group name vg_sharpfed and are set in fstab as:
/dev/mapper/vg_sharpyfed-lv_root / ext4 defaults 1 1
/dev/mapper/vg_sharpyfed-lv_swap swap swap defaults 0 0
Output of Fdisk -l /dev/sda
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1aecda8d
[code]....
My /dev/sda2 partitions is 100gigs and set as an LVM. Essentially what i am getting at is, if it's possible to temporarily copy / /boot and swap to my second partition, edit grub if needed and fstab to mount to the temp locations, format sda to ext4 create partitions for / /boot and swap partitions, then copy back the original directories edit required fstab to mount the original locations and no longer have them contained in a Logical volume.
CentOS 5 Server :: How To Utilize Access Map And Relay-domains To Achieve Same Thing?
Feb 3, 2010I run a few sendmail servers that run MailScanner/Spamassassin/sendmail (current versions) on Centos 5.4 and Centos 4.8 These boxes accept mail for a large number of domains (6000+) scan the mail removing spam and then forward the ham to another server for delivery. I am attempting to stop any backscatter that these servers cause by only accepting mail for specific users@domain or for domains with a catch-all account.I currently use /etc/ mail/ access.db as the access map for the domains, but this allows all mail to be accepted for the domain before the attempting to send it on for final delivery which causes NDR and backscatter for those domains which do not have a catch-all account.
I have looked at adding "To:user@domain RELAY" to the access mapand also adding "define(`_RELAY_FULL_ADDR_', `1') " in the sendmail.mc and running make -C /etc/mail but this has no effect on the sendmail.cf file. My understanding is that if I can get sendmail to accept this undocumented feature then all will be fine as I will be able to use the access map to allow mail to those specific users as well as entries of the type "domain RELAY".My second question is: Does anyone have any ideas on how to utilise access map and relay-domains to achieve the same thing?
OpenSUSE Hardware :: Both Monitor Displays Coming Through On Single Monitor?
Jan 21, 2011I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies View RelatedSoftware :: Get Ubuntu To Utilize OpenGl Support For Nvidia 8800 GTS Video Card
Feb 21, 2009I have downloaded latest Nvidia drivers but am not having much luck getting .run to install properly. How do I go about this?
View 2 Replies View RelatedFedora :: User Memory Allocation - Set A Maximum Limit On The Amount Of Ram A User Can Utilize?
Jul 24, 2009I have a few multi-user servers in an academic laboratory. I am having a problem with some users maxing out the available RAM, causing such sever slowdowns the machine essentially crashes. My servers are Dell Power Edge's running Ubuntu 8.10 Server Edition (Not my choice). I would like to set a maximum limit on the amount of ram a user can utilize. This morning I experimented with setting limits via /etc/security/limits.conf and using ulimit. Neither of them prevented my test program, a simple infinite loop of mallocs, from crashing the server.
View 7 Replies View RelatedFedora :: Kernel 3.0 Coming To F15?
Jul 29, 2011In the form of 2.6.40, it's in koji. Should be in updates-testing soon.
View 5 Replies View RelatedUbuntu :: Can I Tell Which Ppa Package Is Coming From?
Jan 30, 2010from my thread here:URL...It looks like i'm getting libglib from one of the PPA's I've added. How can i tell which PPA its coming from and get it from official instead?
View 2 Replies View RelatedFedora :: After Installing VLC - Audio Coming Only From VLC
Jul 10, 2011I have a fedora 13, and I am not so much a linux person . I installed VLC in my system using yum, and ever since that I get audio playback only using VLC. Audio through browsers, or other players do not work anymore.
View 1 Replies View Related