I bought a new printer today (HP Photosmart), and Yast did find it in my wi-fi network and configured it properly.I see that Yast set the connection type to "socket://192.168.1.7", which is the IP the printer had. But the IP is given by the router (DHCP).Is there a way I can change the printer configuration so that the printer will always be available whatever its IP is (can be from 192.168.1.5 to 192.168.1.8) ?
View 4 RepliesI want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies View RelatedI am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
I have a box with 1 ethernet card and Huawei E160 USB modem. So, I have configured eth0 interface with IP 192.168.1.1 and modem0 interface with dynamically assigned IP. Now, I'd like to share Internet from modem0 to eth0 and so to the rest of home local network.
I need your advice on how to do it. All the manuals I've read deal with two ethernet cards that have static IPs. It seems that YAST lacks the GUI for it, too. Also, I need the configuration to work even with no user logged in so I'm using ifup instead of NetworkManager.
I have comcast xfinity high speed dsl, with a dual boot win2000/opensuse 10.3 system. I'm connected in win2000, but I can't quite figure out how to configure comcast's dynamic ip address' in opensuse 10.3, either on command line, or in KDE with YAST (scream on the latter attempt).
I've looked up all man pages on ip cpnfig, but the problem is that my last internet connection was through a router with a static ip address, and I can't quite figure out the shell command from man pages ( I've tried dozens of combos like ip addr [change] {dynamic|on} etc. from what I could gather from man page instructions, but I can't seem to get the dev object and options worded just right), and I'm about ready to throw my monitor at the wall during every YAST attempt (and of course YAST doesn't pick up my dsl automatically and why it's asking for a comcast userid upon manual entry I haven't the slightest).
Anyone using dual monitors (dual head) and has a nvidia graphic card, might be interested in the app, Disper, nvnews.
You can configure a dual monitor, on/off, via nvidia-settings, but you can automate it with Disper by writing a script to execute something like:
few days ago i installed the newest opensuse 11.4 32bit system and all is working really fine.except when starting apache or doing a php -v on the CLI i receive the following error ->
php -v
PHP Warning: PHP Startup: Unable to load dynamic library
'/usr/lib/php5/extensions/intl.so' - /usr/lib/php5/extensions/intl.so:
undefined symbol: grapheme_extract_count_iter in Unknown on line 0
i know this bug has been reported earlier and i found quite a few results in google.i even found one result where the problem was fixed and updated in an additional opensuse repository -> Additional package repositories - openSUSE the repository with the fix is the following -> Index of /repositories/server:/php/openSUSE_11.4 so ... i added this repository via YAST to the repositories in my system without any problems but whenever i do a system update via YAST i don't receive new fixes and patches from the newly added repository!
if i directly browse to the /i586 folder in the repository i see all the PHP updates with version 5.3.7 and the latest updates were done 19 aug 2011 Index of /repositories/server:/php/openSUSE_11.4/i586 but my system still has PHP version 5.3.5 installed and somehow doesn't want to update from the newly added repository for the apache php modules so ... i just double checked and the repository is enabled in YAST ... but I still don't receive updates from there i would like to update to the new apache php modules, to get rid of that php '/usr/lib/php5/extensions/intl.so' warning, but somehow that doesn't seem to work
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies View RelatedI'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
View 4 Replies View RelatedHaving made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I have installed the drivers HPLIP but I cant use the all in one HP printer, tried setting up the device in the HP tool box but it says I have to add user to lp group so I tried adding a lp user but I must haven't done it correctly as it still no work, so how do I add the lp user? I don't want to use cups printing.
View 1 Replies View RelatedUbuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedI am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedI have an HP Designjet z3200ps but I cannot find a linux driver for it. What should I do now ?
And I'm also wondering if the linux driver for etc device is not developed, what should the Linux gurus do ?
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
I have just installed openSUSE 11.4 after having been using Ubuntu on my desktop for nearly three years. Most of the installation process has been quite straightforward, but I seem to have a (somewhat surprising) problem getting my printer to work. YaST finds is able to detect it, but it does not accept the driver I have downloaded at the manufacturer's website.it's an OKI B430d and it was advertised being particular suitable for linux, since a linux driver was available.
View 1 Replies View RelatedSuse 11.4 64bit
amd6000
gigabyte motherboard
4 GB
HP psc 1200 series printer
I try to print a page and nothing happens(after 10 mins+). The HP tray icon->printer control says it's pending. Also, I have the hardware system info file.
I want to set up my network printer with opensuse 11.2
Here are the details of the printer
What do I need to configure to use this printer with the above information?
I have a copy of OpenSuSE which works fine, but like previous older versions of Linux it is difficult to setup the printer which is a HP 2605dn color laserjet. Once, I was able to get it setup using the CUPS software online, but was only able to print out a test copy and after that I was where I was before the setup.
This problem also happened on a Netbook computer which came with Ubuntu on it. The OS was able to pick up the network printer the first time too. On OpenSuSE it does not pick it up automaticly and and it seems to be difficult to setup using the built in software, or the cups system.
I have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies View RelatedI have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.
Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.
I notice sometimes if the page has graphics it either is very slow to print or wont print.Will adding memory help? I was thinking of a 64mb module.
View 5 Replies View RelatedI'm setting up a netbook for somebody (in another country!) and one of the last hurdles is the printer setup. I only have the netbook and not the printer with me. I know that the printer is a HP PSC 1215 All-In-One Printer but there seems to be a Catch-22 that I need to have the printer connected in order to be able to set this up using the GUI tools. How do I work around this? As a minimum I just want to enable printing, although scanning would be a bonus.
View 1 Replies View RelatedEverytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies View Related