OpenSUSE :: PHP Startup: Unable To Load Dynamic Library '/usr/lib/php5/extensions/intl.so'
Aug 20, 2011
few days ago i installed the newest opensuse 11.4 32bit system and all is working really fine.except when starting apache or doing a php -v on the CLI i receive the following error ->
php -v
PHP Warning: PHP Startup: Unable to load dynamic library
'/usr/lib/php5/extensions/intl.so' - /usr/lib/php5/extensions/intl.so:
undefined symbol: grapheme_extract_count_iter in Unknown on line 0
i know this bug has been reported earlier and i found quite a few results in google.i even found one result where the problem was fixed and updated in an additional opensuse repository -> Additional package repositories - openSUSE the repository with the fix is the following -> Index of /repositories/server:/php/openSUSE_11.4 so ... i added this repository via YAST to the repositories in my system without any problems but whenever i do a system update via YAST i don't receive new fixes and patches from the newly added repository!
if i directly browse to the /i586 folder in the repository i see all the PHP updates with version 5.3.7 and the latest updates were done 19 aug 2011 Index of /repositories/server:/php/openSUSE_11.4/i586 but my system still has PHP version 5.3.5 installed and somehow doesn't want to update from the newly added repository for the apache php modules so ... i just double checked and the repository is enabled in YAST ... but I still don't receive updates from there i would like to update to the new apache php modules, to get rid of that php '/usr/lib/php5/extensions/intl.so' warning, but somehow that doesn't seem to work
I keep getting mails with this warning on my 11.04 server
Code: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/mysql.so' - /usr/lib/php5/20090626/mysql.so: cannot open shared object file: No such file or directory in Unknown on line 0
apparently everything is working as it should and I don't know how to get rid of this warning
I recently upgraded to php 5.2 using the testing repository. All went well except for one extension.
root@clibweb2 ~]# php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules//usr/lib64/php/modules/http.so' - /usr/lib64/php/modules//usr/lib64/php/modules/http.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP 5.2.10 (cli) (built: Nov 13 2009 11:44:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies [root@clibweb2 ~]#
I tried: [root@clibweb2 ~]# ln -s /usr/lib64/php /usr/lib/php Adding the complete path to php.ini And using PECL I still get the error. Output of getinfo.sh (general) is at [URL] The Package specific is at [URL]
On a number of sites I use PHP's snmpget() function, but now on all these I just get this error: PHP Warning: PHP Startup: Unable to load dynamic library '/etc/php.d/snmp.so' - libnetsnmp.so.15: cannot open shared object file: No such file or directory in Unknown on line 0 PHP Fatal error: Call to undefined function snmpget()
I have installed oci8 from the remi repo and can not get it to work.I have been trying all day but still end up with the same error in my apache error log when I start httpd.If anyone can suggest something more I can try or where I should look next that would be nice.In the mean time I am going to build a VM and try from a fresh install and see what happens.
fedora 12 with php 5.3.1 + apache is installed on the server
I needed a FFMPEG + MENCODER + FFMPEG-PHP setup , so I have installed all of the necessary libraries/codecs along with ffmpeg , mencoder and ffmpeg-php
I've added ffmpeg-php (ffmpeg.so) module to php.ini and restarted httpd
But ffmpeg was not showing up in phpinfo() so I grepped : php -i | grep ffmpeg for some clues and got this warning PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - /usr/lib/php/modules/ffmpeg.so: undefined symbol: php_gd_gdImageSetPixel in Unknown on line 0
That error explains why ffmpeg is not loading
Obviously something to do with GD library , so I've researched on the net , and found that some users suggest loading the GD module before FFMPEG module.
I gave it a try and added this at the end of php.ini: Code: [gd] ;loading gd extension=gd.so [ffmpeg] ;loading ffmpeg extension=ffmpeg.so ...but still same error when greping phpinfo()
After upgrading my server from 10.04 to 10.10 I keep getting the following php error, "PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/syck.so' - /usr/lib/php5/20090626+lfs/syck.so: cannot open shared object file: No such file or directory in Unknown on line 0"
I have a problem with keyboard layout and only happens with KDE applications. If I type at Firefox or Eclipse everything works fine. I already tried few stuffs like this How to enable Keyboard Layout on OpenSuSE 11.4 (Updated) but no luck so far. When I type ' + c in KDE applications I got:
ć
I was hoping ç
At Yast2 I tried: Portuguese (Brazil -- US accents) and others. Unfortunately I didnt found anything close to US - intl, US with deadkeys, etc
How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
Today I did the Seamonkey 2.1 update. I found out that some of the add-ons or extensions did not work. They were disabled, due to incompatible versions. I found out a simple solution. I hope this helps some. This helped me with the Webdeveloper, fxif and Novell Moonlight extensions. In the file install.rdf is an element called MaxVersion. Change this to 2.1.* and the extensions work again.
The file install.rdf is to be found in ~/.mozilla/seamonkey/user-thingies.default/extensions/{extensioncode}
I am trying to use a shared bzip2 library in a program I'm writing. For the life of me I can't figure out the correct gcc switch to link it in. I've tried pkg-config, but i don't know the name of the .pc file. Is there any rule for these things?
Why the thread stack size can not be changed after calling pthread_attr_setstacksize & pthread_create in a dynamic library? Detail: I write a file thread_factory.c and plan to build it and produce a dynamic library (libthread_factory.so) In the thread_factory.c , there is a routine
[Code]....
And after this, there is application, it will call fct_thread_create(STACK_SIZE_256KB), and then call pthread_attr_getstacksize(), but the stack size return always be a fixed value 0xa01000. (I tried this on Fedora12) But if I build the application source code with the file thread_factory.c directly, the stack size return is right as my expect. I checked the source code of glibc about the routine pthread_create() as below:
i cant load PNG image extensions..i dont know what to do.when i pressed the button printscreen of my keyboard the system shows me an error dialog:"Unable to save screenshot to disk:The type 'png' is not suported."what is the problem??i try to rebuild libpng and libjpeg, but i cant solve the problem.
I just installed Opensuse 11.2, and have come across the following error upon bootup: the display manager screen refuses to load, unless I type STARTX at the cli line. the error messages read: failed services in runlevel 5 /etc/init.d/xdm.orig start returned 6 earlyxdm postfix Further, I am unable to activate the xdm service under Yast. Has anyone else run across this error? Not sure how to resolve.
* An error occurred during your last KDE upgrade leaving an orphaned control module
* You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager. And then when I click OK, it closes, and that's it. how to prevent this, so I can access the multimedia settings and change them. The reason I want to see the settings, is because Amarok 2.3 won't play any songs (even though version 1.4 still works).
I'm folding and I need it to only run on 6 cores instead of 8, and I have it set to do that but Ubuntu decides to bounce the load around the 2 extra cores as well, hurting my performance. Is there a way to disable it or set it to work only on 6 specific cores?
I have a directory of a load of files without extensions. I know what the filetype should be, so is there any way of batch renaming the files to append a given extension onto it. i.e. text would be renamed as text.txt?
I have visited these boards a few times, but never posted. Here's my problem: I was given the source to a program and asked to get it running on a 64-bit Debian 2.6.26 machine. Currently it is working on 2 64-bit OpenSUSE machines.
The application uses TCL TK for a GUI and everything compiles just fine; however, on startup, the user must enter one of three possible modules to load; when attempting to load these modules (tcl 'load' function), I receive this error:
Code: Error in startup script: couldn't load file "../Build/libMpf.so": libTransReaders.so: cannot open shared object file: No such file or directory while executing "load ../Build/libMpf.so Mpf" ("eval" body line 1) invoked from within "eval load ../Build/${px}${i}${sx} $i"
When I startup Rhythmbox music player I have no library. Whats strange is when I click edit/preferences/music and then browse to select my library location (which is already correct), apon selecting the hard drive that my library is on the whole music library suddenly loads and I don't have to re-select my library folder, I just cancel the preferences window. But if I just wait for Rhythmbox to load the library without beginning to remind it where it is, it never loads.
I'd like to use PHP5.2x instead of PHP5.3x on my Ubuntu 10.04. There is a small bug in Drupal where tweaking Views causes an error which seems to be associated with php5.3.
Yet another problem I have. Suse is taking a while to learn but I swear I'm getting there. Can pritty much do everything by CLI now. I'm trying to run VMware Workstation 6.5 on OpenSuse 11.2, Gnome. I had it running fine but then needed to do a system re-install and upon installation this time I get a error saying it's is Unable To Build Kernel Module and reffers me to a error log. The error log says:
Code: Mar 14 22:07:51.420: app| Log for VMware Workstation pid=6136 version=6.5.0 build=build-118166 option=Release
I am running Suse 11.3 with two monitors and two video controllers -- an ATI controller on the motherboard and a separate PCI ATI board. After some startup problems, I got the onboard video working properly with the "nomodeset" command on boot, but the other display is blank. Thinking it might be the driver, I downloaded the fglrx driver (via YAST2). But now when the system boots it never opens X windows. I looked at the Xorg.0.log file and I'm getting a bunch of WW errors and then a seg fault.
The file /usr/share/doc/packages/fglrx/installer.html says I can uninstall the driver using the fglrx-uninstall.sh script, but I can't find such a script. How do I disable (uninstall, remove, get rid of) the fglrx driver and get back to where I was? I'm dead in the water if I can't get X going.
I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
