OpenSUSE Hardware :: USB Suddenly Stop Detecting Memorystick Being Plugged In - Error About Accessing HAL
Oct 29, 2010
suddenly it stop detecting a memorystick being plugged in. I connect but nothing happens. At this time i can plug in any memorystick and it want detect it. Then i need to reboot to get it to work and then after avail it stop working again. I also have problems with unmounting (Safely remove device) in the GUI-tool. It works in terminal with "umount". In Dolphin i get error about problem accessing HAL or something like that. This problem is resisting even after reboot. Is there a bug?
View 1 Replies
ADVERTISEMENT
Oct 2, 2010
Using Gnome and openSUSE 11.2 . Ok. I changed few keyboards to see if that is a hardware problem . Obviously its not. Whatever keyboard layout I choose .. same story repeats : USA , SRB, GER... I tried to change "key to chooose 3rd level option" in keyboard preferences: right alt, right win , left alt , left win ... but nothing works .
View 1 Replies
View Related
May 11, 2010
when starting my Latitude D830 from suspend to ram it was suddenly missing touchpad and trackpoint support. I restartet and updated but still, both devices aren't even listed in yast anymore. Keyboard and bluetooth mouse work fine, though.
Running synclient TouchpadOff=0 says Couldn't find synaptics properties. No synaptics driver loaded?. Now, i googled a bit and all i could find was some tinkering with the xorg.conf, what is especially ugly, since suse doesn't normally use one anymore. Plus, xorg.conf gives me flashbacks of allnighters trying to fix me system again
View 1 Replies
View Related
Dec 5, 2010
I am using fedora 14 64 bit, using Dell latitude E6410 suddenly my wireless stop to work, in other laptops it is working. I hooked up the internet (non wireless) to my laptop and then he sign. i restart my laptop few times, how to diagnosis the problem..
View 5 Replies
View Related
Oct 25, 2010
Yesterday I turn off my computer without problems, and today my KDE 4.5 desktop just don't wanna load. It show this error:Floating point exception
Full error:
[Code]...
View 2 Replies
View Related
Dec 7, 2010
I got error with my second HDD. Error called this: An error occurred while accessing 'Antras HDD', the system responded: org.feedesktop.Hal.Device.PermissionDeniedByPolicy: org.feedesktop.hal.storage.mount-fixed auth_admin_keep_always <--(action, result)
View 5 Replies
View Related
Jul 1, 2010
I have tried 504 i386 and 505 i386 both downloaded on an Athlon on an Abit board 20Bb hd old Hitachi monitor both load, but do not complete the boot up they suddenly stop and the monitor goes off only the setup is ever displayed the hardware is working, i just had another system on it.
View 5 Replies
View Related
Mar 5, 2011
I've been using Ubuntu 10.x for several months without any major problems. Everything was fine until this week.
In the past few days there's been a strange new problem. When I turn my computer on, it works fine for 10 minutes, and then the hard drive suddenly starts spinning and won't stop. While this happens the computer is virtually unusable. Mouse moves slow and jerky; apps don't respond; and eventually the windows close by themselves, the whole screen goes blank, and the system reboots. The whole process takes a long time, sometimes 30 minutes.
The only change I made just before this problem started was upgrading Firefox Beta 4 version 10 to the latest version 11. So, I deleted it, and went back to the latest stable version 3.6.x. That seemed to fix the problem for a day or so. But then it started happening again. I deleted all signs of Firefox; it still happens. So it's not a browser issue.
I am stumped. Today I started my computer and just let it sit there without opening any programs at all except the system monitor. It ran fine for the usual 10-15 minutes, nothing changed out of the ordinary in terms of computer resources used in the system monitor, and then suddenly the drive started spinning wildly again .....
Right now my computer's been on for 10 minutes and I am typing this message .... but who knows what will happen right now.
View 1 Replies
View Related
Nov 18, 2010
I'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
View 3 Replies
View Related
May 25, 2011
I installed F14 and I have been having some issues with the usage of the ram memory. Here is the situation: while working with firefox, amsn, and VLC, suddenly the system stop responding, I just can manage to check system monitor and the ram is at 89% (of 1GB) and the swap at 50% (of 1.4GB). I can do nothing then I just switch off the machine. After that using the same applications everything is fine. I was using F12.
View 3 Replies
View Related
May 20, 2010
how do i stop a chosen app from accessing the internet ??
View 8 Replies
View Related
Jan 2, 2011
I have a strange problem where my machine will suddenly stop responding to connections while still remaining partially connectible. Here's an example sequence of events I have taken (numerous times). If anyone can spot something else I should check or has seen these symptoms before please let me know.1) System is using an Edimax 7318-usg, Ubuntu 10.042) Wifi connection is working, with power management turned off (iwconfig)3) Signal strength does not cause the connection to drop (confirmed with router logs)4) When in a ssh session on the problem machine suddenly the ssh session is dropped "host is down"5) When I attempt to re-initiate ssh it fails, no route to host...6) Pinging it fails, accessing a webpage hosted on it fails, all access fails7) The machine I'm pinging/sshing from still has a good network connection8 ) I check my routers DHCP leases, problem machine still has a valid lease.
9) Router still shows problem machine in routing & arp table & shows active traffic going to and from (I checked the routers states and bandwidth monitor for this)10) I try sshing and pinging the problem machine from the laptop on the local network, it still fails, no route to host, wtf?11) I go to the problem machine physically, wifi connection is up with decent signal12) ifconfig indicates it still holds an IP address13) I open a browser on the problem machine, any webpage loads fine14) I ping the laptop from the problem machine, ok15) I ssh from the problem machine to my laptop, it works16) At this point I ssh from the laptop to the problem machine, sometimes it works sometimes it fails(it seems that pinging/sshing the laptop FROM the problem machine sometimes makes it connectable again).
17) Usually if I wait a while the problem machine will randomly become connectable again at random intervals18 ) The only reliable way to make the problem machine connectable again is manually reconnecting it to the wireless network19) I tailed auth.log ufw.log, etc. nothing suspicious disallowing my ssh connection20) dmesg shows nothing unusual, as far as I can tell, just some activity negotiating WPA keys and suchBy looking at the timestamp for the WPA negotiation and cross referencing the router bandwidth monitor I can tell the WPAnegotiation doesn't make it drop the conectionSo that's it, lol.
View 6 Replies
View Related
Jul 11, 2009
Well, the title pretty much sums it up. Whenever i plug in my external speakers, my laptop speakers continue to put out sound, which is good until i turn up the volume and hear rattling.
I am running ubuntu 9.04 64-bit 2.6.28-13 on an MSi GX620.
View 1 Replies
View Related
Jan 25, 2010
If I enable Wi-Fi on my laptop and use a public Wi-Fi hotspot at an airport, will a firewall such as UFW be enough to stop hackers accessing my personal files which are NOT transmitted over the Wi-Fi connection?
View 9 Replies
View Related
Mar 17, 2011
I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
View 3 Replies
View Related
Jan 4, 2010
I am connecting servers using NFS4 the shared directories are on servers running Debian 4 while the one who read from them is Debian 5.0.3. The problem is one of these shared servers suddenly stop responding and you cannot list it from Debian 5 server, also df hang, and the web application that is using it does not respond to requests that use this shared directory since it is blocked. Then the load on the server start to increase until the server cannot respond (over 90). I have found many entries in the syslog that refer to this like:
ma25555 kernel: [1200285.732919] nfs: server 10.xxx.xxx.xxx not responding, still trying
Dec 31 08:16:33 ma25555 kernel: [1200289.815378] INFO: task java:9702 blocked for more than 120 seconds.
Dec 31 08:16:33 ma25555 kernel: [1200289.835249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
code....
I have tried the connection between the 2 servers using ping for one day and all are OK (zero lost)
There are 3 other servers that are running Debian 4 and are working fine.
View 1 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Jun 19, 2010
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
View 3 Replies
View Related
Apr 27, 2011
There are so many system information tools i figure that this one would be in the set. I just can't seen to find it.
View 9 Replies
View Related
Nov 20, 2009
This sounds strange, but my laptop (running 11.2) won't boot correctly unless my external HDD (ext3) is on and plugged in. If I don't turn it on, it hangs at the start of udev. If I press ctrl+c, the system continues to boot, but the keyboard and mouse don't activate... don't function, etc. But I can press my power button and it does shut down. Going through dmesg (during a successful boot with the external HDD on), I saw this (not sure if it is relevant):
Code:
[2.201029] scsi 2:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4
[2.201450] usb-storage: device scan complete
[2.206637] sd 2:0:0:0: [sdb] Spinning up disk......
[6.062434] udev: starting version 146
[6.225262] .
The device sdb1 is the HDD.
Now, I don't know much about udev. I can tell you that I have no sdb1 lines in /etc/fstab, and I have no autofs references to it.
View 8 Replies
View Related
Apr 3, 2011
I was building LFS on a pendrive this morning when it crashed in the middle of making gcc. I rebooted without my pendrive and I never got into the desktop. Instead, I get a visually pleasing terminal telling me that it couldn't find and that the only way to reboot would be to press CTRL+D. I'm then given a command line and that's that.
Rebooting with the key inside works perfectly.
I reformatted my key and now there's nothing on it. I feel like somewhere somehow I added an entry to the boot process of my system and now I have to remove it. Never dealt with something like this before
Fstab:
/dev/disk/by-id/ata-WDC_WD2500AAJS-60Z0A0_WD-WCAV2M336077-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500AAJS-60Z0A0_WD-WCAV2M336077-part2 ext4 acl,user_xattr 1 1
[Code]....
The LaCie entry at the bottom there is my pendrive.
View 1 Replies
View Related
Apr 6, 2011
I am in Ubuntu 10.04 with its standard desktop environment. Exaile was working great. Now, suddenly it refuses to work. It brings up the splash/loading image and then dies. It works fine under a different user account. I completely restarted, completely uninstalled, completely reinstalled through the Ubuntu Software Center. No luck. I then tried to run it via a terminal.
Here was the output:
wmeler@ubuntu1004:~$ exaile
INFO : Loading Exaile 0.3.1.1...
INFO : Loading settings...
INFO : Setting up deferred idle manager function...
INFO : Loading plugins...
INFO : Loading collection...
INFO : Loading devices...
Traceback (most recent call last):
File "/usr/lib/exaile/exaile.py", line 52, in <module> main()
File "/usr/lib/exaile/exaile.py", line 49, in main exaile = main.Exaile()
File "/usr/lib/exaile/xl/main.py", line 84, in __init__self.__init()
File "/usr/lib/exaile/xl/main.py", line 189, in __init
location=os.path.join(xdg.get_data_dirs()[0], "covers"))
File "/usr/lib/exaile/xl/cover.py", line 121, in __init__self.load()
File "/usr/lib/exaile/xl/cover.py", line 330, in load data = pickle.load(f)
EOFError Exception in thread Thread-4:Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner self.run()
File "/usr/lib/python2.6/threading.py", line 484, in run self.__target(*self.__args, **self.__kwargs)
File "/usr/lib/exaile/xl/hal.py", line 66, in connect logger.warning("Failed to connect to HAL,"
AttributeError: 'NoneType' object has no attribute 'warning'
View 2 Replies
View Related
Jul 28, 2010
I've got a strange issue. I used without problem my Olmypus camera with oS 11.2 and older but sinds 11.3 and the new KDE, nothing happens anymore when I plug my camera: nothing appears in the device notifier, nor in Dolphin. It did in the past, with oS 11.2 and KDE 4.3.x. But, in IceWM, with Dolphin and Digikam it does work (it appears like a USB stick). Not in KDE with the same applications.What I wrote in the bug report:
Steps to Reproduce:
1.Plug your digital photo camera in a USB port
2.Optional: open Dolphin
Actual Results:
Nothing happens
[Code]...
View 9 Replies
View Related
Aug 14, 2010
Skype does not detect my webcam, despite other programs such as aMSN and Kopete being able to detect my webcam.The 'lsusb' command says the following regarding my webcam.Bus 002 Device 002: ID 046d:08ac Logitech, Inc. QuickCam CoolI'm using Skype version 2.1.0.81 beta which is the latest version.I'm running Opensuse version 11.3 the 64 bit version
View 9 Replies
View Related
Jul 14, 2011
I have Dell 1530 laptop which comes with windows vista. i just want to run windows xp on that but i am unable to install then what i did is just installed OpenSuse over windows vista(erased) only suse is there now i want to install xp on it but i am getting problems (windows xp CD is not detecting by suse).
View 8 Replies
View Related
Dec 19, 2010
when I plug headphones into my computer, sound comes out through both the headphones and the computer's speakers. Is there a way to disable the speakers when headphone are plugged in, or even disable them altogether?
View 1 Replies
View Related
Oct 17, 2010
I am having a weird problem here. The open programs are closing secretly without giving any indication or issuing error. For example I open couple terminal and some minutes later I look at my screen, boom they are not there anymore. This issue is not just limited to terminals, other gui apps suffer from the same thing. Does anyone know if any program or service would do such a thing?. I am scratching my head here to figure out why that is the case It just started happening today.
View 2 Replies
View Related
Jan 26, 2010
i just installed openSUSE on my machine which had windows 7 in other partition as primary partition. Now after rebooting i see the green screen showing only 2 options
-Desktop -- openSUSE 11.2 -***
-Failsafe -- openSUSE 11.2 -***
how do i get my windows 7 in the list.
View 9 Replies
View Related
Feb 22, 2011
I just got OpenSuSe 11.3 installed in a machine with two 160GB drives. I took all defaults at installation, works fine. Going to YaST expecting to detect and partition it. Not there. System Information, however 'sees' both disks. How do I partition and attach this disk?
View 9 Replies
View Related
Jul 2, 2010
I have SLES11 installed on server. I have attached 2 SAS cables which are connected to External storage device. I have connected 3 machines to external storage device. It shows total 6 ID�s. I want to know which 2 are from which machine. I would like to find out the WWID number of HBA�s on SLES 11 machine.
View 3 Replies
View Related
