Hardware :: Multiple Monitors With Nvidia - Ubuntu
Feb 20, 2010
I'm running a lenovo laptop with an nVidia Quadro FX 570M and Ubuntu 9.10.
I cannot get my external monitor to work properly for me (using nvidia-settings). It basically creates a single continuous monitor space across both the external and the inbuilt monitor (maximising a window, covers BOTH monitors and the gnomepanels run across both monitors)
I think its related to my xorg.conf settings, which are as following, Can any one help:
(It used to work for me when I was using ubuntu 8.4)
I'm using a NVIDIA 9600M GT on my laptop running Ubuntu 10.10. The laptop has a 16:10 display, I also connected my 16:9 LCD TV via HDMI. I would like to use them as clones. The problem is, as my TV has a different aspect ratio than my laptop display, the image does not fully fit on the TV. For example, when using a resolution of 1280x800 (16:10), one tenth of the width of that image is missing on my TV, as it has an aspect ratio of 16:9.
In Windows, the NVIDIA software stretches the image so that it appears a little distorted on my TV, but at least I see everything. Is it possible to do that in Ubuntu?
Anyone have a multi-card, multidisplay setup working with gnome 3 and Fedora 15? I have two nvidia 9500GT cards driving 4 monitors (2 per card) using the proprietary nvidia drivers (270.41.19) The setup had been working fine with the previous version of Gnome and Fedora 14. I was using xinerama to have one large desktop spanning 4 screens. No problems until I upgraded. KDE works after configuring using nvidia-settings, however gnome 3 is not useable. I get two screens black (but with mouse pointers when I move the mouse) and the right two screens with the background but the activities corner in the right hand side of the right most screen, rendering it useless.
I've always used Debian with a single monitor and no need of proprietary drivers, because I usually don't do graphics or multimedia. Now I'm asked to set-up a machine with 3 nvidia video cards (770) and 4 monitors and everything went south. I started with just 2 monitors connected to 2 different video cards, not wanting to push my luck.
I installed a fresh Jessie and followed the instruction to install the nvidia drivers and tools from the Wiki. Everything went smooth. After reboot I executed (as root) nvidia-settings and I configured the two monitors to be one to the right to the other, with BaseMosaic option (at this point just one monitor was active) I saved the configuration to /etc/X11/xorg.conf , I even executed nvidia-xconfig as suggested, I rebooted and nothing happened, only one monitor was working, while the other -- looking again in the nvidia settings -- was still disabled.
I then tried with xinerama option and things are even worse, since now both monitors are black. I can login in one textual shell, but then I don't know what to do, since in my 10+ years of linux ... I never had to mess with X server. Is there a way to at least recover a working X without reinstalling everything?
I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminals in my Linux workstation.Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea).I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example.
My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. All the tutorials I read (like this one) only tells how to use multiple monitors but doesn't answer my question about keyboard shortcuts.Does Linux (Ubuntu 10.04 Lucid Lynx or Debian 5.0.5 Lenny) support this envisioned setup (Different workspaces in a way that keyboard workspace switching only works in the current monitor) ? If so, how?I haven't tested this setup, that's why I'm asking. In this question the user says it works exactly how I want it to behave, can someone else confirm it?
So essentially, I have 3 monitors and i'm attempting to run 2 different window managers/sessions at once split up on the monitors. It is intended to be like this:
Code: [GNOME/Compiz - Screen0] - Left Monitor[code]......
I use Kubuntu 10.04. I want to use multiple monitors in an extended way. When i connect a monitor to my laptop, i get the same desktop view on both monitors. When i go to system settings - display - multiple monitors, i see the message: "This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration".
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
I'm running Ubuntu 10.10 x64 as a guest in VirtualBox on top of Windows 7. I recently bought a second monitor, and I want to set up my Ubuntu guest to use both monitors. I configured VirtualBox to give two displays to the VM, and two windows are displayed when I run the VM, however, the Ubuntu guest only uses the primary screen and does nothing with the second--the second screen is just black.
When I go to the monitor settings, only the one monitor is detected (as an "unknown monitor") I have the latest guest additions installed and the driver under System-Administration->Additional Drivers is shown as installed and working correctly. I don't have any issues with the single display--it shows in the correct resolution, and works fine if I set it to fullscreen or seamless mode. Any thoughts on getting Ubuntu to detect the other screen?
I've been using linux for roughly 12 years now but I've always avoided linux on the desktop since touching X back in the day was quite a hassle. I recently decided that rather than keeping my windows desktop full of 15 PuTTY instances, I should rock the *nix desktop.
I started by installing Ubuntu 10.10 Desktop. It detected my two monitors handing off a pci express card just fine. I decided to install the ATI drivers when it prompted me - the proprietary drivers would let me select to use the monitors separately, but would always just default back to mirroring the screens. I was unable to get it to stop that, so I had to go back to the open source drivers. Which is fine, I don't really need the 3d accel. Roll forward a week, I ordered another video card to add another screen. I purchased another ATI card, since word on the street is that same-vendor chipsets play best together. This one had to be PCI, if this matters.
dmesg reports the new card is fine and happy, but the Monitors GUI thing doesn't detect any monitors off the new card, or report anything about it. So: what should I do to make the second video card get noticed?[URL]...
Got Ubuntu installed with not much trouble, tho I found the install CD not as helpful as it might be. Anyway, I have three monitors and want to get them running, same as in XP. Is there somewhere I can read up on this? At the moment my worst card is on the lowest PCI slot, and as I understand it, that makes it always the default, but XP has no trouble with that. Ubuntu's monitor setup page tells me 'unknown monitor' and seems unhappy with the graphics abilities of the card, but lspci reports all three cards correctly, so they are 'visible' at least.
I just abandoned Windows 7 for Ubuntu. I am trying to setup my monitors on my desktop. I have 3 monitors (i have 2 graphics cards with 2 monitors per graphics card -- so potential for 4 monitors).
Currently I have 2 of the monitors working, but they only mirror each other. I tried going in to System-Preferences-Monitors to configure them the way I want to, but nothing i do stops them from mirroring each other.
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
How to get AWN to run on two monitors? I want a bar on each monitor. I used to be able to start two instances using a shell script below but that doesn't seem to be working now.
Playing around more with this and it looks like avant no checks to see if there is another instance running and will not start if there is. That is a bummer. Any way to change this?
dccrens@cavermax-ubuntu:~$ DISPLAY=:0.0 avant-window-navigator & [1] 15569 dccrens@cavermax-ubuntu:~$ ** (avant-window-navigator:15569): WARNING **: Another instance of Awn is running [1]+ Done DISPLAY=:0.0 avant-window-navigator
I'm trying to get 4 monitors working in Ubuntu 11.04 the way I would like to. I have two Radeon video cards with two monitors connected to each. With proprietary ATI drivers and the Catalyst Control Center I'm able to see all the monitors and Have Multi-Display setups, but they're separated for each video card. I can move items to and from Monitor 1 to Monitor 2, and Monitor 3 to Monitor 4. I'm not able to move windows from 2 to 3 or 4. The two separate display setups have their own set of workspaces too. I've tried enabling xinerama, but when I log back in after a restart the screen is just black and I'm forced to reboot manually. The two separate displays wouldn't be that much of a problem except that my keyboard doesn't seem to work on any application opened on monitors 3 and 4 after I've clicked on something in Monitor 1 or 2.
Below is one of the configs I've been messing around with:
how is the support for multiple, two or more, monitors in ubuntu (10.04) when using a graphic cards from AMD(/ATI), for example the HD 5770. (Which I'm currently using). I know that DP is required to use three monitors on a regular card. But other than that, will it work? Am I to expect a lot of work to be able to get it working? Or will it simply be impossible? (And yes, I know that AMDs(/ATI) drivers aren't always the best... Although changing to a card from nvidia at this moment isn't possible)
The background to my question is that I'm thinking about buying another monitor, same model as the current one I'm using, and later on perhaps expand to buy another one.Tried to search for it but wasn't able to find how the support would be in linux, and ubuntu in particular, since most I found is about the windows support, which should work quite easy and therefore isn't relevant.
I've been running Ubuntu 10.04 since it came out using two monitors, on the extended desktop option (the way I want it to be) with no problems. Today I unplugged the HDMI cable from my laptop and used it for my ps3 and now when I put the HDMI back in it will only run in the mirror desktop option. This is not acceptable to me as my 2nd monitor is a 50inch tv with a much higher resolution than my laptop.
When I uncheck the "Same image in all monitors" box it says to log out and back in. Doing this changes nothing(neither has restarting), it is still a mirrored screen.
When I click the detect monitors button absolutely nothing happens. Before today the detect monitors button did work.
How can I go about fixing this?
Edit: Also I just watched a show on the laptop and theres a lot of screen tearing, this didn't happen before.
I'm about to start a new build for my primary machine at home. The plan is to load up a server/workstation motherboard (ASUS KGPE-D16) with two 8-core chip, as much RAM as it will take (32GB) and to put two graphics cards in it. One to power my main 24" monitor (ideally via HDMI) and the other card to power two screens, one 24" on each left and right side via DVI (unless I can find a dual-HDMI card that meets my needs).
Does that make sense? Here's my question for this awesome group of intelligent individuals: What video card model should I choose? Obviously, I'd like them to match so I can SLI / CrossFire if I really want to, but what setup should I plan on to have a good experience managing multiple displays on multiple video cards?
Oh, and budget is probably up to about $300 per card, maybe a little more if it makes a lot of sense.I'm not alone in having tons of problems with trying to get multi monitor support in the last few versions of Ubuntu, and honestly it's the only reason why I'm still running Windows7: the multi monitor support is just SO DAMNED easy! I shouldn't have to spend this much energy thinking about video card model- it should just work, shouldn't it?
I experience very poor desktop performance on my system. General clicking responsiveness is poor, taking over second or two to focus to a new window, move windows around, ... etc. The Xorg process constantly uses over 60% of the CPU even when I'm doing nothing, and when I do click around it will quickly go up near 100% usage. Performance is initially OK when I first launch into my Gnome environment, but it soon deteriorates within 30 minutes or so. Eventually, after days of being up and running, my desktop will crash.I am running Ubuntu 10.10 with latest upgrades. I have four monitors attached to my "nVidia Corporation G98 [Quadro NVS 420]" graphics card. I am running the "NVIDIA accelerated graphics driver (version current)" recommended in the Ubuntu "Additional Drivers" app. I get a fair number (hundreds) of these in my /var/log/Xorg.0.log:
though they don't appear constantly while my desktop is running (I assume they may come in batches?). Not sure if they're relevant. A separate issue, though possibly related, is the SpeedCrunch app (a desktop calculator) is guaranteed to crash my desktop as soon as it gets focus. Here's the relevant output of "lspci -v" which shows my graphics card:
Code:
03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for Quadro Plex S4 / Tesla S870 / Tesla S1070 / Tesla S2050 (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=03, secondary=04, subordinate=06, sec-latency=0
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
I have Ubuntu 10.04 running gnome and two monitors. I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: When I swapped my monitors over, the narrower (external) one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. Also the visible mouse pointer does is not aligned with the active spot, an x offset of one monitor width. I would like, in approximate order of importance:
I have Ubuntu 10.04 running gnome and two monitors.I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: When I swapped my monitors over, the narrower (external) one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. Also the visible mouse pointer does is not aligned with the active spot, an x offset of one monitor width. in approximate order of importance:to be able to select which is primary monitor.to have multiple configurations. configurations to be automatically selected based on which monitors are attached.configurations to be cycled (reliably) when display mode key is pressed. when a display is deactivated, for windows to migrate to remaining monitors. option to not change display resolution when mirroring, but to use side/top blanking bars to pad out screen.
I have been playing around a bit today and decided to hook my tv up to my slack box. I have an NVIDIA gt220 using the proprietary drivers which supports multiple monitors and I can get various setups like an extended desktop and xinerama, but what I can not seem to do, and what I'd actually like to do, is just have both the monitor and the TV display the same images. If it would work better/easier I also have a second NVIDIA card, although it is a different model. I haven't bothered trying that yet as it seems like it would be easier to configure one card instead of two.
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs) x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
I have an older computer with Arch installed that I want to use to accomplish most of my daily tasks using the command-line (Mailgrab, IRSSI, mpg123, Elinks, Vi, etc). I realize that there are many lightweight WMs out there that support multiple monitors, but it'd be nice if I could just use Screen or something to that effect to distribute my windows across two or three displays.
The 'Multiple Screens' tool, aka grandr, is very handy for setting up my dual monitors. But restarting my system restores the monitor setup to the (crummy) default settings. Is there a way to save these settings and make sure they are always applied when the OS boots? Putting these settings in my xorg.conf would be fine, but I'm not sure where or in what form the settings generated by grandr might be located, or if they're at all xorg.conf compatible.
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor 2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor) 3.) 3 to 5 seconds later the picute cuts out to the second monitor 4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
