OpenSUSE Hardware :: TV Card Won't Work Under 11.2?
Nov 17, 2009
I installed openSUSE 11.2 several days ago. Everything works fine so far, but my tv-card isn't willing too show me something. I've already searched the web for 2-3 days, but i could not find a solution.
kdetv says that it has "no device found", xawtv works in rare chases but crashes completely when i try to maximize it. tvtime says "Driver refuses to start streaming", in the next line "Driver refuses to stop streaming" and sometimes something about wrong number of frames from bttv.
The TV-card is a Terratec Terra TValue, it is still working fine under WinXP and did work under openSUSE 11.0. YaST-config is done, Nvidia drivers are installed, as well as v4l.
Some things that might help:
xawtv
Code:
This is xawtv-3.95, running on Linux/i686 (2.6.31.5-0.1-default)
xinerama 0: 1024x768+0+0
WARNING: No DGA direct video mode for this display.
[Code].....
View 5 Replies
ADVERTISEMENT
Dec 9, 2009
I could use some instructions on how to get firefox to read and use my cac card. Under Yast the card reader shows up in hardware. I have install pcsc ccid and coolkey through Yast but not sure if I need to do anything else. I have followed instructions for loading the device in firefox but it does not load my certs off of the card.
View 8 Replies
View Related
Feb 13, 2010
In new Acer Extensa 5635G i install 11.2 but lan card don`t work,wireles too!Hеrе info
Code:
/sbin/lspci
07:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
09:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
/usr/sbin/hwinfo
[Code]..
View 5 Replies
View Related
Dec 25, 2009
I just got a new graphics card (all specs below) and when I start up the computer, it loads the BIOS, then says it's loading grub 2, then says, "Initializing gfx code..." and hangs there forever. How can I diagnose this and find out if the card will work with my computer and opensuse 11.1?
CARD SPECS
------------
NVidia GeForce 8400 GS
[code]....
View 5 Replies
View Related
May 10, 2010
I just installed opensuse 11.2 on my laptop in a dualboot configuration with windows 7.I prefer using suse, but also recognize, that once in a while, windows is useful.One of the things i like to do in linux is handle my photos with f-spot/gimp, but for some reason my laptops built in card reader is not recognized by the system. If a card is inserted, it doesn't even show up in the partition manager..?I'm not completely new to linux, but i'm not an advanced user either, so i can't figure out what to do here
View 5 Replies
View Related
Sep 5, 2010
How do I get the s-video out to work. I have a Visiontek Xtasy Radeon 9250 128mb Pci Video Card and OpenSUSE 11.3. I attempted to install the ATI drivers and doesn't really seem to work at all... With the default install i get flickering and black and white output on my TV and it calls my tv "uknown monitor" in the video card settings. I had wanted to setup a spare computer to output multimedia to my TV in addition to being a home server....
View 4 Replies
View Related
Jan 22, 2011
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies
View Related
Jan 30, 2011
I am trying to get the wireless lan to work on a Lenovo 3000 n100. Currently the light does not come on and the card does not work. Cnet says that this computer has an intel pro wireless 3945abg however /sbin/lspci -nnk Yields 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) ubsystem: Broadcom Corporation Device [14e4:0465] Kernel driver in use: b43-pci-bridge
View 9 Replies
View Related
May 8, 2010
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
View 7 Replies
View Related
Dec 23, 2010
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies
View Related
Apr 5, 2011
I recently installed Suse 11.4 on my Dell Latitude 2110 netbook using the KDE live distribution, and, after that, the Broadcom wireless ceased to work. To enable the wireless connection, I have to press Fn + F6. If I do it now, the wireless led indicator turns on for a couple of seconds, then turns off again. Moreover, the option to enable the wireless connection in the network manager is greyed out
lspci output:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
iwconfig output:
Code:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Encryption key: off
Power Management: off
dmesg output:
Code:
[8.330963] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[8.362403] brcm80211 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[8.362422] brcm80211 0000:0c:00.0: setting latency timer to 64
output of rpm -qa | grep broadcom:
Code:
broadcom-wl-kmp-desktop-5.100.82.38_k2.6.37.1_1.2-7.pm.8.1.x86_64
broadcom-wl-5.100.82.38-7.pm.8.1.x86_64
View 9 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Dec 6, 2009
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
View 9 Replies
View Related
Sep 25, 2009
I just installed ubuntu 9.04 and i cant get my pci card to work. its a linksys and i have the drivers and installed them with ndiswrapper. I don't have an ethernet cord that runs to my computer. When i tried the wlan0 up i believe it said that there is no directory. Then i was reading a lot of forms and tried the iwconfig and i got the essid put in and i don't know how to get the encryption key in. i made the alist for the driver and when i tried the wlan0 up it said there was no directory and then i tried to do a scan anyway and it the said the network was down.
View 7 Replies
View Related
Feb 13, 2010
has anyone tried to get the telus usb air card to work with ubuntu 9.10. have a friend that i am going to try live cd first to see if every thing works. he has a usb telus air card, will ubuntu just pick it up or is there a special way to config this one
View 2 Replies
View Related
Nov 21, 2010
i have mother bored gigabyte g41mt es2lbut my soud card built in is realtek ALC887it dont have cofig and not in alsa base
View 1 Replies
View Related
Jul 26, 2009
I have a laptop with ubuntu installed. But I cant get the wlan to work. When I had vista on it I had to use a combination on the keyboard to "activate" the wlan. ( FN - F1 ). But on ubuntu this wont work. Ubuntu don't recognize this function because it was made especially for my computer. In the trobleshooting guide of wlan point 5.2.1 it says that I have to activate the card from windows. But I dont have windows on the computer anymore, even if I had it would just disconnect when booting to linux. How can I activate my wlan card without windows, or the Function keys? (ubuntu have the driver) it only says that its "Disabled".
View 9 Replies
View Related
Aug 24, 2009
My server has 1 - PCI-e 1x slot and 2 - PCI-e 8x slot. Can I plug a 1x sata card into the 8x slot? Will it work? or do you have to have a 8x card?
View 1 Replies
View Related
Oct 17, 2009
I loaded ubuntu onto hard drive and like it well except can't get sound card to work, have deleted all previous on hard drive incl. Card driver that worked on windows. Only detail on cerd is "Creative labs, Mod CT4740 Trade name FC Ser. No. M4740910001586".
View 7 Replies
View Related
Jun 27, 2010
I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder
However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64
The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.
View 2 Replies
View Related
Dec 18, 2015
I decided to start of with Debian. I'm having trouble getting my wireless connection to work. I think i need drivers or something, i can't make a wireless connection. And it is a bit difficult for me, as i am new to Linux, and I'm not sure what I'm doing when i am writing these commands.
My wireless card is a Broadcom Corporation BCM43142 802.11b/g/n
I have been using Raspberry PI a little, so i am familiar with the terminal.
View 3 Replies
View Related
Mar 19, 2011
Im running Pure:Dyne, an audio-centric distro, and so far I have not been able to get my usb modem to work. Im using a Huawei EC168 and my carrier is Alltel. Im totally new to Debian as well... Im doing this off of a live disc then I plan to install it once I know Ill be able to use my internet (its my only internet...) The card doesnt seem to be recognized other than as a storage drive or something, since its preloaded with the software for windows that comes with it.
View 5 Replies
View Related
Jan 21, 2010
I'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
View 8 Replies
View Related
Jul 13, 2015
I have a Thinkpad X220 (stretch/sid) with a built-in SD card reader.But when I plug in an SD card it won't show up in the file manager (thunar), nor as a /dev/sd* or /dev/mm*.. URL...
Code: Select all$ udisksctl status
Just my internal SSD shows up.How do I get my SD card reader to work?
View 5 Replies
View Related
Mar 11, 2011
This TV tuner PCI card does not work with my linux. I tried it in a windows box and it worked great. I tried it with MythDora and found it non functional. Hauppage says that it should work with linux. VLC plays the out put of the tuner card just fine but cannot change channels.
Post added at 12:16 PM Previous post was at 01:48 AM this Linux box has 8 gigabytes of ram and is running x86_64 version of Linux
View 14 Replies
View Related
May 24, 2011
i'm new to linux, and recently installed fedora 14 on an old hp pavillion dv2700. it originally had vista home premium, but the hard drive crashed and had to be replaced with a new one, which had no os on it. i installed fedora several days ago, and everything worked perfectly until a day ago when suddenly the wireless card wouldn't turn on anymore.
my sister was using the computer (just videos) and a few seconds after she handed it back to me, the wireless light turned from blue to amber, and it said wireless was diabled, even though i hadn't touched the switch. before the computer crashed, it had a problem of the light always being amber when it woke up from standby, but flipping the switch off and back on would fix it. now no amount of wiggling and flipping seems to do the trick.
View 8 Replies
View Related
Jan 26, 2010
I have been messing around with ubuntu for a few hours now trying to get my wireless driver to work, but I am having no luck. It seems like I installed the driver right, and network-admin use to show the wireless, but I couldn't unlock it to mess with properties. Now it doesn't even show wireless, and I still can't unlock it, so I'm unable to get my wireless card to work.
View 9 Replies
View Related
Feb 23, 2010
My onboard lan card was cutting out during samba file transfers so I put in a PCI lan card and disabled the integrated one. Now I'm having trouble getting it to work. I appologize in advance, I'm completely ignorant as to how to change net cards in Ubuntu and am quite new to Linux in general.I'd copy and paste my lspci, but I can't connect to that computer nor the internet with it now.
View 2 Replies
View Related
Feb 25, 2010
My multimedia card reader does not work with new ubuntu version fresh install:
lsusb says:
Code:
Bus 001 Device 002: alcor micro corp. multimedia card reader
dmesg:
Code:
[6.544269] usb-storage: device scan complete
[6.544848] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[6.545482] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[6.546102] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[6.546728] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[6.547227] sd 2:0:0:0: Attached scsi generic sg2 type 0
[6.547338] sd 2:0:0:1: Attached scsi generic sg3 type 0
[6.547439] sd 2:0:0:2: Attached scsi generic sg4 type 0
[6.547550] sd 2:0:0:3: Attached scsi generic sg5 type 0 .....
View 2 Replies
View Related
May 2, 2010
I can't get my SAT card to work anymore for I'm installed 10.04.It worked fine under 9.10.Any idea how I can debug or solve the issue.
View 4 Replies
View Related
