I use 2 keyboard layouts. But when I change setting from the YaST interface in KDE, setting save only for the short time (may be some hours). Then I can't switch between layouts and have to use YaST again. What is it?
View 2 RepliesI made the mistake to install Ubuntu 11.04 without trying it first from a live usb. After 15 minutes switched to classic theme (Unity seems to netbook oriented and confusing to me). After 2 days I am about to go back to my beloved Ubuntu 10.10.
I added some keyboard layouts and also specified alt+shift as the command to switch between layouts. Unfortunately it is not working!
I have ubuntu 10.10 (System is up to date with updates)kernel 2.6.35-24 gnome 2.32.0 with two keyboard layouts US and German, US is on the top of the list.
System itself is installed as English. Although location is Austria.
Whenever i open a window not already opened in the session, like a chatwindow in skype, the keyboard layout is switching to german. I can change it back to US and it stays as long as i open no new window.
For Skype and chats it seems like having already opened a window to this contact is enough for the next opening of window to the same contact.
For me it looks a little bit like the settings are use different keyboard layout for each window and use default layout (how ever this got to be german).
So far i checked the keyboard layouts to have disabled all shortcuts changing the layout, checked that the seperate layout option is disabled and applied it system wide
What is the general way to switch the keyboard layout?
What works for me currently is the custom Section in /etc/X11/xorg.conf.d/kbd.conf.
However this section must include Option "Device" "/dev/input/by-path/..." which identifies the current keyboard. This works fine for my laptop keyboard.
However when I attach USB keyboard, keyboard switching does not work.
I also found somewhere it should be done via /etc/default/keyboard, but that does not work for me at all.
I have installed LXDE recently and I'm very happy with it,but there's one problem,which is that i can't switch the keyboard layout to another language,which in my case is Arabic,how do i solve this problem?
View 6 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View Relatedhaving problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI'm using Gnome and OpenSUSE 11.2, and my keyboard layout changes USA from Finland every time I reboot my pc. I have to delete USA-layout from keyboard preferences every time after reboot.
View 1 Replies View RelatedI installed open suse 11.2 yesterday stock Education edition DVD.
I changed the keyboard because it was generating garbage instead of english chars. (everything was stock from the CD)
The replacement kb is a newer one (I favor the old kb's).
eventually the language and layout of the keyboard changes - usually to Arabic or some Eastern alphabet.
I was really starting to like open suse, but if this persists it is unusable.
Something is misbehaving - any Ideas would be appreciated.
I'm running the default desktop env - gnome.
I am using openSuSE 11.3 and LXDE.
How can I switch between British-English layout and Greek layout in LXDE?
I have a UK keyboard, so I selected the United Kingdom layout on installation of OpenSUSE 11.3.However, something keeps automatically adding the USA layout, and switching to it ! How can I prevent this annoying and intrusive behaviour ? Deleting the USA layout is not enough, it seems. It just restores it again.
View 2 Replies View RelatedI recently switched my openSUSE 11.1 install from KDE 3 to KDE 4.4 via the one-click-install from [URL]... I was trying to add a German keyboard layout to the default US layout. But as soon as I enable keyboard layouts (via Configure Desktop-> Language & Regional -> Keyboard Layout -> Enable keyboard layouts), the default layout gets messed up (arrow, pos1, end keys etc. no longer work). I'm running openSUSE 11.1 on a Lenovo Thinkpad T61. Several keyboard layouts worked fine with KDE 3. Could it be that some KDE 3 settings are interfering with the KDE 4 settings?
View 1 Replies View RelatedI have 4 Keyboard Layouts and I want
Ctrl+Shift+1 for 1. Layout
Ctrl+Shift+2 for 2. Layout
and so on
is this possible ?
I've been using using Ubuntu and Arch with gnome for ages, but after the whole gnome3 and unity hubub, I decided to go with kde and openSUSE. and I'm completely loving it. However, I have one problem Ubuntu (gnome) has the option to choose the Faroese keyboard layout, but in openSUSE with kde, it's not an option. Now I really need to be able to write a lot, so I need the regular Faroese layout, otherwise I'm missing the letter "ð". openSUSE should really implement Faroese into the keyboard layout options
View 4 Replies View RelatedI have swapped backspace key with ` (grave) key. So I added a layout in the /usr/share/X11/xkb/symbols/us with the following lines:
key <TLDE> { [ BackSpace, BackSpace, BackSpace, BackSpace ] };
key <BKSP> { [ grave, asciitilde, dead_tilde, asciitilde ] };
Now the backspace and grave work well, but when I press shift + grave (previously backspace key), I get grave, not asciitilde.
This is strange because I tried the same thing (with the same us file) with Chakra linux and it worked without any problem.
I have a problem with keyboard layout and only happens with KDE applications. If I type at Firefox or Eclipse everything works fine. I already tried few stuffs like this How to enable Keyboard Layout on OpenSuSE 11.4 (Updated) but no luck so far. When I type ' + c in KDE applications I got:
ć
I was hoping ç
At Yast2 I tried: Portuguese (Brazil -- US accents) and others. Unfortunately I didnt found anything close to US - intl, US with deadkeys, etc
at console:
setxkbmap -model pc104 -layout us -variant intl (nothing)
setxkbmap -model pc104 -layout us_intl -variant intl (still nothing)
suse 11.4, kde 4, notebook hp dv7-3085dv
I just switched to xorg version wich has dropped HAL support. I was wondering how i can change keyboard layout as the default isn't correct. Should I add an udev rule, create a file in xorg.conf.d or can I enter the right layout anywhere in an existing config file xorg do reads that i'm missing?
View 3 Replies View RelatedI used YAST to set my keyboard layout to Belgium AZERTY. But my '{}@' keys dont work. [ALT]+[CTRL]....
View 3 Replies View RelatedI have openSUSE 11.2 with default GNOME desktop and i'm facing issues with keyboard layouts, which are changing randomly. Problem is that i have GNOME in Slovak language and therefore has openSUSE set durring installation my keyboard layout to 'Slovak' but i always change it to 'Slovak QWERTY' which suits me better.
Problem is that randomly system adds back to my layouts which are 'Slovak QWERTY' and 'USA' also original 'Slovak' layout which was previously removed.
I must always manually remove this third layout and it's very frustrating. Many times on fresh system boot it's anyway back and so on and on... Where may lie the problem? Why is GNOME not respecting my settings? In Ubuntu i never have these basic issues. Are there on system boot some specific SUSE triggers which are overwriting my configuration?
I updated from 11.1 to 11.2. Before some intelligent person says, I should never update but do a new install: a new install isn't better, then I have other problems to tackle. And I really would like updates to work.Well, I have the following problems and I hope you don't mind me listing them all in one post *it's difficult for me to type on this keyboard layout):1. home isn't found or set up. I have modified fstab to mount /dev/sda6, which is home, but it won't mount it at startup, and also not when it's just using the disk/by-id line that had been put in.
2. the keyboard layout is american, while the system language is set to German (I'm German and would like also my keyboard to know that). I had no chance to change that, even a loadkeys de-latin1 doesn't help3. OpenOffice drives me crazy. It just doesn't start properly, or at all. It doesn't open a number of documents, but it doesn't also give any error message. Sometimes soffice.bin is in the list of processes, but OOo is nowhere seen. After killing the process (or terminating it), I can start it, but have only the opening screen and cannot really open a document.4. printing doesn't seem to work, either.Needless to say that everything worked fine before the update
I have a keyboard layout built in Korean language, and when i installed openSUSE 11.3 by network installation i keep keyboard layout to Korean. But after installation can't write Korean but still see Korean font in Firefox, cuz i added its font on firefox configuration settings. What shall i do? I want installed in English but still need to use Korean fonts to write something.
View 2 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
How do I configure the keyboard shortcuts to switch workspace? There are no options for anything like "Switch to Workspace 1" etc in Control Centre->Personal->Keyboard Shortcuts.
I am using compiz with desktop wall, openSUSE 11.4 and GNOME.
This is probably a silly question but I couldn't yet find the answer and I guess someone else must have solved it already, so... How can I activate the keyboard shortcut ALT+SHIFT+TAB to switch to the previous window (As opposite to ALT+TAB)?I'm using gnome, I went to the keyboard shortcut panel, but I didn't know how to add a new action (one that is not already there).I also use another distro (Mandriva) on another computer, also with gnome and that key combination is already there, which is very useful for me.
View 2 Replies View RelatedI'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI use KDE since 4.4 so far with minor bugs, now on latest version my keyboard recuse to type the backslash '/' using Portuguese- Brazilian Layout, but the interrogation carachter '?' type fine...strange it works on 4.5, 4.4 and Gnome 2, but updating to KDE 4.6 its stopped working...
PS: I already set to Country:Brazil and Languages Portuguese and US, and in Yast/Languages Portuguese and US are set to default and secondary languages...
I installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.