Ubuntu :: Acer Revo 3700 No Sound Through Hdmi
Dec 20, 2010
I've just installed ubuntu 11.04 on my recently purchased acer aspire revo 3700. After completing the initial install of ubuntu, running all available critical and recommended updates, and installing and activating the 3rd party driver for the nvidia card I'm having trouble. I am getting good video through the hdmi cable to my sony bravia 32" tv, but no sound (sound works fine in regular tv or xbox use).
I'm relatively inexperienced with linux so I'm not entirely sure what information would be relevant and helpful to assisting me with deciphering this issue, but I will do my best.I've found no proprietary driver for sound through the nvidia ion processor, only one for the graphics arm. I would assume they are sharing a driver, but as its not stated I cannot be sure. The 'additional drivers' control panel calls it the 'NVIDIA accelerated graphics driver (version current)' The chip is the nvidia GT218-ION. Settings in sound preferences are high definition audio controller digital stereo (hdmi) selected for output.
results from aplay are:
UR@UR-Acer:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
[code]...
Ultimately nothing so far has worked. I'm not getting any sound from any application or the sound tests in the preferences hardware tab.
View 9 Replies
ADVERTISEMENT
Mar 11, 2011
I have installed Ubuntu 10.10 64bit on Acer Revo 3700. After a month of debug sessions and reading the threads in this forum, I still haven't got the audio working on HDMI. Strange thing is that, the HDMI works without any problem on Windows 7 (but alas, the 1080P graphics quality is very poor) The audio output is set to HDMI in the "Sound" settings. The audio is not muted and is set to full volume. I'm using Alsa version 1.0.23 with latest nVidia drivers on Ubuntu I went through the below thread:[URL]but it did not help me either.I've attached most of the command outputs and content of my ~/.asoundrc (as per thread #1670681)
View 1 Replies
View Related
May 26, 2011
My Acer Aspire Revo 3700 installed fine. I did the commands on this page to prevent the system from hanging on shutdown and reboot, and it went fine.
Against my better judgement, I allowed the system to install a new nvidia driver a couple days ago. Some other stuff was updated as well, so I don't know where to pin the problem.
The Problem: Now, when I shutdown or reboot the system, the system hangs with the Ubuntu logo on screen.
Copy of my dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[Code].....
View 9 Replies
View Related
Mar 6, 2010
Its been a few years since I gave linux a go but having just bought an acer revo and enjoyed xbmc on myxbox I thought I would give it another go.I downloaded the 64 bit version to usb stick and got to the desktop of the live install.Everything looks great but no internet access over both wireless and ethernet.I'm used to the wireless being detected etc in windows and even though I found what must be the network manager and put in my 64 bit wep code etc it couldn't find my wireless connnection.
I thought then that mabey the preinstall ubuntu doesn't do internet.Just to see if this was the case tried it with the netbook version on this I can get ethernet access but on removing network cable no access at all.I've got an old netgear router which I am replacing soon in case thats the problem.I don't want to install ubuntu unless I can get wireless internet/network access.Being a total linux newb some of the guides I've tried to follow on the net presume I have too much knowledge.So I end up getting lost.I go into wireless connections psecify name of network (SSID ie Wireless) put in the Mac code of my router and the 64bit WEP key. I don't touch the lpv4 and 6 settings as don't know what they do Still no joy
I wonder if anyone out there has a revo 64 bit version of ubuntu working and could help mme find my wireless connection.Just an update I reput the settings into the netowrk manager and it worked although very slow.Is this because its a live install. I'll now try it with ubuntu 64 bit and see if I can get access...I seem to be getting there although very slow
View 1 Replies
View Related
May 30, 2010
xbmc 9.11 HTPC (confluence skin) on an acer revo 3610 running ubuntu 9.10 can someone possibly help me as I cannot get WOL to work. Went into BIOS under power management and enabled WOL.I have used this guide to set up. HOWTO: Set your system up for Wake On LAN (WOL my ipconfig is
Quote:
xbmc@xbmc-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 90:fb:a6:2c:b2:1f
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::92fb:a6ff:fe2c:b21f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I then tried to follow this guide HOW-TO set up Wake-On-Lan (Ubuntu) and followed those steps also still nothing. I deleted this script however as it did nothing and didnt want to have two scripts that might be interfering with each other.How can I check that the magic packs are being received by the computer? I think it has something to do with the MAC address but Im a linux noob and gettng kinda lost now, ANY help would be much appreciated. I also have a another linux computer hooked up on the network to test however I want to WOL via the internet incase I am traveling and need to wake up my htpc. Can anyone please help me as I think I have the scrips installed and Im just not doing something simple like configuring the magic packs correctly to send the information.
View 6 Replies
View Related
Dec 29, 2010
getting audio over HDMI on a Revo R3700 with Ubuntu 10.10?
aplay -l
Code:
living-room@livingroom-Aspire-R3700:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
[Code].....
View 5 Replies
View Related
Sep 12, 2010
I am having a problem with my Revo 3610 which is connected to my TV via HDMI.
For some reason it will not do the HDMI handshake with the TV, so my TV does not think that there is anything in the HDMIport.
I have tested the TV and it works fine with my laptop and DVD player.
It does work sometimes, but this time it's failed for two days in a row. I've tried rebooting and turning the TV off and on, but nothing helps.
I can trick the TV to listen to the HDMI by connecting with my laptop and then changing the HDMI back to my revo; this results in the image going through nicely but there is a big fat "Check signal cable." message on the screen.
I have also tried changing the resolution in the revo but this does not help either.
View 1 Replies
View Related
Feb 27, 2010
I'm running the latest version of Ubuntu, and have upgraded the NVIDIA drivers to the latest ones from the website (not sure if that's part of the problem). I've got XBMC installed and it seems to be working, but I can't for the life of me get anything but Stereo passed over HDMI, according to my Onkyo 606 amp that is anyway.Can anyone tell me if it's actually possible, or if they've actually managed it, to get surround sound playing over HDMI on an ACER Revo running Karmic?
View 1 Replies
View Related
Jul 17, 2010
I've just been setting up my new Revo with Ubuntu for use as a HTPC with XBMC etc..
Previously I had audio coming out through HDMI, but now I have lost all devices under the sound settings.
I was using alsa mixer, is there any way of getting this working again? A HTPC without sound is a bit useless!
I can't really say what I've done, as I took a few approaches to it, but I've tried to remove everything so it's back to normal. I think maybe it happened after updating some NVIDIA drivers..
View 6 Replies
View Related
Oct 11, 2010
I need a new web cam to work under currently 10.04 but by the end of the week 10.10! Anyway the revo is not that powerful specs here:
Processor: Intel Atom Dual Core 330 1.6GHz
Memory: 2GB
Graphics Card: nVidia ION
good cams that work well on the revo's low power?
View 1 Replies
View Related
Feb 23, 2010
How big does the USB stick need to be? I'm using the ubuntu 9.10 Live download (706mb)
View 3 Replies
View Related
Sep 1, 2011
I installed Ubuntu 11.04 to my new laptop. Otherwise Ubuntu is working well but HDMI sound is missing.After installing Ubuntu 11.04 I ran Update Manager. After that I followed these instructions:
https:[url]....
aplay -l output is:
=============
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1[code].....
View 8 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Jun 16, 2010
Is it possible to install XBMC onto Ubuntu Lucid and still have passthrough audio to a connected receiver (i.e. a workaround with Pulse)? I have an Acer Aspire Revo R1600 connected via HDMI to my Onkyo reciever. I am able to get desktop sounds and play MP3 files from XBMC, but passthrough has been a bear. If I tell Pulse that my sound device is analog, for some reason I can get XBMC to pass through audio. However, I would like to keep system sounds and have the passthrough ability if it's possible. As I understand it (from about two weeks of fidgeting) this is a limitation of Pulse and it's lack of pass through support. It seems so simple. I've tried multiple different .asoundrc configirations none of which have gotten me there. I've upgraded Alsa. I'd rather not run XBMC live if I dont have to. I'd like to have the ability to have a workstation for when I need it. I've upgraded to the latest NVIDIA driver available from their website - 195.36.31.
View 9 Replies
View Related
Dec 14, 2010
I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.
I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).
I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.
I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?
View 9 Replies
View Related
Jul 20, 2010
I just installed oS11.3 on a new Aspire Revo R3610 which has the Intel Atom 330 chip and Nvidia ION graphics.
I noticed that the CPU is always running at 1600Mhz and doesn't throttle down when there is no load. Do the Atom cpus not throttle down or is there a setting in 11.3 that I can change?
I installed the 64bit of oS 11.3.
View 3 Replies
View Related
Apr 22, 2010
when I connected to the L32 HDTV over the HDMI cable, picture came up, and I thought great, plug & play. But the title bar and taskbar were missing and I soon learned that this cheap Vizio TV has a native resolution of 1366x768 and simply upscales and chops off what it considers "overscan" when you drive it at the proper 720p 1280x720. To add to the problems, it doesn't report the correct EDID modes (look at your /var/log/Xorg.0.log to see the probes or install and use the read-edid package) so 1366x768 isn't an option out of the box. I spent days mucking around with /etc/X11/xorg.conf with custom Modelines, strange options and copying confs from other threads, trying to get it working at 1366x768 or 1360x768 or 1368x768 (some variations seem to work for some people)
In the end, I didn't have to touch xorg.conf at all =) All I had to do was install the newer NVIDIA 195 drivers!!! Then you get the lovely Overscan Compensation slider in nvidia-settings, and all is well. First, you will have to apt-get remove the old drivers (probably -185 or -180). Install apt-show-versions for an easy way to do that. I had a bunch of junk, I just removed all packages that had nvidia-someversionnumber in the package name.
[Code]...
View 5 Replies
View Related
Feb 21, 2010
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
View 4 Replies
View Related
Aug 29, 2010
For the benefit of all other users i am specifying the steps i followed to get HDMI audio to work after a lot of toil.
Laptop configuration: Acer 5738 Ubuntu (10.04) Lucid Lynx
visit the link [URL] and read specifically the HDMI Audio section. Don't worry if you are unable to test for the sound. Connect the HDMI cable from the laptop to your LCD tv. This should be trivial. Make sure you switch your TV to HDMI input from its menu options. After enabling the HDMI configurations on your laptop using Step 1. Click on System--> Preferences --> Sound. Click on the Hardware tab. By default it might be set to Analog Stereo Duplex. Go to Output tab. Change the Connector drop down from Analog Speakers to Analog Headphones. Go back to Hardware tab and select Digital Stereo (HDMI) Output. Function+F5 would direct the video output to your TV. Incase you have a problem redirecting your video output to the TV. Restart your machine with the HDMI cable connected to your TV. With the configurations you would be able to hear sound from your TV. Have a blast! I have tried this with Acer 5738 it might work with other Laptop configurations as well.
View 1 Replies
View Related
Jul 6, 2011
For the benefit of all other users i am specifying the steps i followed to get HDMI audio to work after a lot of toil.
Laptop configuration: Acer 5738
Ubuntu (10.04) Lucid Lynx
[code].....
View 11 Replies
View Related
Mar 19, 2011
I have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies
View Related
Sep 12, 2010
recently installed an NVidia GeForce 240 in my HTPC, and finally got it working correctly (as an HDMI-out display) n Lucid Lynx 64-bit.My problem now is that there is no sound, even though sound should be passing through, and I don't know where to begin to fix the issue.
View 4 Replies
View Related
Sep 22, 2010
Can someone provide me with the exact instructions I need to backtrace pulseaudio? I have a bug that a developer is asking me to do a backtrace and the instructions on the ubuntu site aren't very good. I tried exactly what it said and my problem is that it says to "run the program under gdb by doing
gdb pulseaudio 2>&1 | tee ~/gdb-pulseaudio.txt
unfortunately pulseaudio isn't actually starting when I do this (I kill the program before I do this command, I also add the appropriate text file so pulse doesn't auto restart). Not sure what's going on but I'd appreciate any help as I can't get sound out of HDMI (I get it but it dies out fast).
View 3 Replies
View Related
Jan 1, 2010
Trying to put up my HTPC with Ubuntu 9.10 but I cant get any sound to work. Im using a HDMI cable between the pc and TV. Computer is an Asrock ION HT/BD 330. Also running a 64 bit version of Ubuntu. I have upgraded all I know or think I know what to do but still with no luck. To start of heres my multimedia.
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:fae78000-fae7bfff
my cat /proc/asound/version is as follow
Advanced Linux Sound Architecture Driver Version 1.0.22.
Compiled on Dec 17 2009 for kernel 2.6.31-16-generic (SMP).
My lsmod is as follow:
Module Size Used by
vfat 13184 0
fat 59832 1 vfat
binfmt_misc 10220 1
ppdev 8232 0
snd_hda_codec_nvhdmi 6304 1
snd_hda_codec_realtek 288292 1
snd_hda_intel 30208 0
snd_hda_codec 96384
My modinfo soundcore is as follow
filename: /lib/modules/2.6.31-16-generic/kernel/sound/soundcore.ko
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 3A50BBE947364A4D9DB6A97
depends:
vermagic: 2.6.31-16-generic SMP mod_unload modversions
View 7 Replies
View Related
May 20, 2010
I have an HP 8510w laptop and I run ubuntu 10.04 out of an external harddrive.
I have no problem getting video over hdmi using the latest proprietary nvidia drivers however I cannot get sound through the HDMI cable.
I have read around without being able to find a solution.
Running "aplay -l" shows only my intel sound card and also there is no hdmi sound interface in the sound preferences (Only the normal output interface).
I am using the latest proprietary nvidia drivers (Believe it to be 1.95) and the graphics card is a Quadro FX 570.
how I can get sound out to work via the hdmi cable?
View 3 Replies
View Related
Aug 29, 2010
I put a hdmi cable on my note, I turned on the TV and ran to is a beauty but when I turned on the video ... the sound did not come. I went to System -> Preferences -> Sound and changed the output to "Digital Stereo (HDMI) output. And no sound came out. The boxes of note works perfectly.
Here follows some details of the hardware:
Code:
aplay -l
Lista de Dispositivos PLAYBACK Hardware ****
placa 0: Intel [HDA Intel], dispositivo 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Dispositivo secund�rio: 1/1
Dispositivo secund�rio #0: subdevice #0
placa 0: Intel [HDA Intel], dispositivo 3: INTEL HDMI [INTEL HDMI]
[Code]...
View 2 Replies
View Related
Nov 12, 2010
I have recently installed Ubuntu 10.10. Everything is working fine except I have no sound. When I use the command 'aplay -D hw:0,0 somefile.wav', I can get sound through headphones attached to the headphone jack. But I can't get any sound through the speakers. This is a dual boot desktop and the sound works fine under Windows, so no problems with hardware. The PC monitor is connected through a hdmi cable and I would need sound through the speakers. The output of alsa-info.sh is at
HTML Code:
<a href="http://www.alsa-project.org/db/?f=cb172534097c313b25836f77f2a40fef857102ba">alsa-info.sh output file.</a>
View 9 Replies
View Related
Feb 8, 2011
I'm using an HDMI connection, and the sound connection is unreliable at best. When it works, it is working fine, then all of a sudden (maybe because it isn't being actively used for an extended period of time)the sound connection vanishes. When at System --> Preferences --> Sound --> Output I'm not seeing any option for the HDMI connection currently and the sound is not working. All the volumes are unmuted and I cannot use a softphone nor .....,nor do videos that I have watched in the past with sound have any.
Last night when this happened, I rebooted and the sound was working just fine then. In the past, I was able to get the computer to recognize the HDMI connection has sound by momentarily unplugging it, then plugging it back in. Though both last night and today that hasn't worked.When I bought my computer, I had Windows 7 installed on it. The same thing was happening then, though it was always fixed via disconnecting the HDMI connection briefly, so there is the possibility of it being a hard ware issue.
I've also tried turning off the device (a HDTV in this case) and turning it back on, but that only solved it once or twice, and neither last night nor today.This is also a 64 bit computer, should that be relevant. Using Ubuntu 10.10, and the only available update to my system at the moment is Google Chrome, which I will be updating after this post.I will be restarting my computer after that update and posting back here if the sound is working, especially with note of whats listed at the System --> Preferences --> Sound --> Output if there are any additional options (from memory, there was an HDMI choice there).
View 4 Replies
View Related
Mar 5, 2011
Im trying to get the sound working via HDMII have a HDMI cable connecting my nvidia video card to the monitor... even i say the apps to output the sound through the device 1,3 , i dont get any sound..
View 2 Replies
View Related
Jun 9, 2011
I recently purchased a new video card a GeForce 550 Ti, but I haven't been able to get sound working over HDMI.
I'm running the latest version of Ubuntu (11.04) and have installed the proprietary drivers through Additional Drivers.
Code:
The card is being picked up by alsa and I've configured Ubuntu to use HDMI in sound preferences:
aplay -l:
Code:
When I check alsamixer this is what I see:
ALSA reports that version 1.0.23 is installed, although I thought 11.04 came with version 1.0.24?
cat /proc/asound/version:
Code:
I've tried purging ALSA and reinstalling it but it didn't help. Is there anything I can do? Does anyone know if this card is supported by ALSA properly yet? I hate the thought of having to go to Windows to get this working
View 3 Replies
View Related
