I was just wondering if there is a way to capture current state on a machine and create live cd from it?
If not - what is the best way to create Live CD with optimazied system updates and configuration packages.
I'm trying to list all ports less then 1024 on my current machine which are open in the listening state, one port per line
View 1 Replies View RelatedCode:
I have just inserted a new battery. However, there is no settings that show the capacity and current charge time, etc.
When I click the battery icon. All I get is the current percentage.
Is there anything that will give me more details about my battery i.e. capacity, charge rate, time to full charge, etc?
I have a fedora 11 installation on my machine , with a customized partitioning of the 500GB sata HDD , I wanted to create a exact replica image on a USB stick , for future installations on other 500GB sata HDDs .. while only need to create a copy of the 5 GB (/boot + / ) while the remaining 400 GB + is a Data Logger partition which can be created by a script. I tried doing a rsync .. but have got stuck up with the bootable drive configs et all ..
View 2 Replies View RelatedThis is the first time that I try to install Fedora 11 to my Cd-driver-less notebook. I try to boot from my USB stick it did not work. For me, only feasible solution is to boot from HDD.
However, how do I create bootable HDD from Fedora 11 live CD? I have already downloaded and burnt Fedora-11-i686-Live.iso to a CD. Since I cannot boot from my CD, I need to boot from the HDD. But how?
Also some additional info: I have already formatted my notebook's HDD by hooking it to my PC. So I can only access my notebook's HDD from my PC (winXP installed) As far as I can guess, I need to partition and format my notebook's HDD based on fedora's requirements. (I do not know how?) And copy some boot and installation files to these partitioned disks. (don't know neither)
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies View RelatedBefore going too far it may be simplest to answer the question "Does Live USB Creator create a working system for Windows 7?" If not then don't bother reading further. I have installed Live USB Creator on a 32-bit Windows 7 computer but when I run it I can't for the life of me get it to recognize any type of drive. I've read and tried the instructions of using the command line with the --force [drive]: but that has no effect Maybe I am misunderstanding this whole program. From what I read about it, this program will create a working Windows system, place it on a USB stick and then run Windows on a different computer. In my application I would like to run it on my work computer which has Windows XP. If this application should work then will I have complete access to all my computer drives and files and the network/internet? I imagine I would need to install all necessary programs so that I could use them in Windows 7 and would I need to install those programs on the USB stick or could they be on a local hard drive?
View 1 Replies View RelatedThere are not SSDs with TRIM support available in my region that fit into my laptop (1.8", IDE, ZIF). I'm running Ubuntu 10.10.
Most articles (or questions on superuser) I've come across concering TRIM (or the lack thereof) date back to 2009, when not many SSDs with TRIM support were available and OS support was still very fresh.
I'm interested in the current situation, but I couldn't find too much information about it.
What are currently the "best practices" for using an SSD without TRIM under Linux?
I've read about the wiper script included with hdparm. Do I understand correctly that I could use this to free unused blocks, e.g. by running it once a month?
Some sources state that HFS+ (the default-filesystem of Mac OS X) doesn't suffer as badly from lack of TRIM as other filesystems. How about linux filesystems? Are there filesystems that are better suited for SSDs without TRIM than others?
Can anyone update me a little on the current styate of Radeon Drivers? I have a laptop with an RS690M video card on Slackware64 & Slamd64
There is
1. Kernel driver (drm/radeon.ko) but I am finding it difficult to find comments on it, except that it does some power management stuff
2. Proprietary fglrx had a recent significant update, and now talks to my card after a fashion (Experimental support)
3. OSS Radeonhd for X, which I gather is probably the worst atm but it's what I have in xorg.conf
4. OSS radeon driver, which is supposed to have more work done on it.
I don't need framebuffer stuff - the screen is hard enough for me to read as it is, but I do like to watch the occasional tv program or dvd and I'd like the video to be keeping up in full screen. ATM, Xvid, Opengl, and just about everything fails to, except sdl.
I have a new clean install of 64bit current slackware on a machine which previously run 12.1 to 13.1. It had suspend to ram working quite reliable before, but now i get black screen (sometimes with nonresponding mouse cursor on it) at every second or third wake-up.
I found out that it is not a complete lockup - full access to kde desktop could be restored by hitting alt+sysrq+s followed by alt+sysrq+l several times. I wonder what is causing this? How to get it to wake up normally at once?
Edit: I've installed latest nvidia drivers (260.19.44) for GeForce 8500GT card - previous version (260.19.21) of drivers exhibited the same behaviour in my current install of slack.
When trying to rebuild a RAID1 on a FastTrak TX4310 controller after a disk was replaced the below message is given:
Code:
[root@SAMBA Samba]# dmraid -R pdc_gigcjhdfa /dev/sdc
Volume "pdc_gigcjhdfa" is not in rebuild state (current: 16)
Rebuild: cannot rebuild from current state!
I'm trying to create a live CD of my current CentOS installation. I want it to be almost like a backup, so whenever I want to copy my current installation to another computer I would simply install from my custom live CD.I know this is possible, and I found some resources on the net, but they all seem to only create a minimal version of CentOS; I want to have all the current functionalities available to me at present, including all of my development functionalities, Apache and samba settings, etc.
View 1 Replies View Relatedi did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
My linux laptop isn't able to detect the current battery state. I am using slackware64 13.37 xfce with a Toshiba L645 laptop.
This is what I came up with so far.
Code:
lsmod
Module Size Used by
snd_seq_dummy 1479 0
snd_seq_oss 30116 0
[Code].....
I use a program called conky that reports my cpu frequency and most of the time it's always at 0.93GHz instead of 2.53GHz. Sometimes it jumps to 1.20GHz and 2.53GHz but falls back down to 0.93GHz. Is this normal?
I want to install Ubuntu 10.04 to another machine alongside that other machine's XP. I know I could just run the install disc; but I'd like to take what changes I've made to Ubuntu along with it - for instance, TrueCrypt, Simple Backup, AdobeReader 3 (I think that's an addition), K3b, MuseScore, and some other applications I've added along the way. Also, I went thru some Terminal commands to get Brasero to copy CD's recently and would like to avoid doing that again.
View 1 Replies View Relatedalrighty, long story short, I screwed up. I had installed a copy of ubuntu 9.1 to my sda1 partition and a copy of windows 7 to sda2 and it worked pretty well, but after needing to change the partitions around, I deleted sda1 and did a wubi install. I forgot to adjust the mbr before deleting the ubuntu install and my live CD is still running ubuntu 9.1 (think that's grub 1.5) and I can't update the live CD, as my only functioning OS is currently running off it. I suspect, therefore, that the mbr is still pointing to a now non-existant partition to find the boot files. So, in short, how do I use my current live CD to allow me to boot into windows in this situation? my current partition table is sda2: windows 7/wubi, sda1: media/backups
View 2 Replies View RelatedIf i had a clean install of the same version of Ubuntu i'm currently running (10.04), could i copy my current home folder over to a new machine and replace that home folder with current one?
View 2 Replies View RelatedIs there a way to get a list of all packages installed since install (that are currently on the system) and upon re-install run an application that will automatically install those packages. This would save greatly on initialisation time (the re-set up afterwards). Essentially, I want to re-install and/or move to another machine and want to the new install to reflect the system as it currently stands.
View 2 Replies View RelatedI have installed Fedora 12 and am running it successfully. I have made a few stupid mistakes a couple of times and have had to start from scratch with a complete OS reinstall on a few occassions. I am happy with my current setup and am wondering is it possible for me to create a Live CD that has my exact configuration so that If I make a mess again, I can just stick in my backup DVD/CD's and roll back to my happy (Known to ne Working) sate. Something like System restore on Windows...... Is this possible?
View 3 Replies View RelatedI would like to create an install cd/dvd from my current Debian Lenny installation.
I guess this will imply all official debian packages will be saved.
As additional nice to have info would be the following:-
How I would capture none standard packages/configurations on the system
i.e. I have additional packages installed I have a customized Apache and Php configuration i.e. config files. Also mysql database is populated forsome applications.
I would like to create an install cd/dvd from my current Debian Lenny installation.
Anybody have any tips as how to do this.
I guess this will imply all official debian packages will be saved.
As additional nice to have info would be the following:-
How I would capture none standard packages/configurations on the system
i.e.
I have additional packages installed
I have a customized Apache and Php configuration i.e. config files.
Also mysql database is populated forsome applications.
I have a laptop with 1 hard drive (80gb)
I currently run CentOS 5.4 and I want to create an image of my current hard drive so that I can play it in a VM Player (VirtualBox).
What utility can I use to create a disk image? Also, Since i'm only using 20gb. I think I want to make a "sparse" file so that the image only takes up about 20gb.
Now... if there is an easier way to do this... let me know. I tried a few tutorials online with no progress. I spent all day yesterday trying to figure this out. Literally, all day.
I was installing yum from the server folder. first i copied the server folder in a folder which was at root then i change the current directory to server and then create a repo by using following command
Server]# rpm ivh createrepo then tab to get the correct name
then ]# createrepo .
]#cd /etc/yum.repos.d/
]# cp -apr rhel_debug_info.repo yum.repo
]# vi yum.repo
[Code]...
how can i completely install the yum so that i can install my necessary packages
I have tried to create a persistent live usb thumb drive using Startup Disk Creator, but have not had any luck. I have tried running Startup Disk Creator from Linux Mint 9 xfce (currently installed on my machine) as well as from live sessions of ubuntu 11.04 Beta1 and xubuntu 11.04 Beta1. When using Startup Disk Creator in Linux Mint, I am able to set the slider to choose how much reserved space I want, but when I reboot, the USB stick does not load, I get an error message about an unknown name in the file. When using the live sessions of ubuntu or xubuntu, the section with the slider to choose how much of the usb stick to devote to the persistence file is greyed out. I get the same result whether I choose the xubuntu iso or the ubuntu iso as the source disc image. I have used the same USB stick and Startup Disk Creator to make persistent live installs before - is there something about 11.04 that does not allow persistence?
View 9 Replies View RelatedI have Lenny installed.Is it possible to create a Live CD/DVD with all settings from this installation to use it on the same Hardware?
View 5 Replies View RelatedI think the title says it all. im installing windows on a virtual system, and I cant capture the mouse into the VM. default is right CTRL.
View 4 Replies View RelatedI was trying to create a new saved state when suddenly Virtual Box broke, Upon starting it back up again I've gotten this error.
[code]...
What all this then?
Is it possible to create a Live CD install of my existing Ubuntu installation? I mean, to create a Live installation CD of my system as it is now on my pc, with all the programs and utilities that I have installed, so that if the system crashes and is unbootable, I could be able to restore it to the state when I created the Live CD.
View 2 Replies View RelatedI was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
I want to try out Fedora using a live USB. I have tried using Ubuntu's Startup Disk Creator but it won't except the Fedora ISO. Is there another program for Linux that could make a live USB?
View 5 Replies View Related