OpenSUSE :: Adding A Repository Via Term?
Apr 13, 2011
I wanted to add a repository so I took the steps of zypper ar -f ((repo directory)) and got:
Code:
zypper ar -f http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.4
If only one argument is used, it must be a URI pointing to a .repo file.
addrepo (ar) [options] <URI> <alias>
addrepo (ar) [options] <file.repo>
[Code].....
View 4 Replies
ADVERTISEMENT
Jun 8, 2010
I'm a Windows admin who does part time Linux server installs. Most of the time I'm asked to deploy a generic Windows server, install a few basic applications and if needed some other applications like Nagios or Zabbix. My question is for long term support, or patching should I be focusing on deploying with repositories to install applications or compile from source? In the Windows world you can patch and update from Windows Update, but is there problems using 3rd party repositories for future updates? Would one of these locations go off line?
View 9 Replies
View Related
Dec 30, 2010
I was using Kbibtex under 11.2 on my Lenovo (32-bit) but YaST does not find it now that I have upgraded to 11.3. Perhaps it is as simple a matter as adding another repository. Can anyone clarify for me?
View 7 Replies
View Related
Feb 7, 2010
I just purchased openSUSE 11.2 x64 on DVD from osdisc.com, as well as the 5 x64 repository DVD's. The base install went fine, but when I try to add thos's to my software repositories using yast they all have the same listed name, "repository" - I can change that to show "repository disk 1" etc, but when I go to install stuff and the software installer asks for "repository disk 1" I put that in the dvd drive, and it cannot recognise it, spits it out and asks for the same disk again...hmmmm. Should I not change the default name that comes up when each DVD is added to the list? If I leave them unchanged will I be told which is the correct disk to insert, remembering that in the list they all have the same name
View 8 Replies
View Related
Sep 22, 2010
If you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
View 7 Replies
View Related
Mar 10, 2011
ok i need to add the repo [URL] to the yum config
i found this but i dont know how to do it for the repo that im using
it says to add this to the /etc/yum.conf file but how do i do it for rpmfusion.org? what do i have to change to the following lines? or is there another way
[dries]
name=Extra Fedora rpms dries - $releasever - $basearch
baseurl=http://apt.sw.be/dries/fedora/linux/$releasever/$basearch/dries
View 1 Replies
View Related
Mar 21, 2011
I have a Fedora 12 and OpenSuse DVD with me. It consists of lots of packages and hence to install these packages I don't have to download them. What I want to do is copy the package folder on my local machine and then add them as repository in Synaptic Packet Manager.
View 1 Replies
View Related
Jul 21, 2010
I'm wondering if anyone is having a similar issue to what I'm experiencing. openSuSE 11.2 was very fast on my system. Since installing openSuSE 11.3, I've been experiencing many short term hangs where I'll lose control of the mouse for a few seconds (usually about 2-5) and the system will do nothing. I don't have unusual load during these time periods and I don't really see any spikes during these periods. If I leave a cpu monitor active, I can see a very very light spike one core0 when it happens, but the mouse and keyboard (and seemingly the whole desktop) hang during this spike so I can't see what's causing it, if that's really the culprit.
I am almost suspecting that I'm experiencing an issue with interrupts... since it seems that everything is hanging for a few seconds, then coming back to life. It does seem to happen more often when I'm resizing or minimizing windows... but that's about all I can say as it also seems pretty random.Here's some basic info on my hardware:ASUS M3A78 Pro motherboardAMD Phenom(tm) 9950 Quad-Core ProcessorGeForce GTX 260G15 Keyboard and MX revolution mouse (just in case USB interrupts turn out to be the issue)So, is anyone else experiencing a similar issue? Maybe we can narrow down what we have in common. Oh, I'm running x86_64.
View 9 Replies
View Related
May 13, 2010
I would like to install a program called VariCAD. I downloaded the install file (full file name: varicad2010-en_2.06_amd64.deb) but was wondering if one couldn't somehow do this via the repository, kind of like I did for my nvidia drivers? Is it possible?
View 6 Replies
View Related
Aug 11, 2011
I was trying to install Gnome 3 in ubuntu 11.04 & some other applications.While adding repositories throgh terminal encountered this error."Error reading https://launchpad.net/api/1.0/~gnome...rchive/gnome3: <urlopen error [Errno -2] Name or service not known>"
View 3 Replies
View Related
Feb 15, 2011
Can I ask if it is possible to add the newest version of rrdtool to CentOS repositories? Now I'm using 1.3.8 but there is already 1.4.5. We have some policy so I'm not able to install it not via repo way...
View 1 Replies
View Related
Jul 14, 2010
Some while ago I decided to add Firefox repository directly through terminal. (Idea born when I saw in one old page (yes, never look for info in old pages ) "tutorial" how to do it.) The whole idea was simple: just add one line in terminal.The line was like this:sudo add-apt-repository ppa:mozillateam/firefox-stableBut since that, when I try to update through update manager I get errors:Quote:
W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D45DF2E8FC91AE7E
W: GPG error: http://archive.canonical.com lucid Release: The following signatures couldn't
[code]....
View 6 Replies
View Related
Sep 3, 2010
Couple of days I go I setup VLC using Kubuntu's graphic software manager, and installed the 3 plug-ins, one of which was related to pulse. After doing this sound stopped working in flash videos. I had read, not sure where, that Kubuntu didn't use pulse (which slipped my mind when setting up VLC).
So I make the mistake of removing everything which had pulse in it's name (again, via the graphic software manager). A message popped-up saying that some packages needed to be removed/edited (a LONG list, a big clue that I was doing something stupid I guess). I let it run it's course and after that it won't boot properly.
If I boot it normally it hangs at the Kubuntu screen with the five dots filling endlessly. If I press F1 it's stuck at "checking battery status."
Recovery mode boots, but the recovery option does nothing.
So I was wondering if I could boot into recovery mode and go into the terminal and add a live USB as a repository for apt, and try to salvage the install?
Or should I admit defeat and reinstall?
View 1 Replies
View Related
Sep 20, 2010
what commands should I need to run on CentOS to add user on tortoisesvn repository browser? any related link out there?
View 2 Replies
View Related
Apr 8, 2011
I tried to install emergent using following guide:[URL](Ubuntu) However, I did not succeed, it seems that it could not install emergent properly. My far worse problem now is that it messed up my software center and update manager. I get following error message when starting the software-center:
Code:
Traceback (most recent call last):
File "/usr/share/software-center/softwarecenter/apt/aptcache.py", line 105, in open
self._cache = apt.Cache(GtkMainIterationProgress())
File "/usr/lib/python2.6/dist-packages/apt/cache.py", line 88, in __init__
[code]....
Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 59 in source list /etc/apt/sources.list (dist parse)'
View 2 Replies
View Related
Jan 24, 2011
I am new to Red Hat Enterprise Linux and now i'm supposed to practice gnuplot especially png. I downloaded 1 gnuplot i saw from internet and i couldn't able to set term to png. I think i'm supposed to run gnuplot 3.7. how to install gnuplot v3.7?
View 1 Replies
View Related
May 16, 2010
I'm using Slackware64-current and everything is fine except by the $TERM variable. When I try to run sbopkg, for example, i get this error message:
Code:
root pedro # sbopkg
tput: No value for $TERM and no -T specified
TERM environment variable not set.
tput: No value for $TERM and no -T specified
[Code]....
View 6 Replies
View Related
Feb 14, 2010
i'v heard it some where and i'm not sure what it mean is it ubuntu without ubuntu-desktop or without some more things?
View 2 Replies
View Related
Oct 10, 2010
I just upgraded to 10.10, I use Tilda (terminal client) on my desktop but now when I type "clear" it says "TERM environment variable not set." instead of clearing the screen. Also commands like "tree" does not show folders and iles in color like they did before upgrading.
View 4 Replies
View Related
Mar 18, 2010
I have several servers , I use the command "screen -R -T vt220" , it is ok to open another session to login , but I found that one server have probelm , even I use the same command , the display screen change , the line changed to question mark (?) , I tried to use vt100 , TERM but still not work ,
View 1 Replies
View Related
Mar 5, 2009
What is the long term support plan for CentOS 5.2 (or indeed 5.3)? We are interested in changing our machines away from Scientific Linux 4.5, because support is ending for that OS within 12 months. So we need to make sure that a new OS choice is going to have support for a number of years.
View 3 Replies
View Related
Feb 25, 2010
I would like to search for a term within a batch of text files and copy the files containing that term to a folder.
I've read the man pages for Grep, Ack-grep and looked through nautilus, dolphin, midnight commander as well as tried beagle, tracker and google desktop (and looked throught these forums).
I can do this function easily with xp's wagging dog in the Windows search, but would like to find a way in Linux.
View 5 Replies
View Related
Oct 20, 2010
I'm looking for a simple text editor which could highlight all occurrences of search term in the opened text file. This is a feature that I particularly like in the Windows Notepad++ editor where any selected word is automatically highlighted in the rest of the document.
View 5 Replies
View Related
Mar 7, 2011
I am trying to search for a term in a bunch of files. Is there a way to do this. I would like to search all the files in a directory and its subdirectories for a specific term.
View 1 Replies
View Related
Jun 14, 2010
What is a difference between TERM, TERMCAP, and TERMINFO? To connect to a linux server from a terminal emulator on a PC, is it necessary to set all 3 variables?
View 1 Replies
View Related
Jan 17, 2010
i have to agree the term of agreement before runing it becase i want to automate my installation with a scripti have already tried "yes | ./myfile " but the problem is the agreement is more than one page and i need to hit space couple of times .. so it's not working .
View 7 Replies
View Related
Aug 3, 2010
I need to set both my font size and my term ($TERM=vt220) from the command for a /usr/bin/terminal. Is there a way for me to do this?
View 2 Replies
View Related
Jan 23, 2011
So what is the term used when your web site is getting spammed from many different ip addresses, hits are minutes apart?
View 14 Replies
View Related
Jun 15, 2011
I ssh connect with a remote machine and have to use emacs.But emacs run only in term-mode. does anyone have a solution how can i run emacs in graph mode in the remote machine
View 1 Replies
View Related
Jan 5, 2011
I want to get the last term of an unknown-sized text line, by usig the awk command. Is there any variable which points to the last term of a text line ? (obviously, y can obtain that term if i knew how many terms does the line have... i.e. awk '{print $12}' ; if we are talking about a 12-terms text line) I wonder if there is an option like $?, to get the last term.
View 2 Replies
View Related