I want to blacklist one module in RHEL 4.5. In RHEL 5.X we can remove the module using modprobe and then blacklist it in the file /etc/modprobe.d/blacklist to make it permanent after reboot. But in RHEL 4.5 there is no such file like /etc/modprobe.d/blacklist. So how to blacklist a module in RHEL 4.5
View 3 RepliesRunning Debian lenny.I want Debian to stop from loading certain kernel module at startup. For now I tried adding "blacklist my_module" line in /etc/modprobe.d/blacklist file with no luck. Also I tried to add line above into some new file in /etc/modprobe.d directory - not working.How do I blacklist kernel module in Debian lenny ?
View 4 Replies View RelatedI tried installing nf_conntrack module in RHEL , it fails
[root@boot]# modprobe nf_conntrack_ipv6
FATAL: Module nf_conntrack_ipv6 not found.
[root@boot]# modprobe nf_conntrack
FATAL: Module nf_conntrack not found.
[root@boot]# lsmod | grep -i nf
nfnetlink_queue 16129 2
nfnetlink 10713 4 nfnetlink_queue,ip_conntrack
[Code]....
i'm using RHEL 5.0 with ext2 or ext3 filesystem, now i wish to use ext4 without loose this Opreating System.... or without using another distro of linux...
View 1 Replies View RelatedI've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a
Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux
[root@hostname-suppressed httpd]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[code]....
The DHCP server on a network I use specifies a DNS server that I do not want to use. Is there a way to continue to use DHCP but to modify the provided information or to "blacklist" one (of the three provided) DNS servers?
The client in question is running Ubuntu 10.04. Networking is managed by NetworkManager but I'm not wedded to that. In fact, I don't like it and wouldn't mind a reason to use something else.
I am trying to add "blacklist ath5k" to the end of the blacklist.config file but it tells me that I don't have permissions to do this. Went to permissions and it says that only the owner can change this. As for owner it says read and write. In ownership it just says user: root and group: root. Very new to this stuff so I am not sure what to do.
View 1 Replies View RelatedI need advice in getting the original blacklist.conf of the directory /etc/modprobe.d/ because I erased and I don't know if that file could make me have some issues in the future, so if any body can lend me a copy of that file or refere me to some page where i can get it. Is for the slackware 13 32bits distro.
View 2 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
can not ping from host (RHEL 6) to RHEL 5 in (virtual)? I have stopped iptables on both machines. But still not able to ping from host machine to virtual.
View 1 Replies View RelatedI am trying to download RHEL 5.4 AS version for testing..But under [URL] There is no specific link for AS version or ES version..How can I detect which iso is for AS and which one for ES..? There are separate links for AS and ES version for RHEL 4.x version but why is it not available for RHEL 5.x versions?
View 3 Replies View Relatedi installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
difference between rhel 5 and rhel 6 - basic difference.
View 3 Replies View Relatedi have old RHEL 3 system which has kernel 2.4 installed into it. I wasnt to upgrade it to RHEL 5.x so i downloaded a kernel 2.6 package but was not able to compile it.
View 1 Replies View RelatedI cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
for the life of me I am unable to get this module not to load
root@milomak-mac:~# cat /etc/modprobe.d/blacklist.conf
# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
[code]....
I have a server setup that is getting repeatedly hit by the same IP address it has tried accessing my vsftp and /drupal/cron.php. For security reason I have disabled vsftpd while I am not using it. The webserver on the other hand I need to leave running.
Code:
- pam_unix Begin -
vsftpd: Unknown Entries:
check pass; user unknown: 2708 Time(s)
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=Administrator rhost=211.161.251.123 : 2282 Time(s)
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=administrator rhost=211.161.251.123 : 426 Time(s)
- pam_unix End -
I would like to be able to add the ip to a blacklist. Additionally I would like to whitelist my own ip when I am working remotely, my remote location doesn't match my reverse dns and my server gives me an error at the end of the day that someone (myself) might be trying to break in. Running Fedora Core 9 in case it matters.
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedI need to add the following line in /etc/modprobe.d/50-blacklist.conf ..
Code:
In order to get wlan working, but I cannot seem to edit the file .
I tried:
Code:
Code:
I also tried manually opening the file but it is read-only . (I did not set my root folder to read-only, however .)
I even wrote a script in /home/exo/.gnome2/nautilus-scripts that should let me open files as root, but nothing works ..
This is my script:
Code:
I need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies View RelatedI am daily getting the same junk / spam email from this sender and I see two IP's in the headers / logs of my Postfix server. I searched my Postfix logs for both IP's:
Code:
[root@mail postfix]# cat /var/log/maillog | grep "67.212.170.242"
Jan 22 05:29:30 mail postfix/smtpd[12205]: connect from civismtp.uas.coop[67.212.170.242]
Jan 22 05:29:30 mail postgrey[2245]: action=pass, reason=client AWL, client_name=civismtp.uas.coop, client_address=67.212.170.242, sender=b.148.1296207.0e628e696f0d17ad@mail.wfmc.org, recipient=carlos@iamghost.com
Jan 22 05:29:30 mail postfix/smtpd[12205]: C00DB77A862: client=civismtp.uas.coop[67.212.170.242]
Jan 22 05:29:31 mail postfix/smtpd[12205]: disconnect from civismtp.uas.coop[67.212.170.242]
Jan 22 05:29:33 mail amavis[2351]: (02351-18) Passed CLEAN, [67.212.170.242] [192.220.23.216] <b.148.1296207.0e628e696f0d17ad@mail.wfmc.org> -> <carlos@iamghost.com>, Message-ID: <20100122095052.183D3192C012@civismtp.uas.coop>, mail_id: eY2CHd1Jva+X, Hits: -3.288, size: 22942, queued_as: 8A54C77A8E9, 2530 ms
How do I block / reject all email from this sender? Is there a specific section in Postfix like sender_access or client_access that I can 'reject' all mail from the above sender. What is the difference between IP's on the logs? I show 192.220.23.216 & 67.212.170.242 but can understand what the two separate IP's are for?
In this example, why does blacklist end up in the file blacklist and $a end up in stdout?
[code]...
The desired result is to have a file containing the results of lsmod which had the first word on the line beginning with snd_ copied into another file preceded by the word blacklist.
Today I moved my Slackware64-current installations to multilib. I blacklisted the gcc and glib packages in the blacklist-file for slackpkg. In the blacklistfile they say:
Code:
# Now we can blacklist using regular expressions.
# This one will blacklist all SBo packages:
#[0-9]+_SBo
I have blacklisted
Code:
...
# The gcc compiler suite:
gcc
gcc-g++
gcc-gfortran
gcc-gnat
gcc-java
gcc-objc
# The GNU libc libraries:
glibc
glibc-i18n
glibc-profile
glibc-solibs
glibc-zoneinfo
glibc-debug
...
How I can use the mentioned regular expressions in order to make blacklisting more efficient?
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
In Fedora 12 how do I make it so a specific program can't talk to the internet?
View 14 Replies View RelatedTrying to stop drivers for realtek nic being picked up so I can do pci passtrhough for these devices to kvm vms later. in 10.04 and 10.10 I did this by appending to blacklist.conf as below, but in 11.04 the drivers are still being loaded. Should I be doing this a different way? or is blacklist misbehaving?
here's end of blacklist.conf:
<pre>
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
[code]....