Fedora :: How To Edit Xorg.conf

Sep 2, 2010

Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.

View 7 Replies


ADVERTISEMENT

Fedora :: How Edit Xorg.conf In Terminal

Aug 13, 2010

What is the command I use to edit the xorg.conf in fedora?

Achieve using the following command:

View 2 Replies View Related

Hardware :: Nvidia GeForce G 105m And Fedora - Edit Xorg.conf?

Jan 16, 2010

i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf

View 4 Replies View Related

Ubuntu :: Unable To Edit Either Fstab Or Xorg.conf

Feb 13, 2010

I am running Ubuntu 9.04 on an Acer Aspire laptop and have broken my display system while trying to use the restricted drivers for the nvidia graphics card.

Basically I downloaded and activated the restricted driver. I rebooted and now ubuntu freezes on startup.

I can get access to the command line but am unable to edit either fstab or xorg.conf because ubuntu has mounted the filesystem in read only mode.

I have read and tried all the options given in this posting [URL] but because I cant read or write any of the files I cant seem to affect any change to the system

View 1 Replies View Related

General :: Big Fonts After Xorg.conf Edit - Slackware 12.2

Mar 9, 2010

After i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]

View 2 Replies View Related

General :: Cannot Edit Xorg.conf To Fix - Input Unsupported - Message

Jul 10, 2011

I am trying to install debian as a DC but on reboot I get the "Input not supported " error. I switched to virtual input and login to try to edit the xorg.conf file but created a new file instead because the xorg.conf file is open by the installation. How do I close it so I can edit it and continue. I am afraid to start a new file as I am not sure what is in the ools one.

View 2 Replies View Related

Ubuntu :: Create A Backup Of The Xorg.conf File - Cannot Stat /etc/X11/xorg.conf

Dec 11, 2010

I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed

[Code]....

View 8 Replies View Related

Hardware :: Xorg.conf Is Replaced With A Default Xorg.conf After Reboot ?

Apr 9, 2010

I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.

But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.

What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.

I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #

View 11 Replies View Related

Slackware :: Difference Between Files (xorg.conf And Xorg.conf-vesa)?

Feb 16, 2011

1. What is the difference between files (xorg.conf and xorg.conf-vesa)

2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from

[Code]...

View 3 Replies View Related

OpenSUSE Install :: Precedence Of Xorg.conf Over Xorg.conf.d?

Jan 26, 2011

I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:

in xorg.conf:

Code:

Section "Device"
Identifier "Device0"
Driver "nvidia"

[code]....

My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?

View 5 Replies View Related

Ubuntu :: Editing Xorg.conf - /etc/x11/xorg.conf Does Not Exist

May 3, 2010

I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.

View 3 Replies View Related

Fedora :: Cant Set Resolution In Xorg.conf?

Feb 3, 2010

While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0

[code]....

View 5 Replies View Related

Hardware :: Getting A Radeon Xorg.conf.d/*.conf Stuff?

May 22, 2011

I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.

Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?

My xrandr command that I use to fix it all is:

xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of

I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.

View 1 Replies View Related

Fedora :: Xorg.conf - Grp - Alt_shift_toggle Not Works

Sep 7, 2009

I'm using FC10 and few WM (Fluxbox, E17, LXDE) this WM's have no spetial application (applet) to set/change keyboard layout.

I edited my xorg.conf:

Quote:

In older release (FC9) with this config and alt+shift combination keyboard layot are changed, but not in FC10

View 6 Replies View Related

Fedora :: Rebuild Xorg.conf From RUNLEVEL 1?

Oct 19, 2009

I tried to install the Catalyst 9.9 driver on Fedora 11 64bit. Only when I was finished with the guide, I read the comments that said it wouldn't work on 2.6.30 kernel.I've written over my old xorg.conf, blacklisted radeon and radeonhd, restarted my machine.When i restarted my machine X wouldn't work ofcourse and all I got is some red coulor in the top of the screen, and no access to terminal via ALT+F2->F6. only way to get access is to add "telinit 1" to the startup line in GRUB

I've tried

Code:

X -configure

and

Code:

system-config-display --reconfig

The first dosen't work and the last dosen't seem to be installed....since i'm on wireless the network has problems to connect....I can pull a cable but not right now.....

I have yet to try:

Code:

[root@fedora ~]$ /usr/share/ati/fglrx-uninstall.sh

View 3 Replies View Related

Fedora Installation :: Xorg.conf For Widescreen LCD TV

Dec 6, 2009

I have just installed Fedora 12 (64 bit), and I'm having troubles getting it working on my widescreen LCD TV. Before I installed the nvidia driver, it worked fine. After I installed the nvidia driver, it showed output on the screen until it gets to the logon screen (I never actually see the logon screen), where it goes black.

I'm assuming this is to do with my xorg.conf file, but I cant for the life of me work out what I need to change. I have been playing with all sorts of options, with no success.

View 4 Replies View Related

Fedora :: Why Does Xorg.conf Get Recreated By Livna

Dec 30, 2009

I am trying to configure an additional input device so I need to edit my xorg file. Any change I make is being lost when I reboot. The xorg gets reverted to seme default configuration. Even if the change is as simple as adding a comment. I have tried disallowing livna to edit the configuration file (using livna display configuration), but when I reboot, the system reverts back to the vesa display drivers.

How can I figure out what is recreating the xorg file? How can I disable this so my changes persist. Or is there another file I can add input devices to (or a way to automatically add them upon boot but before x starts?)

View 1 Replies View Related

Fedora :: Getting Current Xorg.conf Despite It Not Existing

Sep 23, 2010

Now that xorg.conf doesn't exist, how to get a working copy of the xorg.conf that would set it up as it is currently? I tried xorg -configure -retro but that just gives me a black screen.

View 13 Replies View Related

Fedora :: Does Xorg.conf Get A One User Only Version?

Dec 18, 2010

Something bad happens after installing nvidia driver for my fedora 14. It's about the stored driver/xorg configuration, and it only affect on my current account. So I wanna know where can be a one-user-only VGA driver configuration stored. I'll delete it, it's give me a big trouble. Belows are how it become like this, and how the trouble appears. after nv driver installed, I change the /etx/X11/xorg.conf file and start another X with another account without exit current X. Now, everytime when I start gnome with current account, it pop up a message writes

Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 354

[Code]...

And I have to wait for this pop-up message to disappear. During this some 2 minutes, I can't do anything, even Ctr+Alt+F5 to switch terminal fails. I can't PrintScreen neither. I've been uninstalled nv driver twince for this. but right now I decide to fix it.

View 2 Replies View Related

Fedora :: Change Resolution Through Xorg.conf?

Apr 13, 2011

i have a Fedroa12 installed as a VM, and my problem is that i can't change the resolution higher than 800x600 .

i am trying to do that with an Xorg.conf file. here is what i did:

1. telinit 3

2. Xorg -configure (root user)

3. cp /root/xorg.conf.new /etc/X11/xorg.conf

4. inside xorg.conf i have added the following:

under the "screen" section i have added:

DefaultDepth 24 then under the "SubSection" of Depth 24, i have added:

Modes "1680x1050" "1028X768" "800x600"

but then whenever i am try to start the X, it fails with the following message: no screen found...

since i am doing it for studying only, how to configure properly the xorg.conf file ?

View 2 Replies View Related

Red Hat / Fedora :: Xorg.conf Causing On Scientific 5.5?

Apr 5, 2011

I am new to RHEL. I am using a Thinkpad W510 and SL 5.5. I am trying to get everything working smoothly on my system.I am having issues with the gpu drivers and the touchpad, both of which seem to be traced back to xorg.conf.I can set the proper resolution using nvidia-settings, but it resets to 800x600 on restart no matter what I do. I have used the gui to save, I have tried nvidia-xconfig, and I have tried to just editing the xorg myself, but it always goes back.I am having even worse problems with the trackpad. I downloaded and installed the synaptics package, but nothing I do changes the trackpad settings. Mouse properties has no trackpad info in it.

View 9 Replies View Related

Fedora :: How To Lock In Resolution In Xorg.conf

Jan 27, 2010

FC12-x86_64/KDE How can I lock in the 1024x768 resolution in xorg.conf ?

The Option PreferredMode is Ignored , checking in Xorg-0-log.

If I put in Modes "1024x768" it gets changed everytime I reboot.

I'm using the Nvidia driver. Can't use the nouveau driver, the mouse disappears when waking the computer up after about a half hour of sleep, then I have to restart computer to get mouse to reappear.

View 5 Replies View Related

Fedora :: Edit Conf Files In WINE?

Aug 16, 2009

I need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?

View 2 Replies View Related

Fedora :: Edit The Daemon.conf File ?

Jan 17, 2011

My sample rates are out of whack and I need to edit the daemon.conf file.

However if I use

Code:

It will open the file but will not let me edit at all. If I just navigate to it I can edit it, but I can not save it!

I tried going in as root from the terminal and using the code above and I get a weird error.

Something like:

Then it says core dump.

Am I missing something to be able to edit the daemon.conf ?

View 2 Replies View Related

Fedora Hardware :: F12 System Doesn't Like Xorg.conf?

Feb 4, 2010

I just installed Fedora 12. I have an NVidia FX 5200 card. This xorg.conf will work fine (no 3d acceleration, btw):

[Code]...

Now here's the odd part. If I uncomment the Device section and reboot or logout so that X restarts, my screen will not enter graphics mode. It just flashes on and off several times in text mode and finally stops. It's as if it keeps changing modes trying to get happy and never does.

View 3 Replies View Related

Fedora Hardware :: Trackpad - Can't Find Xorg.conf

Feb 28, 2010

I just installed Fedora 12 on a RM (research machines) nBook 4000.

Whilst the trackpad allows me to move the mouse pointer about, it doesn't respond to tapping. Is there anything I can do to get it working properly?

Also, the laptop has an integrated Intel 82852/82855 GM/GME graphics card. How can I tell if it is being detected and working properly? I don't seem to have an xorg.conf file.

View 2 Replies View Related

Fedora Installation :: Can't Find Xorg.conf / Create It?

May 27, 2010

Just have F-13 32 bit installed. But can't find xorg.conf. The screen resolution is only 800x600. The LCD display and the video card can support 1640x1280. Please where can I find a standard xorg.conf. Or how to create it here?

View 14 Replies View Related

Fedora :: Xorg.conf Creation To Change Resolution?

Dec 27, 2010

I run fedora on a server only from command line. I need to change the resolution.

I tried to create a basic xorg.con file with Xorg -configure. But Xorg command does not exist. Which rpm do I need to install?

View 8 Replies View Related

Fedora :: A Tool/utility To Spit Out An Xorg.conf?

Sep 3, 2011

I plugged in an LCD to my x41 thinkpad's VGA port and GNOME was smart enough to add it to my laptop without much prompting. A little fiddling around gave me a large spanned desktop so the cursor can pan from side to side of the two joined screens.I was wondering if I could somehow make my other window managers use this configuration, but there is hardly an xorg.conf, only the things I had in xorg.conf.d. I would like to somehow 'grab' this config and share it across WM's. My second best option would be to grab someone's dualhead xorg.conf for an intel 915GM graphics chip.

View 3 Replies View Related

Fedora Installation :: Import An X11 Xorg.conf File From Debian To Fedora And Have It Work?

Feb 26, 2009

Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved