OpenSUSE :: 11.3 - Keyboard In XEmacs Do Not Operate

Nov 22, 2010

I was experimenting with Emacs and Xemacs - trying to chose between them. Finally I've re-installed Xemacs and find that keyboard in Xemacs don't operate.
I'm using openSuSE 11.3
Emacs 23.1.1
Xemacs 21.59....
Perhaps I should uninstall Emacs?

View 3 Replies


ADVERTISEMENT

OpenSUSE :: Xemacs Broken After Security Update / Fix It?

Mar 20, 2010

I'm running Suse 11.2. Xemacs worked fine until I did a security update yesterday. Now, when I try to open a file, the file doesn't open and at the bottom of the window it says 'Loading this file requires xemacs, (null(function-max-args 'throw))'

View 9 Replies View Related

OpenSUSE Network :: 11.4 New Install, How To Operate Firewall?

May 25, 2011

I have done a new install of 11.4 and as with previous versions, I have to go to YAST2 and disable the firewall before I have internet and local network access. Finally I must find out how to do this correctly.

How to I change the default firewall to allow me internet and local network access without disabling it completely? Also I am unclear about the function of Novel Network Armor? What does this do?

View 9 Replies View Related

OpenSUSE Network :: How To Operate Squid Proxy Server

Mar 27, 2011

I live in Taiwan and sometimes need to travel to Mainland China. How can I use a proxy to allow me access to location sensitive content. Ex: Facebook in China, or Pandora outside of the US?

View 2 Replies View Related

Software :: XEmacs Configuration ?

Nov 18, 2010

When I open a new buffer in XEmacs it places the tab all the way to the left of the toolbar, pushing all the other tabs one space to the right. How can I configure it so that it appends the new tab to the right of all the previous tabs without shifting the previously opened tabs over one.

View 1 Replies View Related

Red Hat :: Cannot Find Emacs Or Xemacs

Jul 21, 2010

I have looked in all the usual places but cannot find emacs or xemacs... Does this mean I have to install it manually??

View 5 Replies View Related

Slackware :: Xemacs - Build Or Install It ?

May 25, 2011

Anybody use xemacs with slackware? If so, how did you build or install it? I've used it in the past with other distros. I briefly tried emacs but because I was used to xemacs, gave up on it.

View 2 Replies View Related

Fedora :: XEmacs Syntax Highlighting Does Not Work

Mar 30, 2011

I have installed FEDORA 14 in my machine. I am not able to have the syntax highlighting in the xemacs. I tried a file.f90 for a FORTRAN 90 program . I tried to flag the syntax highlighting in this buffer without success.
Code:
rpm -q xemacs
xemacs-21.5.29-15.fc14.x86_64

View 2 Replies View Related

Fedora :: Installing Xemacs On Centos 5.4 - Error: X11/bitmaps/gray: No Such File Or Directory

Feb 2, 2010

I am attempting to install Xemacs-21.4.22 on Centos 5.4 and get the following error message when I attempt to... make install

..........
xlwmenu.c:39:28: error: X11/bitmaps/gray: No such file or directory
xlwmenu.c: In function 'XlwMenuInitialize':
xlwmenu.c:3015: error: 'gray_bits' undeclared (first use in this function)
xlwmenu.c:3015: error: (Each undeclared identifier is reported only once
xlwmenu.c:3015: error: for each function it appears in.)
xlwmenu.c:3016: error: 'gray_width' undeclared (first use in this function)
xlwmenu.c:3016: error: 'gray_height' undeclared (first use in this function)
make[1]: *** [xlwmenu.o] Error 1

I understand that there are some X11 bitmaps not included in Centos 5.4 however I have no idea how to install them.

View 6 Replies View Related

Debian :: Cannot Operate Veracrypt

Feb 12, 2016

I am unable to run Veracrypt on Debian 8.3 64 bit. Yet I have applied the installation procedure.

I downloaded the 1.16-veracrypt-setup.tar.bz2 archive and I unpacked in a directory veracrypt I created in my home.

I get 4 files: veracrypt-1.16-console-setup-x64; veracrypt-1.16-console-setup-x86; veracrypt-1.16-setup-gui-x64; veracrypt-1.16-setup-gui-x86

I keep 2 that match my 64-bit architecture, ie: 1.16 veracrypt-console-setup-and-x64-veracrypt 1.16-setup-gui-x64.

I log in as root in the terminal. I slip the veracrypt-1.16-setup-gui-x64 file. Validate the installation choices by default. After completing the installation, I see the icon Veracrypt and when I click on the Veracrypt application does not start.

View 5 Replies View Related

Ubuntu :: Will 10.04 Operate Using Kernel From 9.04

Sep 1, 2011

I've used Jaunty since it came out have been quite happy with it. However, it is no longer supported and I can't access updates. When 9.10 came along, I tried to install it but found my system would randomly freeze. In fact, it randomly freezes with 10.04 as well. I tried Linux Mint's equivalent to Ubuntu's 9.10 and 10.04 and have the same problem. I've visited discussion boards and see that this is a huge problem for many Ubuntu users --- but I've never found a solution that works.

I assume the problem is in the kernel and am interested in seeing if 10.04 will run on that kernel version. My questions are these:

a) Is my conclusion that the source of my problem is the kernel a reasonable conclusion to reach?

b) If the conclusion is reasonable, is it possible to run 10.04 using the same kernel that 9.04 came in?

c) If the answer to C is, "Yes," then is there a tutorial that will walk me through how to install kernels?

View 2 Replies View Related

Software :: When Start Xemacs Is Doesnot Run In An X Window But Runs In A Terminal Window

Feb 7, 2010

Newly installed Debian system from years with Fedora. Ran system update and system got hosed, booted but no Gnome. Got Gnome back after MANY 'aptitude upgrade's. Xemacs disappeared! Along with other things I installed. Tried to install Xemacs but it is broken and will not install, complains about dpkg TOO current(?). So downloaded Xemacs for Xemacs.org and compiled source, installed.

Now when I start Xemacs is does not run in an X window but runs emacs in a terminal window. If I run it from a script, it complains about 'not in tty window'.

My env show:

Code:

The Xemacs install on Debian ( Bug written ) Install and configuration of Xemacs from source. A better understanding of the Debian upgrade process.

View 5 Replies View Related

Hardware :: What Machine Type Operate On

Jan 18, 2011

I need to know what hardware machine underlines my linux. I have machine e.g. IBM X3550 and I need to get this info from linux.

View 4 Replies View Related

Slackware :: Freezes After Certain Screensavers Operate For A While?

Nov 7, 2010

So I've been using Slackware for a long time but I'm not really sure where to start with this bug. Basically I'm on an old P4 Dell system that I just got for free (so semi-old hardware)

Code:
bash-4.1# lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)

[code]...

View 9 Replies View Related

Ubuntu :: Get Windows To Operate On Desktop?

Apr 12, 2011

I cant seem to get Windows to operate on my desktop

View 4 Replies View Related

Ubuntu :: Interactively Operate With Program Using Bash?

Nov 3, 2010

how to interactively operate with program using bash? such as program would ask user to select choice between "a/b/c" and then input enter to confirm? i know i could use

program << EOF
a
EOF

to choise "a", but how to input "enter", so that i could call this program in my script.

View 5 Replies View Related

Ubuntu :: Files Are Corrupted And Will Only Operate Kubuntu ?

Apr 16, 2011

I recently downloaded a copy of Kubuntu from the official website...when i finished downloading it and tried to run it inside windows, my virus scanner immediately picked up several malware inside temp files in my computer called win32 antivirus. I attempted to install kubuntu on my computer on a partition (i've previously done this on other computers no issues) but it had multiple partitions. Instead i tried to do a clean install of kubuntu then attempt to install vista again then. However it is now telling me my files are corrupted and will only operate Kubuntu. This is not what i want, i wanted to operate both on partitions as i haven't completely figured out how to use kubuntu?

View 1 Replies View Related

Ubuntu Multimedia :: Operate Banshee W/ The Terminal?

Jul 4, 2011

what i mean is like type "banshee play Hatsune_Miku" and it plays...... and google yield no results so i brought it here.

View 4 Replies View Related

Installation :: Create A Cd Or Usb To Boot And Operate On A System?

Apr 25, 2010

is there a way to create a cd or usb to boot and operate on a system with just ram and another solid state usb how custom the script??

View 2 Replies View Related

Networking :: Operate Vodafone E220 Modem On FC 13?

Nov 6, 2010

I have installed the 3 following pakages of Fedora 13 ozerocdoff-0.4-1.fc11.i386.rpm usb_modeswitch vodafone-mobile and after that I have given the command

vodafone-mobile-connect-card-driver-for-linux-debug

all I see after that :

vodafone-mobile-connect-card-driver-for-linux-debug
/usr/lib/python2.6/site-packages/twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead

[Code]....

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

View 2 Replies View Related

General :: Operate NTFS Partitions From The OS On The Same Machine?

Jul 15, 2010

i have a window xp////on the same machine i installed linux mint9.....mostly i am using linux mint9.....i want to operate my NTFS (Window XP) Partitions from linux mint9..

View 9 Replies View Related

Software :: How One Mobile And Five Mobiles Operate In UTRAN

Mar 21, 2011

I've installed eurane in ns2.30. I'm trying to simulate how one mobile and five mobiles operate in UTRAN (UMTS). It executes without errors and makes the trace. But when I open the trace.tr files to see the results, I find "LMS_SETUP" messages instead of "UM_Data, AM_Data".I've tried it, but it gives no error. The simulation doesn't give me an error, but the traces are incorrect. The file .tcl for one mobile and five mobiles where made by another person and they work.

View 14 Replies View Related

Ubuntu Servers :: Possible To Operate Web Server 'without' Registering Domain Name

May 14, 2011

I'm wondering if it's possible to operate a Web Server 'without' registering a domain name, using an IP address alone.I currently have Apache & Tomcat running on one of my workstations. I am currently using these servers as development sandboxes; and I have P2P Search Engine 'YaCy' running under Apache, which is accessible from the outside to the entire P2P network.

Since my Apache server is accessible from the outside, I was thinking that I might setup one of my other workstations as a server with just my 'external' IP address & port number as a way of reaching my site, i.e. http:// 255.183.47.201:8090/. I can't see any reason why this wouldn't be possible. I seem to remember several of my former companies doing this on their corporate Intranets. Also, I wouldn't be locked into registering a domain name every year; and I wouldn't have to worry about any content restrictions. If my intended audience knows where to find me; I can't see any reason why this wouldn't work. And, I don't see why my site couldn't be indexed by search-engines. The only caveat I can think of is making sure I have enough bandwidth from my ISP to support the anticipated traffic.If this will work, I assume I can setup a regular website, an online store, podcast, or provide any other type of tradional web-service this way.

View 5 Replies View Related

Programming :: Bash Script That Will Operate On All Files In A Directory?

Jul 22, 2011

I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:

Code:
#ifndef MYFILE_H
#define MYFILE_H

[code]....

View 5 Replies View Related

Programming :: Mbusd Can't Operate With RS-232 / RS-485 Converters With Direction Switching By RTS Pin

Jun 8, 2011

I work with modbus protocol(MODBUS/TCP to MODBUS/RTU gateway server) and write a program for work with mbusd. when working with usb to serial adapter and cable, my program works without any problem. but when working with serial cable does not work (without usb to serial adapter) ; when mbusd is runing and i run minicom program in part initializing modem my program works and when minicom lock the serial port my program stop. when close minicom "with no rest modem" (ctrl+a and press q) modbus program and my program works without any problems.

in builder site (mbus.sourceforge.net) posted : note that currently mbusd can't operate with RS-232/RS-485 converters with direction switching by RTS pin. Use converters with automatic data direction control (i.e. Moxa Transio series).

View 1 Replies View Related

CentOS 5 Networking :: Documents On How To Operate And Configure VPN Server

Apr 12, 2009

i'm looking for any documents or video tutorial for How to Start VPN SERVER on Cent os 5, i'm going to make VPN accounts and set monthly bandwidth on each ,on my Server and let to client's to connect to server via VPN Connetion, such as [URL]...

View 1 Replies View Related

Installation :: Webpages Don't Display Correctly, Flash And Other Plug-ins And Web Scripts Don't Operate?

Nov 4, 2010

installing a Linux distro on an old mac to make a simple desktop home computer details below.The Scenario: I am trying to breath a couple more years of life into a computer illiterate friend's Mac G4 [POS] computer, it is a paper weight but all he needs is a basic desktop and an web machine and he can't be made to buy a new one unless all other options are exhausted.

The computer: Is a Mac G4 power-PC architecture, 450 MHz, 18 GB HDD, 1024 Mb ram ugly little thing that was gotten for free it currently has mac OS 10.2 [unsupported] and newer OS-X (he is more familiarized with Mac) don't run on power-PC. Currently web pages don't display correctly, flash and other plug-ins and web scripts don't operate and it is very clunky with software bloat.

My solution? Is to install Linux so he can have a trim clean operating system. Ubuntu 10.04 [community ppc variant] runs off a live CD but is dead slow on account of the low processor power and I was unable to get gnash to run flash video a necessity as Adobe has abandoned power-PC, I suspect the gnash error is between chair and keyboard, advice is welcome. I would like to install a distro more suited to this system currently I am looking at mintPPC but can't quite follow the installation instructions what is meant by Debian squeeze the download link gives me a mini.iso is this the same thing? Also clarification on the terminal commands would be of help. Advice on a different distro is also welcome preferably one with an all in one installing process rather than the mint, Debian, Ubuntu multi-part thingy that mintPPC is; it just needs to be power PC compatible and able to run on a few hundred MHz maybe there is an easy way to put LXDE or Xcfe on a more popular Disto? As for me: I am a new Linux convert, discovering the glory this past July and am still learning my way around I am computer literate and somewhat savvy but I am not a tech head and I HATE working on them I can and do it but I don't like it and I am often hampered by ignorance of the latest new/trends and an acute allergy to Macs and Apple products in general.

View 2 Replies View Related

Fedora :: Updating The Installed To Include And Operate With AHCI Mode Drives?

Dec 15, 2010

I have successfully installed a dual boot system with Fedora 14 on drive sdb and WIN7 on drive sda, with Fedora 14 being the major (default) OS. The system is an AM3 with a quad core CPU and all SATA drives. The drives are set to IDE mode, and I am wondering:-

1. What are the benefits of AHCI - will it improve the speed and responsiveness of my system? And

2. If it is worth installing, do I have to do a complete re-install of the OS, or is there some way of updating the installed Fedora to include and operate with AHCI mode drives?

I'm quite happy with the system as it is now, but if there is a way to squeeze extra speed out of it I'm willing to give it a go. And never having been involved with SATA drives and Linux previously, I'm completely ignorant on the subject.

View 2 Replies View Related

OpenSUSE :: International Keyboard Switching Is Missing In KDE Opensuse 11.4 X86_64?

Aug 10, 2011

on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...

View 2 Replies View Related

OpenSUSE Hardware :: Mute Using Keyboard Shortcut But Not Unmute On Opensuse 11.2?

Mar 11, 2010

I recently installed Opensuse 11.2 on my Acer 3680 laptop. One problem I have notice is that while I can mute my volume control using the keyboard shortcuts, I cannot unmute it using the keyboard short cut. When I press the keyboard shortcut, which is maped to XF86audiomute, it display the popup indicating that the control is unmute, the control is not really unmute. I can unmute it by using the volumen control in the system tray.

I am puzzled, this did not happen under Fedora 12 nor Linux Mint 8 / Ubuntu 9.10. What could be the cause of the issue and what can I do to locate the source of the problem?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved