When I open a new buffer in XEmacs it places the tab all the way to the left of the toolbar, pushing all the other tabs one space to the right. How can I configure it so that it appends the new tab to the right of all the previous tabs without shifting the previously opened tabs over one.
View 1 Replies
I have looked in all the usual places but cannot find emacs or xemacs... Does this mean I have to install it manually??
View 5 Replies View RelatedI was experimenting with Emacs and Xemacs - trying to chose between them. Finally I've re-installed Xemacs and find that keyboard in Xemacs don't operate.
I'm using openSuSE 11.3
Emacs 23.1.1
Xemacs 21.59....
Perhaps I should uninstall Emacs?
Anybody use xemacs with slackware? If so, how did you build or install it? I've used it in the past with other distros. I briefly tried emacs but because I was used to xemacs, gave up on it.
View 2 Replies View RelatedI have installed FEDORA 14 in my machine. I am not able to have the syntax highlighting in the xemacs. I tried a file.f90 for a FORTRAN 90 program . I tried to flag the syntax highlighting in this buffer without success.
Code:
rpm -q xemacs
xemacs-21.5.29-15.fc14.x86_64
I'm running Suse 11.2. Xemacs worked fine until I did a security update yesterday. Now, when I try to open a file, the file doesn't open and at the bottom of the window it says 'Loading this file requires xemacs, (null(function-max-args 'throw))'
View 9 Replies View RelatedI am attempting to install Xemacs-21.4.22 on Centos 5.4 and get the following error message when I attempt to... make install
..........
xlwmenu.c:39:28: error: X11/bitmaps/gray: No such file or directory
xlwmenu.c: In function 'XlwMenuInitialize':
xlwmenu.c:3015: error: 'gray_bits' undeclared (first use in this function)
xlwmenu.c:3015: error: (Each undeclared identifier is reported only once
xlwmenu.c:3015: error: for each function it appears in.)
xlwmenu.c:3016: error: 'gray_width' undeclared (first use in this function)
xlwmenu.c:3016: error: 'gray_height' undeclared (first use in this function)
make[1]: *** [xlwmenu.o] Error 1
I understand that there are some X11 bitmaps not included in Centos 5.4 however I have no idea how to install them.
Newly installed Debian system from years with Fedora. Ran system update and system got hosed, booted but no Gnome. Got Gnome back after MANY 'aptitude upgrade's. Xemacs disappeared! Along with other things I installed. Tried to install Xemacs but it is broken and will not install, complains about dpkg TOO current(?). So downloaded Xemacs for Xemacs.org and compiled source, installed.
Now when I start Xemacs is does not run in an X window but runs emacs in a terminal window. If I run it from a script, it complains about 'not in tty window'.
My env show:
Code:
The Xemacs install on Debian ( Bug written ) Install and configuration of Xemacs from source. A better understanding of the Debian upgrade process.
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I am using Centos 5. I got one error unexpectedly after some configuration for rsync and folder settings. The error i am getting is "Serve Authorization directory (daemon/ServAuthDir) is set to /var/gdm but does not exist. Please correct the configuration and restart GDM." after rebooting.
I tried to resolve the issue by setting permission for folder /var/gdm to 755. but the problem is still not resolved.
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedWhen I enable UFW Configuration, in a programme called Firewall Configuration, runs along with the System. Now, I configured it such that it can run along with the Session. Now, Ubuntu is already secure. So, is there any need for additional Firewall like this? (ufw is already present in Ubuntu, and this only Configures it). And, is it required to have it enabled always for keeping the Firefox running? (Because It may consume System Resources). Or, is there any other firewall that consumes less System resources or runs at the Background?
View 1 Replies View RelatedI want to see what is the configuration of my Wind River Linux (actually I want to see what modules are installed in it when it was built). I can't find the configuration file.
View 14 Replies View RelatedI use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies View RelatedI am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies View RelatedTo configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
I have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
I have a slow machine, mainly a Celeron with 250gb HD.This machine is not being used, so I was planning to install a Linux distro and create a bunch of VMs for development.Which distro should I choose? I plan to use this machine mainly as a small "hypervisor" to other vms.Is it possible? What do you suggest? (Buying another machine is out of question, since I would like to know if it's possible give a purpose like this to the Celeron)
View 4 Replies View Related I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies View RelatedI recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
How to change repository via terminal i install my debian trhough debian cd 1 so if i type apt-get upgrade the source is always fromd cd 1 and i want change ther source to the another repository(via internet not cd)
View 8 Replies View Related
