Networking :: Vnc To Windows Not Working
Feb 27, 2011
I have a simple home network consisting of 2 laptops - one is a linux box and the other runs windows and linux with a dual boot setup. I have tight vnc server running on both machines so that I can look inside one machine from another. I can successfully use the Remote desktop viewer (Ubuntu) to access the linux OS of the other machine. However I cannot access the same machine when it booted into windows the windows OS does not seem accessible at all using tight vnc FROM a linux box.
View 2 Replies
ADVERTISEMENT
Jun 4, 2010
I have been using Ubuntu for a while now and have never run into something like this that I haven't been able to find on the forums. My problem is quite similar to this post [URL]
Description:
I have a Windows 7 x64 machine and a Ubuntu 10.04 Server machine. I also have a share called "stuff" on the Windows machine. I can run the following command and it mounts the share successfully :
Code:
sudo mount -t cifs //windows_machine/stuff -o user=usr,password=pswd /path/local/folder
However, if I run smbclient it fails with this error
Quote:
session setup failed: SUCCESS - 0
[Code].....
View 6 Replies
View Related
Feb 20, 2011
I want to tunnel X apps to windows with PuTTY. I have the following in my sshd_config:
Code:
X11Forwarding yes
X11DisplayOffset 10
[code]....
View 4 Replies
View Related
Aug 8, 2010
Our company uses a customized vpnc (based on and almost the same as vpnc 0.5.3). I first tested it on a Windows host under Virtualbox everything works straight away. But when I want to use it on a Linux host directly it always ends in "No response from target". I have tested this on Fedora 12 and the latest Ubuntu.
I thought of firewall settings but iptables -L on Ubuntu returns an empty list even.
View 2 Replies
View Related
Apr 13, 2011
I have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers. Internet connection is not working on any of the windows computers.
I have eth1 set to "shared to other computers" under the IPv4 settings
View 2 Replies
View Related
Sep 7, 2009
When I log in to linx and connect to my University's public wifi, it disconnects or if it stays connected, I cannot ping anything or load any webpages. But when loggod in to windows I can write this message now. Signal strength is 28% Can anything be done to still use wifi in linux and not have to log in to windows?
View 3 Replies
View Related
Dec 10, 2010
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
View 1 Replies
View Related
Sep 18, 2010
I enabled the windows preview effect from CCSM but it seems to be working only for the open windows. For the windows that I have minimized, no preview is shown when I hover over them in taskbar
Is this an expected behaviour ?? Can I change it to be shown for all sorts of windows irrespective of open/closed states ??
View 1 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Jul 17, 2009
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies
View Related
Jun 21, 2010
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies
View Related
Nov 17, 2010
I have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
View 9 Replies
View Related
Jul 25, 2011
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
View 3 Replies
View Related
Jul 18, 2011
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
View 9 Replies
View Related
Dec 22, 2010
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies
View Related
Aug 28, 2010
OK so I set up a server yesterday and got ndiswrapper loaded on it with the appropriate driver, I edited the /etc/network/interfaces file to contact my router with it's MAC address, WEP Key, etc... So the problem is I can ping addresses like Google and Ubuntu Forums but I can't use apt-get to install or update packages. When I try sudo apt-get update I get a whole bunch of Code: W: Failed to fetch <address>Temporary Failure resolving <address>My Wireless interface is wlan0 and also I can ping my server from my other computer running Linux and my server can ping that computer too.
View 1 Replies
View Related
Jul 20, 2011
I recently updated to Fedora 15 and I'm using Gnome 3. Unfortunately, the windows key is not working. Pressing it does not activate and response.
View 1 Replies
View Related
Jan 15, 2011
My Windows XP PC crashed and died. I tried to restore it, but it asks for a system file I don't have. I thought I could start up with the Linux0S2007 CD, but it doesn't seem to recognize the CD drive either. Is there a code or keyboard entry I could use to run my PC off of the Linux CD without Windows working? I have not installed Linux on this PC.
View 12 Replies
View Related
Mar 14, 2011
i have ubuntu 10.04 on my laptop and whenever i press WINDOWS+TAB the applications sit on a glass like platform (kinda like the itunes album library). I've now installed ubuntu on my desktop pc but that feature isn't working ... what's it's name? How do i get it to work?
View 2 Replies
View Related
Mar 30, 2011
I can't use cd-rw's or dvd-rw's that was previously burned in Windows. I have a lot of them that I still have from my Windows days and want to re-use them. But my Ubuntu can't delete the rw's so that I can use them again. I tried both Brasero and K3b. Both I just get "erase failed". It happens on both my desktop pc and my laptop. Is there a way or and app that will be able to erase these rw's that I can re-use them with Ubuntu ?
View 9 Replies
View Related
May 5, 2011
I'm using 11.04 with Gnome 3 and it seems I can't change windows by using alt+tab. Is this a bug or a feature?
View 4 Replies
View Related
May 2, 2010
I was using before in dual-boot both Win7 and Ubuntu9.10. I've upgraded yesterday Ubuntu to v. 10.04 and since then a strange thing happened. My (wired) network works fine under Ubuntu. Internet connection is all right, download speeds seem normal,etc. I booted back into Win, and it informed me that my cable is not plugged in. Very weird, because in Ubuntu I had no problems. I disabled the device, rebooted, Windows re-installed the driver for me, but still, the same problem. As I was planning to do it, I even re-installed Win, but STILL, the same problem.
So now, I'm in the strange situation that I have internet connection under Ubuntu and a "please plug in your cable" message under Windows.
View 5 Replies
View Related
Jan 11, 2011
i downloaded some "flash video (video/x-flv)" files from videos.i wait for the videos video to finish buffering then i click on places -> computer -> file system -> tmp...then i copy-paste that video and rename it on another folder that i want the video to be in.then i put all the videos that i saved on a memory stick and gave it to the person who needed them videos
he phoned me telling me that the files videos wouldn't open on his computer (windows xp)is there a way to convert these videos into known video formats that work both on linux and microsoft windows?
View 1 Replies
View Related
May 1, 2011
I have recently upgraded to 11.04 and everything works except for compiz and emerald, every time I enable compiz to be the window manager the borders either do not work or they do not appear. I switched the window manager to metacity and now the borders work but I can not get any effects at all. Also emerald never replaced the window borders either.
View 5 Replies
View Related
May 9, 2011
I somehow managed to screw up my 'switch between windows shortcut' when changing the settings for compiz. Now I cannot get it to work at all, despite trying to solutions on this and other forums. I removed compiz with the software center and my alt-tab shortcut still didn't work--although it IS enabled and set correctly in the System Settings > Keyboard Shortcuts menu. I reset the alt-tab combo so something else (alt-space, which works for its normal setting of bringing down the window's dropdown menu) but it still did not work to switch between windows.
View 3 Replies
View Related
May 23, 2011
I've been using ubuntu for a while now and until recently it's been bee's knees but ever since i upgraded to the latest version, copying files downloaded on ubuntu to windows 7 doesnt work, i.e. the files just don't show up on windows although until i updated the system, it was all perfect.
View 1 Replies
View Related
Jul 15, 2011
I have an Acer Aspire One D255E netbook dual-booting Win7 and Kubuntu Natty, and basically the inbuilt microphone works in Windows but not in Kubuntu. I've tried running alsamixer, it's not muted. I installed pavucontrol and under input devices there are 2 options: Analogue Input and Analogue Microphone. Both of them show the volume level hovering round about nothing. But slightly above, so I dunno, noise I guess.
View 9 Replies
View Related
Apr 8, 2011
I have Nagios working and the check_logfiles plugin installed on my Ubuntu box and NSClient ++ installed on my windows box. My end goal is to be able to get the check_logfiles plugin to flag certain words in Windows Log Files. I can call the check_logfiles from the Ubuntu command line and it works fine when I look at a local log file on the Nagios box. If I try to do something similar but point to a remote windows file the process fails. I have NRPE enabled and I think working on the Windows machine. Before I post Config files etc can someone tell me if my approach is correct? Should I be calling the check_logfiles plugin from the Nagios box or do I need to install the Windows version of Check_logfiles on the remote machine and then make some sort of reference to it in the NSC.ini file on the Windows box.
View 1 Replies
View Related
Sep 19, 2010
I'm trying to minimize windows from the CLI (not tied to Gnome/KDE). wmctrl mentions it can set a `hidden' option for windows but this doesn't seem to work. Also found this: [URL]
View 2 Replies
View Related
Jan 23, 2010
I am trying Linux with the mint cd rom install. I have two hard drives and bootit ng on hdo, with windows xp. I installed mint the first time on hd1 using the install cd. When I booted up I could run the linux but not the windows. I reinstalled bootit ng but had not luck. I reinstalled Linux again and this time tried to get it to install grub on a certain partition but still no luck. I reinstalled it again and this time disconnected hd0 and it worked again and I could run the linux with no problem. But when I connect hd0 I can boot windows but not linux. Bootit sees the other hard drive and can see all the partitions on it but every time I try to boot it just says the partition is not bootable.
I have fiddled with various settings and tried setting the embr and hard drive swap but nothing works. Bootit web site had some help pages that said to run grub from a bootable cd and then type grub> find /boot/grub/stage1. I have tried this but always get error code 15 file not found. grub> find /grub/stage1 same thing I install mint using the following partitions. /boot is about 300 megs. / is about 3 gigs and /home is 8 gigs and /swap is 1 gig. I feel that if some knew bootit ng then they could tell me what to do in five minutes. The hard drive is there and recognized and the partitions are there the system works but I just can not boot to it with out disconnecting the one hard drive
View 6 Replies
View Related
