I have Linux mail server, It always encounter this problem, when i shut down or restart the server. You cannot receive mail but you can send..i use the following services:
iptables -F
service iptables restart
service sendmail restart
[code]...
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
Every time I try to send a message with SquirrelMail, I get:
Code:
Message not sent. Server replied: Syntax error in parameters or arguments 501 5.1.7 Bad sender address syntax
I want to configure a single mail server to send and receive mail from multiple sub domains of my domain. I've already installed Postfix/Dovecot and it is perfectly working for mydomain.com. And also installed roundcube for Web Mail. Can I further customize this setup to process mail to sub domains? ex- someone@subdomain1.mydomain.com, someone@subdomain2.mydomain.com, someone2@subdomain1.mydomain.com (someone@subdomain1.mydomain.com and someone@subdomain2.mydomain.com are 2 separate users. they should be able to log on to web interface separately)
Currently i use system account names as email user names. (ex - systemusername@mydomain.com). The only MX record in my domain DNS pointed to current server (mailhost.mydomain.com). I read about postfix virtual domains. but couldnt figure out how to use it to achive my target. I do not need configuration details. Just explain me the way to do it. I can do the rest my self.
i'm using fedora 12 and i wanna send mail using command $mail actually i tried to send mail to my gmail , yahoo ,and hotmail emails but i didn't receive the mail so i expect that i should have some configuration on my host before sending mai
View 2 Replies View Relatedi basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
Regarding few things I am facing problem :
1. How to send one copy of that outgoing mail generated from the source. It should cc to another mail id in server's backend while mail sending.
2. I don't have any domain - internally or externally. Only have static ip, accessible from outside. Can I configure sendmail to send-receive through that ip.
3. How to transfer all mails and addressbook from exchange server to linux sendmail server.
I was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
so I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...
My server already installed and works well, but I can't send or receive mail with Squirrelmail, the error that appears is: Server replied: 67 Can not execute command '/ usr / sbin / sendmail-t-i-fteste@gabinetedeengenharia.com '.
View 5 Replies View RelatedI recently purchased a domain and I have setup what I believe are correct dns records from the domain companies control panel. I have the domain pointing to my server and that's working fine. I also have an MX record for my domain. Now, I can send emails from my email account just fine however I cannot receive any emails coming in to my account. Heres an example:
[dalton@int-interactive mail]$ echo "hello world" | sendmail -v dalton@int-interactive.com
dalton@int-interactive.com... Connecting to [127.0.0.1] via relay...
220 int-interactive.com ESMTP Sendmail 8.13.8/8.13.8; Sun, 21 Aug 2011 14:45:16 -0400
[code]...
Using Ubuntu 11 and have just managed to get wireless working. It used to be a wired connection but when I moved needed to go wireless. Now for some reason the send/receive icon is faded and I can send or receive messages.
View 2 Replies View Relatednstalled Postfix + Dovecot + Roundcube on a plain CentOS 5.5 box, let say on "site.com".I cant send or receive emails. When I try to telnet from both localhost and from the outside world, it can not reach the mail server.Testing itself on port 25:
Code:
[root@srv-estudio:~]telnet mail.site.com 25
Trying 200.40.xx.xx..
[code]...
In my continuing quest to live without X most of the time, I am trying to set up fetchmail and Mutt to get and send mail. I only want to be able to send and receive text based mail, and so far I am running into trouble with what I think should be pretty simple. For receiving my mail, I believe I only need to create a .fetchmailrc file in my home directory with the entry:
Code: poll [URL] protocol pop3 username "myusername" password "mypassword" But I get:
2 messages for myusername at mail.myISP.com (7965 octets).
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from wetumpka@mail.btopenworld.com and delivering to SMTP host localhost
reading message myusername@pop-smtp.ISP.mail.fy5.b.yahoo.com:1 of 2 (2734 octets)fetchmail: Query status=10 (SMTP)
It appears to me that it is finding mail but does not know where to deliver it and is refused a connection to my machine. Also, I cannot figure out how to set up my SMTP for my ISP in Mutt to send mail. Can someone point me to a simple tutuorial on how to do these things. I really only want to do what you would with Thunderbird, but from the command line.
home web server (running on port 21333). i'm running fedora 10 w/ LAMP and I can't get my php contact form on my website to send out mail. it looks like it sends but it doesn't (and I know the form works because it's the same one from my hosted web server). I've tried everything I can think of, disabled selinux, added apache to trusted mail users, changed the port to 2025 in case comcast blocks 25 (at least i think i did), added the port to the iptables and i have no idea where to go from here.
View 4 Replies View Relatedmy user are not able to send mail, in my mail server this error is showing ,
[root@aloha ~]# service MailScanner restart
Shutting down MailScanner daemons:
MailScanner: [ OK ]
incoming sendmail: [ OK ]
[Code]....
Im using fedora 7 , i dono which all services has started .
I have installed a sendmail server on fedora 10
I try to configure my sendmail server as a mail server to send outgoing email using port 587( because port 25 is blocked). after finishing configuring my sendmail server, i checked out my sendmail server using telnet localhost 587, and it worked fine as below code...
I have tried two different ways for user name: name, or name@mail.mydomian.com, but not working at all, the two results are the same.
PS: I have test port 587 and can use port 587 and Kmail to send outgoing mail using other external relay server
is my wrong configuration for sendmail server or kmail?
We host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies View RelatedI have added a ubuntu 9.10 desktop machine to a windows domain, I can log on to the ubuntu machine using domain user accounts and passwordds, now I want to configure the linux machine to connect to the MS exchange server 2003 in the domain to send receive emails. How can I do this? I tried installing thunderbird but it doesnt give an option for SMTP or ms exchange server in the mail settings.
View 3 Replies View RelatedI am connected to the internet with a Rogers Rocket Stick, when I want to check my mail in Evolution the "send and receive" tab is not highlighted. It was working yesterday when I was connected through wireless why is that and how do I fix it ?
I installed Ubunto remix on a Netbook but I can not connect my Laptop with ubuntu to my Netbook with ubuntu, both these computers are connected on the network, it asked for the password to be able to connect on both computers but I cant get the two to communicate with each other .... yesterday when I still had windows xp on my Netbook I had no problem connecting the two computers ...
I used this tutorial to setup to setup iSpconfig postfix courier: [URL] but i cannot send or receive email:
[Code]....
Basically when i create users in ISPconfig, something goes wrong, mysql is running and i have postfix-mysql installed and running too.
[Code]...
I do not know why I could send email outside but not receive. I use relay to my ISP that port 25 is blocked by my ISP. What can I doing with configuration when it should be works to receive mail? Okay, I have sent a test e-mail between localhost and it works. I can send from mailserver to my gmail without problem. So why I cannot receive email from gmail?
View 2 Replies View RelatedI want to setup an email client in order to send/receive emails, but since i am experiencing some issues with my ISP, i decided to setup an SMTP server with Postfix on my machine.The problem is that i can receive emails but i can not send.I read almost every thread in here refering to Postfix, but i could not find the problem on my configuration.So here it is..
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
[code]....
I hope someone can help me setting up receiving e-mail on my home server. Ubuntu Lucid and Zarafa from repository. Zarafa is running well. I can send e-mail via the relay smtp host from my ISP. But though the e-mail address should be correct I never see this e-mail appear in zarafa inbox.The e-mail reaches the server via an open 25 port forwarded to my server, but it seems postfix does not know how to handle it. Or is there something else going wrong here? Below are my settings. These are the settings I added or edited. the rest is Ubuntu Lucid (10.04) standard.
/etc/postfix/main.cf
Code:
myhostname = xxxx.dyndns.org
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
[Code]...
Alright guys, I've looked over every thread regarding this issue on this forum, and many others; yet I cannot find out why my mail is being bounced without error from my external gmail account.From what I've seen, you guys need to start off by seeing my postconf -n
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]...
It is the strangest thing. I can not receive emails on this server after it has been up for an hour. I noticed that everytime and email is received that a sshd opens but never closes. Causeing a memory issue that I dont know how to fix. Also the mailq grows and grows. Mostly with email stating the recipient and send are both [URL].. also postmaster@mail.jmchd.com shows mail system configuration error. I have to restart the server every 30 minutes so users can get and send emails. This is horrible because for every 5 minutes out of the hour emails are bouncing.i have looked through them but I know not what I am looking at.
PS. I was thrown into the position and have limited knowledge. I am used to a GUI.
I handle several hundreds of domains. Mails are handled with google apps (but previously I used to have a full postfix/courrier setup with virtualhosting). Now what I need is to be able to send mail (newsletter etc...) from my web servers, but I don't need to receive mail on these servers.
View 4 Replies View RelatedHow I can send and receive SMS via CDMA Connection. I have tried Gammu (hangs) and Gnome-Phone-Manager (Can't run on GTK3). Gnokii? Well ... I'd like to hear from someone who has succeeded with it on F14. I don't like having to boot into Windows to check my Phone Credits
View 11 Replies View RelatedI have setup a mail server on my remote Ubuntu 10.04 server using postfix.
Using Putty to SSH to the server, I can send mail, check mail, and the server accepts mail from other domains (gmail, yahoo, hotmail etc).
However, I cannot seem to send mail using PHP functions.
I have created a "test.php" file with the following contents:
[Code].....
When I run the .php file, nothing happens, and nothing logs in the mail logs, so I'm sure the server doesnt understand the mail command in PHP files, but I'm not sure how to go about fixing it.
Apache2, PHP5, postfix, and the additional necessaries are installed (this is a webserver/mailserver on 1 box)