Networking :: Breaks In Fedora - No Internet
Oct 21, 2010
Another weird one I think. I have two integrated LAN's on the MB. All was OK in Windows and figured I'd do some work in Fedora 13. When I got there I had no internet. I messed around trying to get it working and gave up; went into Ubuntu; same deal. I booted Windows and the same; no network. I tried the other integrated connection and it worked. No way could I get the other nic to work so I tried shutting right down; pulled the plug; waited a few seconds; plugged it back and booted up and it's working again. Now I'm leery about going into Fedora. Anyone else have this problem. I think it happened to me once bofore and I thought my nic had bit the dust and plugged into the other connection?
View 2 Replies
ADVERTISEMENT
Nov 25, 2010
I have installed Ubuntu 64 10.04 server. I have two nics and have set them up to both be static with their own IP with the correct gateway, network, broadcast, subnet and dns-nameserver. When I have both enabled, I can ping local pc's but I can't ping Internet sites like Google nor can I get out to the Internet with apt-get or Lynx.
If I disable one, then I am able to get out to the Internet. All my configs look good, and it does not matter which one I disable, just so long as there is only one NIC on, everything is good.
View 1 Replies
View Related
Mar 17, 2010
Latest FC12 update included dhclient-4.1.1-9.fc12 which fails to configure eth0 after restarting the computer. Had to remove/downgrade to 4.1.0* (and reinstall dracut and NetworkManager(-glib)). There is no config file in /etc/dhcp/dhclient.d so I don't know how to reset dhcp/eth0 to connect. Thought some one smarter than me might have noticed this by now and worked out a solution. Can't tell that anything in Bugzilla sounds like my problem. Might only be x86_64 or KDE-4.4 problem as my 32-bit Gnome install is not affected. Easy enough to grab the rpms, just annoying. Still haven't learned how to keep a package at version x.x with Fedora yet but that's another topic.
View 3 Replies
View Related
Nov 4, 2010
I'm not sure what changed but when I recently upgraded via yum to Kernel 2.6.34 none of my uPnP or DLNA apps show up on my tvs (Sony TV and PS3). Booting an older version, i.e. 2.6.33 solves the problem with no other changes. I use MediaTomb, MythTV uPNP server and Serviio. All work fine except with the newest kernel.
View 8 Replies
View Related
Apr 1, 2010
kernel-2.6.32.10-90.fc12 seems to break 802.11n with my intel 4965 chip on my thinkpad t61p. Anyone else seeing the same thing? iwconfig shows extremely low bit rate. dmesg doesn't show anything at all unusual.
View 10 Replies
View Related
Aug 9, 2010
I ve been a loyal fan of RedHat Linux for last 5 years.I switched to Ubuntu just few days back.Let me tell you, I ve already started loving it.However I m facing few issues while downloading from the Net.While downloading some softwares from the net using 'Package Manager' or 'BitTorrent Client' or directly through Firefox, I m getting the following error if my computer remains Idle for around 20-30 minutes.Error Says, Check your internet Connectivity'.I then need to Redial to connect to Internet.I never faced this issue in RedHat or Windows.I use to put my machine to download for the entire night and never faced connectivity problem.Where as if the computer is not idle and I m hitting keyboard keys, the download happens smoothly.It seems like some thread is checking my status. and if my status is Idle its disconnecting the net
View 2 Replies
View Related
Feb 27, 2010
I'm having a problem where the wired network wired network (eth0) disconnects when the connection is idle for a while (usually tens of minutes). It works fine every time I boot up, but eventually it dies, and I can't ping the machine, or ping anything from the machine. ifconfig shows that it still has an IP address. Running ifdown/ifup causes it to work again. I intend for this machine to be a server, so I can't afford to go restart it when I need network access. sudo lshw -class network gives me this:
[Code]...
View 4 Replies
View Related
Feb 24, 2010
I am not fully sure if this belongs more to the networking section or the software. O hope it is related to here enough.
My problem is as the topic says.
My port 80 seems to be already taken. lighttpd fails to start reporting that it cannot bind to port cause its already taken.
The error message itself:
Code:
"Starting web server: lighttpd2010-02-21 07:01:02: (network.c.345) can't bind to port: :: 80 Address already in use failed!"
I am not able to crack this by myself. Ihve tried investigating this by
Code:
lsof -i :80
netstat -ape | grep -v unix
First doesn't show anything second anything abt port 80.
Now hints I can think of. Maybe you have more experience and ideas what I can do and where should I look for the culprit.
I am using debian (unstable) and lighttpd. I even tried rebooting; it says that the port is taken already at the boot sequence (well it starts pretty much at end anyway but the system should be clean).
It seems that it started failing after a major distro update, so maybe there are some conflicts based on ipv6/v4 or something, though I have no idea what it could be. Well my hit for that is the part of error msg "bind to port: :: 80 ". This "::" looks like ipv6 naming convention. Maybe its lighttpd internal.
View 2 Replies
View Related
Dec 3, 2010
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies
View Related
May 16, 2011
I was browsing the available packages to install the weather indicator and noticed that a network indicator was available. apt-get said that it needed to install 'connman' and remove 'network-manager' and 'network-manager-gnome' in order to install the network indicator. I foolishly assumed it knew what it was doing so I went ahead and performed the installation/removal and restarted the computer.
Now I cannot connect to the internet. I only have an ethernet card for connection to the internet, no wireless or otherwise. The configuration I use is not DHCP, but a manual settings of address/subnet/gateway and name servers
When I try to set the network values through the network indicator some of them do not stay set. The gateway value appears to be set, but then after closing down the indicator window completely it comes up with the value 'Modified'. The DNS servers is the only other value that does not stay set, but it only changes to be blank. The connection never works.
So, I downloaded 'network-manager' and 'network-manager-gnome' on another computer, transferred the packages by USB, and reinstalled them (uninstalling connman and the network indicator). But the network connection remains broken. At least with 'network-manager-gnome' the values I set stay set, they just don't work anymore. I've tried editing /etc/network/interfaces to previously working values directly, but they do not seem to have any effect either. The connection no longer works.
I really do not care if I use the network indicator or not at this point, I simply want the network connection to work properly.
Edit: I realize I forgot to say that I'm using Ubuntu 11.04 (upgraded from 10.10). The network card is the "Integrated Broadcom 57780 Gigabit Ethernet controller".
View 2 Replies
View Related
Nov 19, 2009
Installing the RPM Fusion repositories brakes Yum and PackageKit.
Both stop working until the offending repo files are deleted and I can't download anything from any repository because "yum.py" or something doesn't release the lock and become a zombie
I don't know how to fix this as I tried to edit the repo and put the "failovermethod=priority" in it and it didn't work. I tried to make a repo file from scratch and it didn't work either.
There are no messages on the "Yum log file" I got this:
Nov 19 17:34:44 Installed: rpmfusion-free-release-10-5.noarch
Nov 19 18:20:10 Erased: rpmfusion-free-release
Nov 19 18:23:35 Installed: rpmfusion-free-release-10-5.noarch
Nov 19 18:38:03 Erased: rpmfusion-free-release
So I'm here now trying to see if anybody else is experiencing this and to ask for directions as I don't know what to do.
ps: Could I copy the repositories and make a local repo? If yes where can I find information about doing that?
View 14 Replies
View Related
Aug 25, 2010
I have Lenovo T410 with NVIDIA NVS 3100m running nouveau driver/F13. When I updated to the latest kernel, the display goes blank when booting and remains blank. I can ssh to the machine, so - it appears to be an X/display issue. All else seems to be working normally, and I didn't spot anything of interest in the logs - but perhaps I don't know what to look for.
Also, it appears to be an issue in the kernel package rather than in the nouveau driver package. I can still boot the former kernel successfully - even with the new driver files.
The previous kernel version was the version of the kernel that is provided with the initial F13 install.
[URL]
View 4 Replies
View Related
Dec 29, 2010
I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
View 3 Replies
View Related
Mar 11, 2010
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
View 14 Replies
View Related
Aug 14, 2011
I updated last night and after a reboot I can get the GDM login but as my desktop loads it suddenly stops and complains of an error and won't load. If I load legacy Gnome desktop with Compiz it loads but ALL the lettering and words on the interface are messed up. By this I mean the letters are upside down and the words are spelt backwards. The mouse menus also work in reverse as in the menus themselves are also upside down and the highlighting moves from bottom to top as I move down the menu. Amusing but not what I want from my computer. There is nothing in /var/log/messages or /var/log/Xorg.0.log that would indicate anything is wrong.
I sooo don't want to have to rebuild, again, because of instabilities in F15 updates.
View 10 Replies
View Related
Sep 2, 2011
I installed this package on Fedora 15.
[URL]
I tried to start the application and then the system crashed and showed a message a problem has occured and it could not be repaired by Fedora itself. I had to re-login to fix the issue. When i try to re-login everytime this message appears... like an endless circle.
View 2 Replies
View Related
Dec 24, 2009
I installed Chromium via a repo generously maintained by Tom "Spot" Callaway. Since it's his repo I thought I'd contact him, but I don't really know how - so I'm brining my issue to the forum to see if anyone has a possible solution.I've been using Tom's Chromium fine for the past couple months. After a "yum update", Flash no longer works in Chromium. It works in Firefox. If I try to play any Flash videos it's just a blank box.
View 3 Replies
View Related
Jul 12, 2010
On my HP i7 based laptop the latest kernel 2.6.33-147 and possibly Nouveau/X.org seems to have broken suspend. ie If the laptop is suspended then when woke, the screen is dead and networking does not work and I cannot change to a different console.If I boot the previous kernel this behaviour does not occur.
View 6 Replies
View Related
Nov 3, 2010
After I had upgraded the system to Fedora 14, the icons for pretty much everything except for programs and plain text files in gnome theme (and every other theme that shares them) became inaccessible - they are replaced by a standard icon that appears when no other is found. Other themes, that share no icon with gnome (tango, gnome-colors, etc.), work correctly. I'm using Xfce desktop.
I've deleted icon-theme.cache, but it did nothing.
Any suggestions, what may be causing this?
View 7 Replies
View Related
Aug 8, 2011
I run an Aspire One 522 with a Broadcom BCM4313-Wlan-Card and Fedora 15. To run the card, I had to install der broadcom-wl-Driver, as described here: [URL]... It worked okay. (Althought not perfect. It crushed everytime the whole system, when it tried to connect to a WLAN-Net, unless I first started the Windows on the computer, then shut it down and restarted Fedora. But maybe thats some strange Dual-Boot-thing.) Anyway. After I updated the Kernel to 2.6.40 it seems to be broken. I deleted the driver, reinstalled it, tried the B43-driver. But no mater what: It seems like the NetworkManager doesn't find the card at all. lsmod shows that a modul "wl" is running. And - as mentioned - I installed the Kernel and the two other packages fresh form the repositories.
View 3 Replies
View Related
Dec 15, 2009
I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
View 1 Replies
View Related
Mar 22, 2010
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
View 3 Replies
View Related
Mar 7, 2011
I have sometimes use my PC for games, thus i need EAX support from this. Linux X-Fi drivers works well, exept it's prevent my system to go S3 standby. If i do blacklist snd_ctxfi suspend works after reboot.
View 5 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Jun 24, 2011
I've got this really weird problem and I'm not even sure if it is a problem. I recently upgraded the RAM on my Compaq Presario Laptop from 3GB to 4GB by swapping out a 1GB DDR to a 2GB DDR so now it contains two 2GB DDRs. The BIOS shows 4096 MB of memory, Fedora shows 3955MB (Probably after the reduction for the video memory) so that's fine.
But I noticed a very quick flash during boot in between the Compaq Screen and GRUB. It only started coming after the RAM upgrade. I'm not able to make out what exactly is written. It's too fast. Will try with a proper camera at home. In any case, I could make out some large number probably in the order of gigabytes written in bytes. Again, not sure of the exact value.
So I get a little curious about this message and decide to run a memory test. It's working perfectly. Around 74%, it stops and says Memory Test Passed and moves on to check the HDD. I try the same from the BIOS. In the BIOS, it's a progress bar and no percentage value mentioned. Though the BIOS says 4096MB of memory, the progress bar also stops at roughly 75% and says passed. I'm not even sure what to search for on Google though I tried and got no similar results.
why this is happening? Since it's stopping at 75%, I have a feeling that the change in the amount of RAM hasn't been made in some place by the system.
View 6 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Feb 19, 2009
How to make internet sharing in Fedora with two inputs & one output.
View 14 Replies
View Related
Feb 21, 2009
We installed Fedora on top by my WindowsXP, we have updated the connection information with the addresses, but can't access any website. Connection Manager says we're connected. We created a new wired network connection, but it doesn't appear in the choices.
I installed Ubuntu recently and had a similar problem, only mine was that my computer was competing with hers (something to do with DHCP). The solution was to alter my /etc/network/interfaces file, but I also screwed with settings in the "Network Connections" thing, pretty much altering a connection my /etc/network/interfaces file seemed to have made. My problem was only solved as far as I cared. I wonder if this is the same problem.
On the other hand, we attempted connecting the Fedora box directly to a modem and still no internet, so I believe they are entirely unrelated. But I wanted to include this for completeness in case they are.
View 5 Replies
View Related
Mar 1, 2010
I have the following nasty issue:I am using fedora 12 and I use vpn for working remote.When I browse the internet the speed is very slow!even when I do a yum update it downloads the packages with max 100kb. if I drop the vpn connection I download the packages with 1Mbdo you know what the problem could be? i created the vpn connection using the network manager...it is a regular pptp connection for the vpn!
View 14 Replies
View Related
