I have been studying LAMP for a while now and all my websites are on the localhost. But if i wanted to access my websites from a different computer, how do i access do that? LAMP (192.168.0.2) client (192.168.0.3). Do i need to setup the DNS servers as well in my home network for me to access my intranet (LAMP).
View 2 RepliesI just installed Fedora 15 and everything is working ok except i can't connect to some websites such as facebook or hotmail. I tried doing the same on windows and everything is ok there. I've been searching through forum about this problem but nothing seems to help. Has anyone else had this kind of problem and managed to fix it?
View 10 Replies View Relatedrecently I have bought a new wireless router and now I have problems connecting to some (secure) websites. I can't login to gmail and facebook while I am still able to connect to these sites using my old router. I have also tryed to connect to these sites using my new router on windows and it worked with no problem.It is really strange for me, although I don't know that much about networking. I am using Fedora 13 and a TP-Link (TD-W8901G) Wireless router and I have these problems using both wired, and wireless connections with this router.
View 5 Replies View RelatedI am in the process of setting up my own Linux gateway/firewall using two nics eth0(external network) and eth1(internal network). The Linux gateway hands out ip addresses using dhcp3-server, and uses iptables to route the traffic correctly. Clients are able to connect and access the internet...everything is working great, HOWEVER I can't access my apache virtual hosts websites from the internal network? They work just fine if i access them from the outside world
I can type ip of the web server, 192.168.0.201 and it shows the first virtual host listed in my /sites-enables/000-default folder. but i can't use any DNS entries. I don't have any internal DNS servers running. This doesn't makes sense, because if i replace the linux firewall/router with my normal linksys wrt54G router it works just fine.
My internet connection used to be a direct LAN connection to my provider. Back then, everything would load fine on both Windows and Ubuntu (dual boot). However, a while ago they started needing me to dial using a username and password (over a PPPoE connection). But since then, I haven't been able to browse certain websites on Ubuntu, even though there have been no such issues on Windows. Some example websites are - Ovi's sign in page (although share.ovi.com loads fine, and nokia.com loads fine), Live Mail (works on Chrome(ium) and Opera but not on Firefox (both 3.6 and 4)) and other random websites.
Some of the websites that don't load show timeout messages on Chrome and for some websites, the browser will keep trying to load without an end (I've left it like that even for hours but not noticed anything different happen).
I have tried changing the DNS servers to the ones suggested in the comment. I have even tried booting from a Fedora LiveCD and then changing the DNS to those (and even to the ones of OpenDNS), but the exact same thing happens. Here's output of ipconfig on Windows: Opera error messages seem to be a little more informative and they have the following errors in turns:
Secure connection: fatal error (552)
Secure connection: fatal error (40)
Followed by: Opera was not able to connect to the server. The server may be using the unsupported SSL 2 protocol, which is not considered safe enough for secure communication. The site owner should upgrade to TLS 1.0 or newer. Does anyone know why this is happening and how it can be fixed?
Update: Just saw here [URL].. that someone else was having similar problem and solved it by putting a NetworkManager.conf file in /etc/NetworkManager. What needs to be in that file?
First off, since this seems like a networking issue I put it here, but if it should be somewhere else, the powers that be should definitely move it over.
I'm using Ubuntu 10.10 on Dell Presario M2000 I have made sure that all updates have been done.
As the subject states, the admin account (mine which I'm posting to the forum with right now) can access the internet and see webpages. The user account on this laptop (my underaged sister who my parents don't want full access to the computer) will not access any webpages, it just continually looks like its loading.
I have made sure the wireless card drivers are installed and activated.
Also, I ran iwconfig and ifconfig and here are their results
p { margin-bottom: 0.08in; } Results of iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"myqwest4137"
[Code]....
These were both run from the user account. At this point it looks like its connecting to the internet through the wireless card as I was also able to run the update manager through the user account and have it download the updates (after putting in my admin password of course).
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I've written two web pages that show the status of a internal application. The idea was to display both of them, on two different monitors, using only a single PC with two graphic cards. The system will be mounted to a wall and has no keyboard or mouse. That's why I need a script that will automatically launch two instances of firefox (in kiosk mode), each on it's own monitor.Currently the OS installed on the PC is OpenSuse, but I'm free to install a different linux flavor.So, how do I launch firefox on a specific monitor?
View 1 Replies View RelatedI'm not really a newbee in Linux but I am a newbee in networking. I have both a Ubuntu laptop and a Gentoo desktop computer. I have just bought me the MBR1000 Cradlepoint router and it works great with my Verizon USB 760 modem plugged in it. I can now send and receive email on my Ubuntu laptop. I like it.My Gentoo desktop computer is just sitting there with no Internet access because my Verizon modem is no longer plugged into it but plugged into the router instead. Only my laptop now has Internet access. The laptop has an integrated wireless card built in the MB but my desktop has no such capability.
Is there a way (besides buying a wi-fi adapter) to get Internet access on my desktop computer through networking so that the router would give both computers Internet access at the same? My Gentoo desktop does have an ethernet adapter that perhaps I could useThe router has several LAN ports and one WAN port, both unused.
I had Fedora 12 installed on my laptop and everything was working okay.
After making a fresh install of Fedora 14 I can now only access some websites, others cannot be found.
I have spent hours trying to resolve this without success.
I recently decided to install Samba in Ubuntu as a home file-sharing server. However, when I try to access this computer from another (using Windows 7), an error messages comes up. It says: "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The specified domain either does not exist or could not be contacted."
running apache2, i have already created a working sites. using virtual name hosting.but my problem is, i cant access my other sites except my server's localhost from other computer. i dont know what seems to be the problem, can you guys point me where to start looking?
View 2 Replies View RelatedI'm not familiar at all with the networking functions of linux systems, but I just bought an iPad, and I want to store all my movies, music, and documents on my computer at home, and access them from my iPad. I've heard a VNC client is the best way to go. But will this allow me full access, or just to view the screen? Will I be able to watch movies at the highest framerate with this method?
View 3 Replies View RelatedI'm using Ubuntu x64 (dunno which version, but I don't think it matters) and I'm concerned about security with PHP.I remember using lighttpd and I had some mystic configuration and the secuirty was perfect for me - if one website gets hacked then the others are still safe (kinda).Now with apache2 if I enable safemode I'm still able to go outside web directory and actually I can go really far untill user/group matches.I tested the system with r57shell and I was able to mess up other websites.Is there a way to disallow access to other websites?
View 5 Replies View RelatedI have managed to configure AWstats to work from one server to access the log files for multiple websites on multiple servers and even managed to write a little front end php site to access all the different conf files. I want to know if there is a way of combing two conf files for the same site but are on two different servers in a loadbalanced situation. so my conf files look something like: [URL].. I have to monitor bandwidth for our websites and its gets tedious switching between the various conf files for the same site and totaling it up so I was hoping I could combine the output of both conf files on screen using some funky command in the awstats.pl script
View 1 Replies View RelatedSo, I'm trying to set up a network with my windows netbook so the Ubuntu comp can access the internet through the netbook's wireless. Finally got the network set up, but can't access the internet on the Ubuntu comp. Also, the Ubuntu machine can recognize and access the files on the netbook, but the netbook only sees a computer named Owner-a6012abd6 which asks for a password.
The netbook is running Windows XP SP3, with an Atheros AR9285 Wireless Network adapter(internet) and an Atheros AR8132 PCI-E Fast Ethernet Controller. The Ubuntu comp is running Ubuntu 9.04.
I set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)
- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck
I'd like to be able to limit access to a particular website, based on the time of day. I would also like to be able to password protect this if possible.So for instance, from 7am until 10pm daily, I can access URL... but after 10pm it redirects to 127.0.0.1 or something. And this configuration be protected by only allowing a certain user (other than root) to change the config?
View 7 Replies View RelatedI have been using lynx for sometime specially when on a slow connection. I was wondering if there's a way of accessing flash-based websites (completely flash-based) using lynx?
View 9 Replies View RelatedI have configured my squid that have a limited access to websites but still some website were accessable vis https so I removed transparent from squid. Now what changes do I have to make in iptbles
View 1 Replies View RelatedI don't know is this the right place to ask, but i must ask some questions Here's my problem.I'm a student in highscool,and here we use Linux(ubuntu) OS .Every classroom has like 30 PC's connected with the main computer(the teacher's one) so....3 days ago we were forbidden access to some websites it says This domain is Blocked.By the way the Linux version installed is 7.04(feisty Fawn) i tried disable cookies that did not worked,also tried to whitelist some website,that also didn't worked out
View 7 Replies View RelatedI have been trying to get Squid to work so that I can restrict access to a particular web site during certain hours every night. I can't seem to get it working, however. I am still able to access the site. The following are the relevant lines from my squid.conf file:
acl restricted-domain dstdomain "/etc/squid/denied_domains.acl"
acl test time 19:00-20:00
acl bedtime time 22:00-23:59
[code]...
I am in a situation at the moment which means I am going to be without an ISp for a week or two, and I can't survive that long without the intenet!!! What's more, I have 8 computers that need to connect, though not necessarily at the same time, but certainly more than one at a time. Anyway, I came up with an idea to buy a Mobile Broadband Dongle, and then share the connection via my PC. Problem is, I don't know how I would go about setting my PC to be a Wireless Access Point/makeshift Wireless Router, and sharing the connection.
View 9 Replies View RelatedHow I can benefit from a public external IP? Do I need a public IP to access my computer from a remote site?run a tftp server ?
View 1 Replies View RelatedI am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
I am facing a problem concerning secure websites where I get the "Connection Reset" error in browser after a timeout of I think 1 minute.
OS: Fedora 14 ( I faced same problem with Ubuntu 10.10 )Browsers: Chrome and Firefox
The issue is not there on Windows using Chrome and Firefox so I believe this is a problem with how linux manages secure connections. I can access all the google secure websites too. There a few other websites apart from facebook.com that I know which I am unable to access.
i was tasked to setup a proxy server to block access to some websites. i'm using centOS 5 and Squid 7:2.6 STABLE21-6.e15...i appended the following and tested the configuration with the supposed server i am using and the it does seem to work but now i'm wondering how i can test it with a client computer..i have 2 LAN cards and i just connected the other to one PC (can a direct connection work or does it need to pass thru a switch or hub)...i just can't figure out how it should be... how do i configure the 2nd LAN card to use this computer as its proxy server?
View 8 Replies View Related