Wireless stopped working with version 10.10, it was fine with previous versions, now it says "device not ready". Hardware works fine under Windows, and is a Linux-friendly Asus RaLink RT2860.
View 9 RepliesThis morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
is there any way to download the 'package indexes' on a seperate computer operating on windows vista, before transferring them, via usb, to my laptop working on linux 10.10. As the reason i need them is to get the wireless to work so the internet can work.
View 1 Replies View RelatedI've tried to install Linux systems have been failures. Trying to make this work, trying to get on the right wagon, and it's frustrating as all get-out.
Installed netbook remix onto a HP Mini 1000 (1116NR?) and everything seems to be working alright, except no wireless networking. I tried a couple of things and now it shows "device not ready" instead of "disabled", so I figure I'm getting somewhere.
The device is:
Broadcom Corporation BCM4312 802.11b/g (rev 01)
I want in. This is my 3rd try over the years of running Linux and I always hit snags like this that I can't fix because I've never gotten to play with it enough to learn what I'm doing and generally don't have a 2nd computer like I do right now.
I just recently installed ubuntu, my first experience with linux. I don't know if it isn't recognizing my wireless card or if it is another issue, but I am unable to view any wireless networks/connect to any. When I click on the network icon it says "wireless" with Device Not Ready underneath.
View 9 Replies View RelatedI just installed Ubuntu 10.04 and I can't seem to get the wireless connection to function. Ubuntu either says that the card is turned off or if I toggle the wireless switch on my keyboard it then says 'device not ready.' I'm using a Dell Wireless 1397 WLAN Mini-Card, and it works fine when I boot in Windows 7.
View 8 Replies View RelatedI thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
I have a HP Elitebook 6930 with Intel 5300 wireless card and today I update it from Fedora11 to Fedora 12 and now I cannot connect with my home wireless network. Previously with F11 I connected without problems but now the wireless connection presents a "Device not ready" message. I tried to switch on/off the wireless card but without results. I had to set intel_iommu=off as kernel parameter to complete the boot. Is something related to it?
View 2 Replies View RelatedI'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
I have installed Ubuntu 11.04 on my laptop. For some reason Wireless Network does not work any more (there was installed 9.04 before).
lspci says:
Code:
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
System->Administration->Additional Drivers doesn't list anything.
I'm running ubuntu 9.10 (cause 10.04 is crazy glitchy on this system) and I've hit a snag.My wireless won't work! I used it before in 10.04, but it won't work in 9.10.I've made sure that the wireless switch on my keyboard is on. When I click on my network icon, it says that the device is not ready. I'm fully updated and just need this last thing
View 1 Replies View RelatedEverytime I to turn on my wireless device, and try to connect to a wireless network, i see the phrase " device not ready" greyed out, and not able to access a wireless network. i do not know what to do
View 6 Replies View RelatedI downloaded Ubuntu 10.04 and burnt it to a CD so I could try Ubuntu before installing it via Live CD. It automatically displayed the window where you download drivers for your hardware, I activated the Broadcom drivers, and WiFi worked fine. So then I installed it inside of Windows (as a dual-boot). Now, when I open the hardware managing window (I forget what it's called), there are no drivers listed to be activated. Since I am unable to activate the Broadcom divers, I can't get internet over wifi. Also, I don't have access to a wired connection, but I do have blank CD's and a USB stick (if that helps). How can I fix this?
[Code]...
I tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
i have recently installed Ubuntu 10.10 on my computer, which is HP 4710s ProBook.I've installed it with wubi and everything seem to be working just fine, except for my wireless.It is showing me: device not ready(firmware missing).
View 1 Replies View RelatedI want to give a new life to my old Mac Mini that has become too weak for Mac OS ...I successfully installed the Ubuntu 9.10 PPC version (alternate) on the machine. EXCEPT for the support of the wifi antenna. Network manager says: "device not ready". I suppose there is a standard tweak to get over this hurdle.
View 5 Replies View RelatedI tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI am running a CentOS 5.6 as a Virtual Machine on my Laptop. And, to connect to internet I am using a datacard (usb modem) device (Tata Photon +).
Now, internet is working well on my VM through interface ppp0
The problem is that when I start my interface eth0, internet (running through ppp0) stops.
Quote:
[root@kick ~]# ip route show
172.29.242.9 dev ppp0 proto kernel scope link src 14.99.211.189
default dev ppp0 scope link
[root@kick ~]# ip addr sh
1: lo: <LOOPBACK> mtu 16436 qdisc noop
[Code]....
Recently, I wiped my existing install of Ubuntu 10.10 and reinstalled it over. That went smoothly, except for one little snag. Now when I try to connect to the Internet, up on the top when I click the little network icon, under Wireless Networks, instead of showing the networks I can connect to, it says:
"Device Not Ready (Firmware Missing)" So I move the little wireless switch on my laptop, and then it says:
"Wireless Disabled" What did I do, and how do I fix it?
I have a Lenovo ThinkPad Edge E520 (1143CTO) and I'm having problems getting my wireless NIC to work, as far as I can tell the drivers and firmware are all installed and the device is working.I have searched around and have done all the fixes I can find online, this is my first 'real' experience with Linux, so patience is appreciated, as is any help I can get. I also had this problem with Linux Mint 11.It appears that the model of my card is BCM43224, but it doesn't show up anywhere in the with any commands?sudo lshwQuote:
*-network DISABLED
description: Wireless interface
product: Broadcom Corporation
[code]...
I have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!