Ubuntu Networking :: How To Set MTU For PPP0
Jun 15, 2010internet works with MTU=1460 for ppp0. I set this up manually using ifconfig. What changes are required so that it is done by default when PPP0 connects or at boot?
View 4 Replies
ADVERTISEMENT
Ubuntu Networking :: Cannot Browse Net When Ppp0 And Eth0 Are Up?
Apr 12, 2011I'm a n00b with these things so be nice please XD I have recently touched on this in previous posts but never came to actually trying to fix it. I have a D-Link DSL-2640R router, with dhcp disabled. It is connected to my computer via ethernet. I have the network manager configuration set to manual with an address of 192.168.1.2, Mask 255.255.255.0 and the gateway column is blank. I would like to know why my eth0 interface seems to stop me browsing.
I use a T-Mobile HUAWEI usb mobile broadband stick, Model E1750 for internet access. If anyone has any ideas as to why this is happening please discuss them. I have also tried editing the /etc/sysctl.conf file and uncommented the net.ipv4.ip_forward=1 line to enable ipv4 packet forwarding. This has not solved my problem.
Ubuntu Networking :: Make An Application Use Ppp0 Exclusively?
May 18, 2011I'm running 10.10 64 bit. I have a vpn service and I'd like to configure my bittorrent client to use only the vpn link (and NOT continue through my plain-old ISP service if the vpn drops). I imagine there are a few possible approaches to this:
1.have a script that checks if ppp0 is up an terminates the bt client if not
2.configure the bt client to use only ppp0 (though I tried this with qtorrent and it switches over to eth0 if vpn drops...)
Networking :: Suse 11.3 Missing Ppp0 Interface
Oct 28, 2010I just setup a SuSE 11.3/64 server and I am trying to setup pptpd for a vpn. I noticed thatg the ppp0 (or any pppx) interface is non-exoisting and I think that that is the problem why my gre packages are not being sent by pptpd (as I have checked all other options). I have tcp port 1723, and protocol port 47 (gre) open on the firewall (SuSEfirewall2). I have traced the responses using tcpdump and only when the server sends gre to the remote client, the client never receives it (the 1723 connection is established). I checked the old server (SuSE 10.2) that worked the vpn fine, and the only thing missing on 11.3 is ppp0. All other hardware (routers, etc.) are the same. I suspect that pptpd tries to use ppp0 and the interface is non-existing. I can remotely ssh to the server, dns works, samba works, everything else works. Is it something I am missing? How do I create if ppp0 and link it to eth3, the internet gateway?
As always, a windoze tech crashed the old server and I had to setup the new one in a hurry, just before going on vacation, and people want this done by yesterday? They paid $$$$ to the windoze tech (who said Linux is obsolete) even after he almost brought the company down!
CentOS 5 Networking :: Ppp0 And Ppp1 Keep Switching Around?
Nov 23, 2009my problem is i have setup 2x ppp used for adsl to split local and international bandwidth ppp0 is using the international account and ppp1 is using the local only account this all works fine but every so often i notice when i do an ifconfig that ppp0 is dialed up on the local account and ppp1 is dialed up on the international one, and sometimes a reboot fixes it and sometimes it doesnt
my config files are the following:
# Default ADSL network config file, as used by redhat
USERCTL=yes
PEERDNS=no
TYPE=xDSL
[Code].....
Ubuntu Networking :: Sharing Internet Connection From Ppp0 To Eth0?
Jan 23, 2010i want to share the internet connection from Laptop to PC via LAN crossover cable
here's how i connect to the internet in laptop, and connected PC via LAN:
i need to share pppoe(ppp0) to (eth0) , that is what i've been doing in Windows before, but i dont know how to share in Linux, i tried to follow Ubuntu Help about ICS, but it doesn't work
Ubuntu Networking :: Can't Connect To The Internet With Ppp0 While Eth0 Is Active
Jul 2, 2010My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
Networking :: Use Both Networks Simultaneously Ppp0(usb Device) And Eth0
Apr 30, 2011I am running a CentOS 5.6 as a Virtual Machine on my Laptop. And, to connect to internet I am using a datacard (usb modem) device (Tata Photon +).
Now, internet is working well on my VM through interface ppp0
The problem is that when I start my interface eth0, internet (running through ppp0) stops.
Quote:
[root@kick ~]# ip route show
172.29.242.9 dev ppp0 proto kernel scope link src 14.99.211.189
default dev ppp0 scope link
[root@kick ~]# ip addr sh
1: lo: <LOOPBACK> mtu 16436 qdisc noop
[Code]....
Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work
Nov 22, 2009I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:
pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
OpenSUSE :: Unable To Connect PPTP (VPN) Over Ppp0 - 3G Modem (MMX 310G)?
Nov 23, 2010I have installed and setup 3G which works perfectly fine. I use sakis3g scripts for connecting to 3G network. My VPN profile created with network manager (client/NetworkManager GUI) works well.
#cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',wlan0,&
Now when I do the same with using using ppp0 (which is after connecting to VPN) I get the following error messages. #cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',ppp0,&
[Code]...
Debian Configuration :: VPN PPTP Load On Start And Route All Traffic Through Ppp0?
Mar 28, 2016I am in serious situation involving PPTP protocol VPN in Debian 8 Jessie stable. I recently became a paid VPN subscriber. Using PPTP; Is there a way to automatically route all traffic through ppp0? Im getting the vpn service killed (ip address goes back to normal unmasked state) whenever there is a power outage (modem reset) and there are alot of those where I live, Im going to get astabilizer and I need a software solution for the situation as well. Theres gotta be a way to route all traffic through the VPN route ppp0 . I tried adding persist and maxfail 0 to the pptp config file but it did not do what i wanted.
Here's my peer configuration file :
pty "pptp blabla.net --nolaunchpppd"
name blablabla
password blablabla
remotename PPTP
file /etc/ppp/options.pptp
require-mppe-128
refuse-eap noauth
persist
maxfail 0
On a second note, its clear to add that I basically need a way to also auto load the line
pppd call blabla.net
and
route add default dev ppp0
On system startup by default so the computer does not use "Wired" connection ^at all^ when not through ppp0. Any other way of not losing VPN anonymity ever due to hardware malfunction.
Is there a way to do this? Ive looked on the net and everything seems like its either from the nineties or can fry my pc , Im no debian expert, less than a year at linux..
Need it to use wired only if ppp0 is being used so if its no vpn, no connection at all period,
Ubuntu Networking :: Find Directions On Networking Two Computers Together In Order To Share Files?
Nov 20, 2010I am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
Ubuntu Networking :: Error Appearsubu@ubu-AOD255E:~$ Sudo /etc/init.d/networking Restart?
May 21, 2011trying to bond two 3G modems but I cant Im really new in this matther so I really This is the error that appears
ubu@ubu-AOD255E:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface ppp0=ppp0.
[code]....
Ubuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network
Feb 14, 2010I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedUbuntu Networking :: Crosswire Or Ethernet - Make A Server Box My Entrypoint To My Networking
Mar 1, 2010Im trying to make an ubuntu server box my entrypoint to my networking. Meaning itll function as a server, a firewall, and a gateway. so i already installed dhcp3 and a dns server.
I have 2 ethernet cards in it. So now i wonder, should i the second card into a router's modem/wan port and make the router a switch? or should i plug it into one of the routers lan ports?
Ubuntu Networking :: 9.10 Updates Yesterday/Today Cause Packet Loss On Networking
Apr 9, 2010I have 3 Dell Precision M4400 machines. After getting updates yesterday or today, I get random network dropouts like crazy, on wired or wireless. On one machine I was able to turn off ipv6 in grub and reboot, and it works now. However on the other 2 machines, still have the same problems. All 3 are running 9.10 64 bit. Is there a way I can back out the updates so the network works again? Anyone else see this behavior after updates today?
View 2 Replies View RelatedUbuntu Networking :: Networking In 10.04 - In Network Manager There Is Not Way To Select My Modem In The First Step
May 3, 2010I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedUbuntu :: When Click On Networking Icon In System Tray - Says Networking Disabled
Jul 13, 2010I do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04
View 2 Replies View RelatedUbuntu Networking :: Drivers For Belkin Double N And Wireless Networking USB Adapter?
Aug 3, 2010Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
Ubuntu Networking :: Wired Networking Not Working At Work - Fine At Home ?
Aug 24, 2010I just started having a problem with my 10.04 laptop a few days ago, maybe Thursday, last week. When the computer is plugged into my home network (standard 192.168.1.1 sort of IPs) it works fine, but when I try to connect to my work network (130.15.90.XX) I am unable to pick up an IP. The router in my office is working fine, all the windows boxes can connect.
I've also noticed that when the computer is plugged in at work the notification icon for the networking indicates it is looking for a wireless connection (rather than the normal up/down arrows), even if wireless is deactivated
I can set a static IP in /etc/network/interfaces and everything works, so it seems to be a DHCP problem?
Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36
Nov 7, 2010I'm using a Packard Bell Easynote Tn36 laptop, and I'm having trouble with Ubuntu 10.10 and the wireless network card, (probably because of lack of driver). I.e. it is disabled.
How can I enable it?
I input this code:
And here is the output:
Ubuntu Networking :: Network Manager Applet Enable Networking Unchecked
Apr 2, 2011Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
Ubuntu Networking :: Dual Ethernet Networking - Lose Internet Connectivity?
Apr 18, 2011I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
Ubuntu Networking :: 11.04 Networking - No Ping Response - Edit .conf File?
Apr 27, 2011I can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies View RelatedUbuntu Networking :: Networking Widget Fails To Enable Wireless Card / Fix It?
Apr 30, 2011I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36 - 11.04
May 1, 2011I have Packard Bell easynote tn36 and I used to use ubuntu 10.10 and then when I upgrad it to ubuntu 11.04 the wireless doesn't work (disable) and I can't press the botton of Enable wireless.
View 9 Replies View RelatedUbuntu Networking :: Unable To Connect To A Small Number Of Random Websites: Otherwise Networking Is Fine
Dec 29, 2010I was having no problems (that I knew of) browsing the web since installing Ubuntu 10.10 a week or so ago. I was previously trialling Win7 as my customers will likely be using that in the future. Then I wanted to go to internode.on.net. Got the following: Quote: Firefox can't establish a connection to the server at internode.on.net. or Quote: Oops! Google Chrome could not connect to internode.on.net
As it was just after Christmas I thought it must be down, for upgrades or maintenance etc. I later tried to go to Freebsd.org; same error. I've been having a small number of other websites give the same error. I thought nothing of this until I tried it on my wife's macpro. I could log onto all the websites I wanted to and none gave any indication of having been down. Both boxes are on the same adsl connection. I still can't access internode or freebsd on 10.10 yet have been able to access every website on OSX. Now, I was only looking at them for info but am worried I won't be able to access something important. (so far everything I 'need' is working)
ping just drops out. edit: weirdest thing! I just retried and now can not emulate the problem for internode. freebsd still won't show. that is less than five minutes between problems and resolution! I hadn't even posted! But I still would like to have an idea of what is going on. Here is the ping error for freebsd: Quote:
[Code]...
Networking :: Networking Is Not Getting Out Of The Dosbox Instance \ Needs To Have Some Config In Place To Link Networking Over To Dosbox?
Jan 31, 2011I am attempting to setup and old BBSinside of DosBOXI've built one of the DosBOX Megabuilds, with the NE2000 patch.It uses libpcap in order to piggy back on top of the system's NIC. All of the dosbox side appears to be working.My system comes up, gets the MAC address i told it to use, i can load a packet driver in dosbox, all of that seems well and good. The issue, i think, is on the linux side. It's built on a Fedora 14 box. I'm getting the feeling that networking isnt getting out of the dosbox instance. Does it seem possible that fedora needs to have some config in place to link networking over to dosbox?
View 7 Replies View RelatedUbuntu Networking :: Samba And Windows Networking - Read / Write Access To All Folders Contents From Both Machines
Mar 9, 2011Ive managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
View 7 Replies View RelatedUbuntu Networking :: Acer Travelmate C110 Networking Disabled
Mar 8, 2010I have just finished installing 9.04 via USB onto an Acer Travelmate C110.For the record, 9.10 refused to even boot on this laptop. I used universal-usb-installer and unetbootin, both without success.The installation completed successfully, except that wireless networking is not enabled. Can someone please point me to the correct resource whereby I can get the wireless nic working.
View 3 Replies View Related