Networking :: Unable To Telnet Using IPv6
Jul 21, 2010Hey even I'm not able to telnet to IPv6 address on port 23
View 2 Replies
ADVERTISEMENT
OpenSUSE Network :: Telnet Does Not Work In IPv6 Test Environment
Aug 27, 2010In an IPv6 test environment I have installed an openSUSE 11.2 system. I have also installed telnet and it works with IPv4 (I can open a session from a Windows console with "telnet ipv4addr").
If I try to open a session with "telnet ipv6addr" I get the response: "Connecting To ipv6addr. Could not open connection to the host, on port 23: Connect failed".
Does the telnetserver support IPv6 or did I something wrong?
Networking :: Unable To Get IPv6 Addresses Using Ioctl()
Feb 4, 2011I am able to retrieve IPv4 addresses with ioctl. But it is not returning IPv6 addresses. My requirement is to get both IPv4 and IPv6 addresses. I can not use getifaddrs() since it has to be common code between linux, solaris and aix. Solaris and AIX are not having getifaddrs(). Following code is returning only IPv4 addresses.
Code:
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <netdb.h>
[Code]....
Fedora Networking :: Ipv6 With Tunnel Broker - Better Client For Non Native Ipv6 Connectivity?
Jul 22, 2009I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View RelatedFedora Networking :: FC15 IPV6 Wireless Router - No Longer Gets An IPv6 Address
Aug 31, 2011I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused
Jun 12, 2011I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
Networking :: Telnet: Unable To Connect To Remote Host: Connection Refused - LAN
Nov 10, 2010When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
Networking :: Difference Between Krb5-telnet And Ekrb5-telnet
Feb 18, 2010I am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies View RelatedGeneral :: Unable To Login Using Telnet?
Sep 8, 2010I was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
General :: Unable To Do Telnet On Centos 5.5
Apr 6, 2011i am on CentOS 5.5 ,and unable to do the Telnet. SElinux is in Permissive mode and firewall is off. below are the details for the help. i tried it before and after disabling the firewall and SELinux.
[Code].....
General :: Unable To Close SSHD On IPv6 TCP Port?
Aug 23, 2011I'm running Ubuntu 10.4 and I've tried disabling IPv6 as I don't currently need it. I rand the following to disable IPv6 and then rebooted my server:
echo "#disable ipv6" | sudo tee -a /etc/sysctl.conf
echo "net.ipv6.conf.all.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf
echo "net.ipv6.conf.default.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf
echo "net.ipv6.conf.lo.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf
After the reboot I can see that IPv& is disabled by running:
cat /proc/sys/net/ipv6/conf/all/disable_ipv6
On running netstat -antlp i see that most of the IPv6 applications have closed but SSHd keeps running:
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:9090 0.0.0.0:* LISTEN 663/java
[Code]....
Ho can I close the SSH daemon on port 22 of the IPv6?
OpenSUSE :: Unable To Use Telnet To Connect To Smpt Server
Apr 17, 2011I'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
View 2 Replies View RelatedGeneral :: Unable To Telnet To A Windows Server Machine?
Aug 28, 2010Why am I not able to telnet to a Windows server machine? Is it because the telnet server is not running there? A remote desktop connection works though.
Does a telnet server run by default on a Unix machine?
General :: Unable To Access Linux 5.4 Through Telnet On Windows Xp
Jul 26, 2011linux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies View RelatedGeneral :: Telnet :Unable To Connect To Remote Host:Connection Refused?
Jul 3, 2011My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
Ubuntu :: Shell Script For Telnet Using Expect - Unable To Find The Tutorial
Jan 22, 2010I need to open a telnet session using a shell script that follows this format:
telnet 10.100.0.1
expect "Password:"
send <password>
[code]....
send "pen" (till the end of lines generated as in |more.... usually we use like 8 space bar buttons after "pen" to generate all)
and I want to redirect the whole generated result of "pen" to results.
Ubuntu :: Telnet: Unable To Connect To Remote Host: Connection Refused
Jul 16, 2010when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
General :: Telnet - Unable To Connect To Remote Host - Connection Refused
Sep 11, 2009I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
Red Hat / Fedora :: Telnet - IP - Is Giving Unable To Connect To Remote Host - Connection Refused
Nov 26, 2010I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedUbuntu Networking :: No Ipv6 Ip From ISP?
Nov 29, 2010I have Ubuntu 10.10 installed on my laptop. My ISP natively supports ipv6, but since last weekend, I do not get an ipv6 ip. When I use a live cd however, I do get an ipv6 ip. For as far as I can see, all settings (/etc/network/interface and the settings in network manager) are exactly the same.
Output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet addr:XXX.XXX.XXX.XXX Bcast:XXX.XXX.XXX.XXX Mask:XXX.XXX.XXX.XXX
inet6 addr: XXXX::XXXX:XXXX:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
EDIT: is there a way to let the netwerk be automatically configured as happens during installation? It would be nice to start with a clean and new set of network config files as there were just after I installed Ubuntu on my system, without a full reinstall of my system.
Networking :: Can't Use Ipv6 Although Getting Address?
Jun 30, 2009I have a problem with my ipv6 connection: although I can't get ipv6 address with DHCP, I can't use ipv6 network. I tried [URL], and the tortoise is static. I want to fix it out , so I use 'ifconfig' to see my network configuration:
eth0 Link encap:Ethernet HWaddr 00:50:8d:ef:dd:06
inet addr:210.77.9.102 Bcast:210.77.11.255 Mask:255.255.252.0
inet6 addr: 2002:d24d:b64:4:250:8dff:feef:dd06/64 Scope:Global
[code]....
Some people told me that the fisrt ipv6 address was wrong and unsuitable for ipv6 connecting. I tried /ect/init.d/networking restart but it didn't work. How can I use the second address as my ipv6 address and fix the problem out ? Now it seems there is not problem with the ip adress but the route. After watching some video, I suddenly could use ipv6. I did 'ifconfig' again and nothing was different. However, the result from the command 'ip -f inet6 route' changed: the last default route was gone and there was only one default route.
Networking :: Use Domain Name With IPv6?
Jan 12, 2010I have installed Bind 9.6.1 on my linux pc. I have to resolve domain name using IPv6 address. I have made following entry in the /etc/resolv.conf file code...
address of the machine on which Bind is running. The problem is that I am not able to ping open-ims.test domain name. If I use IPv4, everything works fine but how to ping domain using IPv6.
I have also made changes in dnszone file by replacing IPv4 address with IPv6 address and also changing A to AAAA.
Ubuntu Networking :: Telnet Via Ssh On APC UPS?
Jan 12, 2011I have some APC UPS devices that I'm trying to log in to. They are currently configured to use telnet -- as a safety precaution, they can only be accessed from our 'bounce' machine. So because I want to do this from a script, I'm doing it like this ssh decoherence@bouncemachine telnet stupidAPCdevice
This works fine on all the other devices I'm trying this on (Cisco gear, mostly) but the APC won't take any input. I get the login prompt but when I type in my username, ssh echoes it but the APC doesn't appear to ever receive it. It just hangs there at the username prompt. I'm guessing that its telnet implementation is a bit weird (seriously, all the management stuff on APC gear really sucks but anyway
Anyway, I'm just wondering if there are any simple flags I can pass to telnet to make it cooperate. The man page talks about a 'mode' command that lets you fiddle with LINEMODE which sounds like it might be promising but I don't know how to set that in the command line as opposed to interactively.
Networking :: How To Use Telnet Command
Sep 1, 2010how to use telnet command
View 3 Replies View RelatedFedora Networking :: Add Repository Using Ipv6?
Nov 21, 2010I want to add repository using ipv6. So, I add a xxx.repo file in /etc/yum.repos.d/. Just like it:
[sjtu6]
name=Fedora $releasever - $basearch - ftp6.xxx.xxx.xxx
baseurl=ftp://ftp6.xxx.xxx.xxx/fedora/releases/$releasever/Everything/$basearch/os/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$basearch
Ubuntu Networking :: Can't Get IPv6 Address
Nov 4, 2010I have a networking problem with my computer. Under Windows, the computer can get both v4 and v6 address via DHCP. However, the same computer can only get v4 address under Ubuntu. Does anybody know how to solve this problem?
View 3 Replies View RelatedNetworking :: Ipv6 Connectivity Using 6to4?
Jan 14, 2011The goal: ipv6 connectivity using 6to4 The problem: no connectivity on some internal hosts (mixed win & debian) and no ipv6-web access on any host. Let's start with my external box. It is headless debian lenny dhcp/local-dns & cache/firewall. It has the following interfaces after a reboot:
[Code]...
My understanding is that ipv6 will auto-configure itself and that the radvd file is all that is needed by the external host to give all the ipv6 enabled internal hosts ipv6 web access. My question: How is my external host misconfigured? Or are the problems specific to the internal hosts? I am assuming that I have issues on both the external and internal hosts since some of the internals have golobal ipv6 address and some don't. I do however wish to address the external host first.
Networking :: Disable The Ipv6 Address Only?
Jul 28, 2009I have a host and typing ifconfig I get:
eth0 Link encap:Ethernet HWaddr 00:0E:7F:4F:E4:09
inet addr:130.130.9.9 Bcast:130.130.255.255 Mask:255.255.0.0
inet6 addr: fe80::20e:7fff:fe4f:e409/64 Scope:Link
[code]...
and to do a test i want to disable or delete the ipv6 address, but mainteining the other configured parameters. Looking on the ifcfg config file I have
DEVICE=eth0
BOOTPROTO=static
BROADCAST=130.130.255.255
[code]....
and nothing about IPv6... Then, using ifdown-ipv6 could i remove only the ipv6 address?
Networking :: Disable Ipv6 In Ubuntu 9.04?
Apr 2, 2009I have tried to disable the ipv6 support in ubuntu 9.04 32bit but the /etc/modprobe.d/aliases does not exist so I can't disable the suport as sugested for the previews versions. I need to disable it becouse it is pounding a total maihem in my vamware machines.
View 7 Replies View RelatedNetworking :: How To Enable Ipv6 Forwarding
Mar 26, 2011I would like to enable ipv6 forwarding . i have ipv6 module loaded.I added net.ipv6.conf.all.forwarding=1 in /etc/sysctl.conf .i tried reboot , did 'service network restart' .
.
Also I tried
sysctl -w net.ipv6.conf.all.forwarding=1
and
[code]....
