Networking :: Ipv6 Connectivity Using 6to4?
Jan 14, 2011
The goal: ipv6 connectivity using 6to4 The problem: no connectivity on some internal hosts (mixed win & debian) and no ipv6-web access on any host. Let's start with my external box. It is headless debian lenny dhcp/local-dns & cache/firewall. It has the following interfaces after a reboot:
[Code]...
My understanding is that ipv6 will auto-configure itself and that the radvd file is all that is needed by the external host to give all the ipv6 enabled internal hosts ipv6 web access. My question: How is my external host misconfigured? Or are the problems specific to the internal hosts? I am assuming that I have issues on both the external and internal hosts since some of the internals have golobal ipv6 address and some don't. I do however wish to address the external host first.
View 6 Replies
ADVERTISEMENT
May 7, 2011
Anyone who's interested in playing with IPv6 should be able to do so using '6to4' - even if you're behind a NAT device! The following steps works for me on Ubuntu 11.04 (taken[URL].. 1. Make sure the 'iproute' package is installed:
Quote:
$ sudo apt-get install iproute
2. Calculate your 6to4 address:
Quote:
$ ipv4="74.125.237.49"; printf "2002:%02x%02x:%02x%02x::1" `echo $ipv4 | tr "." " "`
2002:4a7d:ed31::1
(Replace 74.125.237.49 with the public IPv4 address assigned to you by your ISP)
[Code]...
View 1 Replies
View Related
Feb 8, 2011
I decided to try and get my network ready for IPv6. All of my hosts are set up to do stateful autoconfig, I have radvd installed and working, and I can ping6 ipv6.google.com from my Ubuntu server. However, when one of the clients on the inside tries to ping6, no packets return and I get this message in the router's syslog:
Code:
Feb 8 17:55:17 foo kernel: [ 1344.824474] Dead loop on virtual device tun6to4, fix it urgently!
View 5 Replies
View Related
Jul 22, 2009
I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies
View Related
May 7, 2011
I just finished setting up my slack machine as a home server (printers & files) and I noticed that I have an IPv6 address (from ifconfig)... I didn't know I did. I used to work in tech support and when a windows or OSx machine didn't connect properly on a LAN, disabling IPV6 was a common troubleshooting step. Is there a way to easily turn inet6 connectivity off/on in Slackware? (I want to keep the ability to get an IPv6, we will all use those in the future)
View 2 Replies
View Related
Jun 25, 2011
Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215
Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.
Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.
ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.
Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.
Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).
Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.
I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.
View 3 Replies
View Related
Aug 31, 2011
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
View 1 Replies
View Related
May 6, 2011
I've got problem with configuration of 6to4 tunnel. I do it like they do here using iproute2 HTML Code: [URL] And still I can't ping ipv6.google.com: I' ve got Destination unreachable: Address unreachable
View 1 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Dec 16, 2010
How can i check my FTP is working properly or not? or check out this connectivity?
View 2 Replies
View Related
Apr 19, 2010
I use a laptop with a built-in WiFi card (Intel PRO/Wireless 3945ABG [Golan] using iwl3945 module). It's OK but sometimes is not very stable, occasionaly it simply dies and I have to reboot. It was even worse but I improved it by applying a new driver.I also have a very nice USB WiFi card (D-Link System DWA-140 802.11n Adapter [ralink rt2870]). It's much better and faster.
So the problem is that in Ubuntu 9.10 (2.6.31) I can use only the built-in one. The other one (D-Link) also works but I can't make it connect to my router. The built-in card connects to it but the D-Link even does not list it among possible connections (but it lists other possible connections which I do not want to use).The funny bit is that this problem disappears when I use an old Kernel (2.6.28-18 ) : both cards work fine and can connect to the router at the same time (obtaining different ip's). I then disable the built-in one and happily use the external card.
Unfortunately the old Kernel has issues with sound and video, so I would like to use the latest Kernel with the external card. I tried WICD but it didn't change anything.I can add that under the old Kernel the USB card is used as a ra0 device while the new Kernel lists it as wlan1.
View 1 Replies
View Related
Apr 4, 2011
I have an issue with my Dlink DWA 547 802.11n PCI adapter, I'm under LUCID fully updated.I have no trouble connecting to any wireless but after a few minutes I'm loosing the connectivity strenght (getting ping reply from my router that vary from 2ms to 200ms). But as soon as I'm rescanning the network using the command (sudo iwlist wlan0 scan) everything is fine (constant 1-2ms ping). I'm using wicd as network manager. I have tried to schedule a job in crontab to launch every 10min a network scan command, but didn't succeed to have it working, morehover I don't think that's the good way.
View 2 Replies
View Related
Jun 9, 2010
I am installing fc12 in a datacenter that does not yet support fc12. I have fc12 successfully running on several other machines in a different unmanaged datacenter. Here is my problem. After booting the machine I run a data transfer intensive operation. I use scp to transfer a 1GB file. After some percentage, 10 to 30, the network appears to go away. No ping, ssh, traceroute, etc are successful (in or out). At the KVM console I can check the status of the network service, it indicates its up. Restarting network, turning off iptables, ifdown/ifup do not have any effect. Only a system reboot will temporarily allow network connectionifconfig show LOTS of RX errors and dropped packets.
View 1 Replies
View Related
Jan 13, 2010
Machine 1) I have a Server with RHEL5.
eth0 = 192.168.48.x (static class C ip connected to VLAN switch)
Internet available via HTTP proxy through vlan but from other main server but not from machine below.
Machine 2) I also have a Server with RHEL4.
eth0 = 124.30.XXX.xxx (public IP for availing internet)
eth1 = 192.168.60.xxx (class c ip to share internet via squid on the same LAB)
eth2 = 192.168.16.xxx (class c ip connected to VLAN switch)
Now what I want is ssh connectivity available to Machine 1, so as to enable remote machines on the internet connected. I know that it might be hard for Machine 1 to share ssh directly on the internet but if there is any kind of tool or tricks to setup pls tell. So the only chance is ssh via machine 2 then after connected to Machine 2 then again ssh to Machine 1. But how do I make ssh available online? IPtables are set correctly machine 2 can't be ping on the internet.
View 2 Replies
View Related
Mar 28, 2010
I am working on a project to build an embedded board with WIFI connectivity. My present status:
- I have a embedded development board TS7200 .
- It has USB and Ethernet Port.
- I am able to get port Linux on it and run program to communicate between devices and a computer using socket programming and Ethernet.
I need help in deciding how to get WIFI connectivity to the board. I guess it would mostly be using WIFI dongle? Any suggestion for a WIFI dongle?How should I get it working? Where should I look for proper reading material? I am am planning to do some basic program practice using WIFI on my laptop. How can I do that ?
View 1 Replies
View Related
Nov 29, 2010
I have Ubuntu 10.10 installed on my laptop. My ISP natively supports ipv6, but since last weekend, I do not get an ipv6 ip. When I use a live cd however, I do get an ipv6 ip. For as far as I can see, all settings (/etc/network/interface and the settings in network manager) are exactly the same.
Output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet addr:XXX.XXX.XXX.XXX Bcast:XXX.XXX.XXX.XXX Mask:XXX.XXX.XXX.XXX
inet6 addr: XXXX::XXXX:XXXX:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
EDIT: is there a way to let the netwerk be automatically configured as happens during installation? It would be nice to start with a clean and new set of network config files as there were just after I installed Ubuntu on my system, without a full reinstall of my system.
View 5 Replies
View Related
Jun 30, 2009
I have a problem with my ipv6 connection: although I can't get ipv6 address with DHCP, I can't use ipv6 network. I tried [URL], and the tortoise is static. I want to fix it out , so I use 'ifconfig' to see my network configuration:
eth0 Link encap:Ethernet HWaddr 00:50:8d:ef:dd:06
inet addr:210.77.9.102 Bcast:210.77.11.255 Mask:255.255.252.0
inet6 addr: 2002:d24d:b64:4:250:8dff:feef:dd06/64 Scope:Global
[code]....
Some people told me that the fisrt ipv6 address was wrong and unsuitable for ipv6 connecting. I tried /ect/init.d/networking restart but it didn't work. How can I use the second address as my ipv6 address and fix the problem out ? Now it seems there is not problem with the ip adress but the route. After watching some video, I suddenly could use ipv6. I did 'ifconfig' again and nothing was different. However, the result from the command 'ip -f inet6 route' changed: the last default route was gone and there was only one default route.
View 2 Replies
View Related
Jan 12, 2010
I have installed Bind 9.6.1 on my linux pc. I have to resolve domain name using IPv6 address. I have made following entry in the /etc/resolv.conf file code...
address of the machine on which Bind is running. The problem is that I am not able to ping open-ims.test domain name. If I use IPv4, everything works fine but how to ping domain using IPv6.
I have also made changes in dnszone file by replacing IPv4 address with IPv6 address and also changing A to AAAA.
View 5 Replies
View Related
Oct 11, 2009
I have a Fedora Linux machine and a Windows XP machine and I want to enable TCP/IP connection between them using a cross-over cable. I have a type of middleware server running on the linux machine and I want to be able to run the client for the application on the windows machine and work that way. I have heard Samba as a solution but my understanding is SAMBA is mainly for file sharing.. and is not necessary for establishing TCP/IP connectivity. Is this a correct statement? How can I go about setting up TCP/IP connectivity between the two machines?
View 2 Replies
View Related
Oct 11, 2010
May I please have some help configuring wireless connectivity?I just moved and went from connecting to a LAN infrastructure to connecting with a wireless cable modem. The modem is dual-purpose, it has two ports, one for an Ethernet cable, and an access point for a wireless connection. The ISP is CableOne. My laptop, which I use most often, is wireless capable, and I want to use the wireless feature. The laptop is running Fedora 13 KDE, with a VirtualBox virtual drive running WinXP.
I have used NetworkManager to create a wireless connection and name it. I have also used WPA encryption for this because I don't want anybody else using my bandwidth. Moreover, I have tried no encryption and WEP, all to no avail.
View 14 Replies
View Related
Mar 13, 2010
I've been trying to use the wireless adapter that came shipped with my computer for a while now (it is NOT a USB adapter; it seems built into the computer). However, I can't seem to get it working.HP says that the driver is Lite-On USB Wireless 802.11 b/g Adaptor. I am currently connecting to the internet with my netgear USB adapter (I think the driver is something like prism_usb)
View 3 Replies
View Related
Nov 21, 2010
I can see the network shares, but when I click on one of them, I get the message:Unable to mount location (header)Failed to retrieve share list from server (body)This worked fine for me in the previous versions, so I don't know what to try.On the windows machine, the share can also be seen but not permitted to connect.
View 1 Replies
View Related
May 15, 2011
I am new to linux. I just installed linux on my PC and wanted to configure wireless network connections. I have entered SSID and mode is set to infrastructure. I don't know what is BSSID do I need to enter MAC address (of router?)?I need to connect to internet wireless can you please guide me ?
View 1 Replies
View Related
Jul 2, 2011
I have a Air-CB21AG-A-k9 cisco Card and trying to run it with Ubuntu 11.04. But this card doesnt seems to be plug n play device with ubuntu 11.04. As soon I inserted the card both the leds are flickering but no wireless conectivity.
View 9 Replies
View Related
Jul 22, 2011
I've tried to set up an easy PXE server to set up ubuntu on various PC's via network. When I was finished I tried to boot a virtual mashine and later a normal notebook, both had the same problems, they find the TFTP server start booting and installing but it always fail. Reason: they get no IP from the DHCP-Server (I'm using dhcp3-server), even if I enter an IP manually I only get to the mirrow step where it tells me bad mirrow and the dhcp log says: Abandoning IP address 192.168.1.46: declined. I also rebootet the router but nothing changed.
View 3 Replies
View Related
Jun 15, 2010
I am using Suse 10 sp2. By running ifconfig I am changing the mac address. Everything is happening successfully, but this is adapter losing the network connection. Even when I give a static IP. I am not able to ping any other IP.
View 1 Replies
View Related
Dec 16, 2010
How can i check my FTP is working properly or not? or check out this connectivity?
View 3 Replies
View Related
Jan 23, 2011
I had my desktop running ubuntu 10.10 at my sisters house hooked up to a router sharing internet with her boyfriend never had a problem with it there. I moved into my own apartment this week plugged the cable modem directly into the broadcom ethernet card and couldn't get an ip or anything it wouldn't connect period so I ended up hooking it up usb which works but only at speeds of 5-7mbit when I have 15mbit connection. So I put another ethernet card in hoping it was just problem with the card and tried it that worked.
I got a connection but it was incredibly slow like getting maybe 5k a second so I open network tools in administration menu and start pinging google. While I'm waiting on a bandwidth test to complete and it takes off getting like 20mbit keeps that connection for a while then out of nowhere just drops to almost nothing. Again for a few minutes then falls off completely so I restart and it does the exact same thing starts off slow then something clicks and it works great for 5 min then nothing?
View 5 Replies
View Related
Feb 12, 2009
I have 2 cisco sw 3500xl series working properly forwarding traffic. All operations are Layer 2. I have setup keep alive 10 on all the ports. They are connected to another sw together with a Linux router on Cent OS 5.2. I can't ping the switches from the Linux box. If I arping them, I get a response and after that they are accessible for telnet. Otherwise they are not. After 5min the macs are flushed from the arp table of the Linux box, and then again they are not accessible only if I arping them, or set a static mac.
View 1 Replies
View Related
Oct 27, 2009
I'm having strange difficulties in setting a static ip for my CentOS 5.4 installation. If I use DHCP everything is fine, but with a static ip I have no network connectivity. I have done this many times with RedHat/Fedora/Ubuntu etc. with no problems and now I have no idea what I'm missing or doing wrong. I have tried to set ip as 192.168.1.20 (anything below .100 will do). GW is 192.168.1.1 and NM is 255.255.255.0. This is all I have had to use with other distros, but now when I set these I cannot even access my routers admin page or ping it (192.168.1.1). (I just did this with Vista on my other machine and all worked fine).
View 13 Replies
View Related
