Networking :: RPC Svcgssd Shutdown Failure
Jan 14, 2010I am facing problem when doing NFS mount.RPC service is not getting shutdown.
View 1 Replies
ADVERTISEMENT
Ubuntu :: Boot Failure After Complete Shutdown Or Sleep
Jan 15, 2010I have installed ubuntu 9.10 with karmic kernel and GNOME, on toshiba 512 MB RAm laptop. it worked fine but some times after complete shut down or sleep, it wont boot again. Laptop is completely dead and silent. I had to power it off, battery taken out and inserted again to get it started again. Then it worked all normal and fine. Why it happens and what i shud do next?
View 7 Replies View RelatedUbuntu Installation :: Shutdown - Restart Failure - No Sound And Unable To Mount After Upgrade
Jul 22, 2010I am using Ubuntu 10.04 on a dual-boot system with Windows 7. Yesterday I upgraded from 2.6.32-23 to 2.6.32-24. After that, pressing the shutdown button and selecting shutdown or restart (whether on the login page or after I've logged in) will only bring me back to the login page. I can shutdown or restart if I do sudo shutdown now, but I'd prefer to use the GUI. Also, there is no sound now (not a big deal, but still not good). And I can't access my storage partition (not the windows7 partition, but a third ntfs partition with data on it). I get the error message that I am unauthorized to mount. I have the only account on this computer, so I should be authorized. This one is a HUGE problem for me, because I need to be able to access my data for work. None of these were problems before the upgrade.
Oh yeah, and quickstart is not enabled. Also, if I go to Power Management, and try to alter what to do when Power Button is pressed, my only option is Ask Me. I know these have been problems/solutions to the shutdown/restart problem in the past.
Server :: Shutdown The Nodes From The Master Terminal Using "shutdown -h Now" Get Shutdown?
Dec 10, 2010I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
Networking :: Major Failure On Part Of Ubuntu Related To Networking / Fix It?
Mar 31, 2010After deleting part of the gnome config directories in order to reset gnome (GUI was messed up - No title bars, etc). I lost my bluetooth tethering to my Nokia N900. I cannot redo it as it always fails. Linking from phone to Laptop works, but cannot use it to link up to the internet then. Cable to the phone always worked up till now. Now I cannot get a connection as it stopped working after my upgrade to 11.04.
View 3 Replies View RelatedFedora :: Shutdown Policy Triggered By Vncserver - Computer Refuses To Shutdown Normally
Feb 5, 2011Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
Ubuntu :: Monitor Out Of Sync During Boot And Shutdown (also Shutdown Hang)?
Jun 30, 2010when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies View RelatedUbuntu Networking :: VPN Failure In 10.04
Jul 12, 2010I have tested it in windows and confirmed that the problem does not lay in the firewall and is just in ubuntu.
Simply what happens is I can connect, or rather network manager tells me im connected. If I leave it for approx 30 seconds it will fail.
If I open terminal services client it will allow me to connect to the server and even get passed the login screen but will just simply fail and the TSC program will crash.
below are a list of forums and fixes I have attempted. I am beginning to think that the open VPN program supplied with ubuntu is completely inadiquate (based on the number of other people with problems) and I cannot see why ubuntu comes shipped with it on CD when it clearly undermines the good work they have done to produce the rest of the OS.
[URL]
Anyway, I have tried using MPPE, refuse-eap = yes
I have tried changing EVERY single option available in the VPN properties and restarting the network after each one.
As an alternative are there any other network managers available for ubuntu 10 that anyone can recommend to avoid using the standard one?
General :: Locate Shutdown Log For Linux Shutdown (RHL 5.1-2.6.18-53.el5PAE)
Apr 22, 2010I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
Ubuntu Networking :: VPN Connection Failure
Jan 28, 2011I use a free vpn connection service to avoid filtering in Windows xp but in my ubuntu 10.10 is not working , i checked the gateway and other properties a lot of time and there is nothing wrong.
View 4 Replies View RelatedFedora Networking :: Internet Failure After Update
Feb 28, 2010After running a system update, on next boot I was unable to connect to the internet. I am running Fedora 12 KDE 4.4 x86_64 with a dsl connection. Network manager was keeping my ethernet card disabled. If I disabled NM control of the card I could manually enable it and connect to the internet, but on reboot it would be disabled again. I saw that the update did apply to NetworkManager so I did a downgrade. yum downgrade NetworkManager That seems to have fixed the problem.
Here's an interesting thing I noticed. When I did the downgrade, yum wanted to "Install" for dep NetworkManager-glib for the lower version, however didn't do anything to the same file on the latest version. Almost as if it wasn't installed. Now, with the downgraded version as current, yum wants to update both NetworkManager and NetworkManager-glib to the latest version. I couldn't swear to it, but I think the original update to NetworkManager did not include the *-glib dep, but now it does. Maybe that was the problem all along?
Ubuntu Networking :: Failure To Connect To Internet
Jul 12, 2010I got a netbook, used, and I installed Ubuntu Netbook Remix on it. This is my netbook :
Quote:
Product Number VA715UA#ABA
Microprocessor 1.60GHz Intel Atom Processor N270
Microprocessor Cache 512KB L2
Memory 1024MB DDR2 System Memory (1 Dimm)
Memory Max 1024MB
[Code].....
I was fine to get on the internet when it had Vista on it, but now the wifi light is always 'on' no matter what I do, yet Ubuntu can't even acknowledge it HAS wifi, let alone connects. I'm at a total loss here, and I need this up and running.
I've found a lot of people with similar issues, but none of those solutions has helped. My Ubuntu 'fails' packages all the time (tells me they don't exist!) and I don't know what to do with it. I'm a Windows user (born and raised) and speaking Ubuntu is not coming naturally to me.
Ubuntu Networking :: 9.04 Wireless Card Failure?
Aug 16, 2010I have an IBM Thinkpad running Ubuntu 9.04. I just went on a trip and used the hotels wireless internet with no problems. I get back to my own wireless network and not one wireless connection comes up. My other computers get the signal just fine. I have rebooted the computer as well as tried an Ubuntu Live Cd to see if it was just my settings. Nothing is working and it can't find the networks. Does this mean that my card is dead because it was just working a few days ago...?
View 1 Replies View RelatedNetworking :: Failure Of Internet Connection Through Fedora 8
Feb 26, 2011I can't connect internet using ADSL modem of bsnl.I am new user of linux(fedora8).To do so I go through system>administration>network configuration and trying to activate xdsl modem and ethernet but unfortunately ethernet does not seems though there is a ethernet card.Here it should be mention that in my windowsXP partion there is no problem for internet connection.so what can I do next?
View 1 Replies View RelatedNetworking :: How To Diagnose VPN Connection Failure On Fedora 12
Jun 4, 2011Using a set of instruction given to me, I was able to set up a Macintosh system running Mac OS X to successfully connect to a virtual private network.I then tried to adapt those same instruction to configure a system running Fedora Linux 12 on an Intel Core2 Duo system.However when I try to connect using the NetworkManager Applet, I get an error that saying the VPN connection failed, with no clear indication of what the actual problem is.What can I do to troubleshoot this problem and find out why the connection is failing?
View 1 Replies View RelatedNetworking :: Implementing Fault Tolerance For LAN Failure?
May 20, 2011is there a way to implement fault tolerance in case of LAN failure on SUSE 10 sp3 i.e. if 1 LAN port fails then the 2nd LAN port should take over ..
View 2 Replies View RelatedNetworking :: Udev Failure With Multiple Interfaces
Jan 7, 2011 I have got a problem in the configuration of the network for my Linux box. The distribution is Slackware 12.2 with the 2.6.27.7-smp kernel. There are three ethernet NIC, one on the motherboard with Atheros AR8121/AR8113 chip and two on PCI card which with RealTek 8169.
I installed the module for Atheros which is the atl1e.ko and I defined the configuration for the three NICs in /etc/rc.d/rc.inet1.conf.
When I hit the commend ifconfig I see all the three interfaces eth0, eth1, and eth2, but the address are not distributed between the NICs as I'd like so I thought to resolve the inconvience with udev, but I don't know how to proceed because there is a strange situation.
If I control the file /etc/udev/rules.d/70-persistent-net.rules I see a strange situation: Once the file contains nonly a line for the Atheros NIC but if I reboot the system there are the two lines for the two RealTek NICs and everytime the system is rebooted there is a change between these two alternatives. A detail I noted is that the two modules atl1e and r8169 are both always loaded, so udev has always the chance to detect the hardware but for some reason that I don't know something goes wrong. Another related problem that bothers me is the absence of udevinfo and udevtest. Have I perhaps to reinstall udev?
Ubuntu :: Can't Shutdown Without Running Sudo Shutdown
Jun 20, 2010I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies View RelatedUbuntu :: Randomly Pop Up The Shutdown Menu And Then Shutdown?
Sep 7, 2010Ubuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
Ubuntu :: Shutdown Command Like Shutdown Button?
Dec 10, 2010looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies View RelatedFedora Networking :: Failure Connecting VPN To Corp Network ?
Jan 12, 2011I am running fedora 14 and have tried to setup VPN access to work. I used the simple networking GUI program. Another engineer at work uses ubuntu and that is how he accesses the VPN. I think that I did everything right but get this generic 'VPN connection failed' message. I am trying to connect to a monowall firewall and have the IP address. Yes, I have an account but am just trying it for the first time. I turned on all of the options available which seemed correct based on the instructions that I had. I have contacted my sys-admin to try to find out what the monowall doesn't like. However, I am wondering if I might need to open an outgoing port on my linksys home router/firewall and, if so, which one?
View 2 Replies View RelatedUbuntu Networking :: 910 Hp Pavilion A6750F Internet Failure?
Mar 14, 2010I just installed that latest version of Ubuntu on to my HP *a6750f Pavilion PC. I am using my wireless card on it. When i use the internet sometimes it will work for awhile but then it won't. So my internet keeps cutting in and out. I am not being diconnected from my router though. Internet is working prefectly fine on my other computers running windows seven and ubuntu.Here is my information
------------lspci code returned
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Hewlett-Packard Company Device 9602
[code]....
Ubuntu Networking :: Sudden Failure To Connect To Router ?
Dec 18, 2010I was connecting to the internet with no problems at all until two days ago. a while back I set my local IP to #.#.#.11, the internet failed.
Code:
I removed the added code from /etc/network/interfaces and the internet started up again, however the card retained the .11 IP address and has done through many installs... Don't know why or how, probably just a router DHCP setting not retiring the IP of machines.
That wasn't a problem as far as I know.
Ok, so I check a wired connected win7 pc and an ipconfig /all shows he's got the #.#.#.11 address. Checked a wireless win7 netbook and it got a #.#.#.24 address
Wireless key double checked and is correct.
I'm now on my WinXP partition (dual boot with the same ubuntu install that won't connect to the internet) it's getting the IP #.#.#.5 and is connecting with no trouble(albeit slow windows)
All machines are set to automatic configure, but obviously retain the same ip for a while.
I've tried
Code:
iwconfig show that the wireless card is indeed wlan0
Here's basic information
Code:
Wireless card on non-connecting machine: Belkin N+ wireless card, v2001, NDISWRAPPER
will this work?:
Code:
The problem is that if I try and connect to the router it does the "connecting rotating circle" and then just either has a message "disconnected from wireless" or asks me again and again for the WPA key, which is already correct.
LiveCD and fresh install both fail, used ndiswrapper and it's always worked fine before.
using Ubuntu 10.04
How I can get connected again? This is a desktop, a wired connection is just NOT possible.
Ubuntu Networking :: Failure To Make Rt2570 Driver
Jan 18, 2011I am inquiring about an error i have run into when i tried to make the driver "Ralink 2750 usb enhanced drvier". I downloaded it from this site [URL]... My wifi card according to lsusb is a 2570 Ralink Technology, Corp. 802.11g WiFi. I extract the package inside my /home/user/Downloads directory, using tar -xvf /home/user/Downloads/rt2570-k2wrlz-1.6.4.tar.bz2 That works fine and extracts the file, but once i change the working directory to /home/user/Downloads/rt2570-k2wrlz-1.6.4/Module and run the 'make' command, i receive the following error.
[code]...
Ubuntu Networking :: Refresh Network After Power Failure On Laptop?
Apr 24, 2010have Karmic Coala runing on an IBM thinkpad X.41. Works great. My home network is all ethernet so I have a router , CAT5 cable to laptop.A coupleof times I've had power outages The laptop carries on as it's on battery power. When the power comes back , the router restarts, it reconnects after a few minutes but the laptop doesn't reconnect to the network seamlessly. On some other Linux distro's I've had running /etc/init.d/network restart will refresh everything. On Ubuntu I have /etc/init.d/networks but running restart In the end I needed to reboot the laptop to get the network back on.Perhaps this is a power management issue with the laptop ethernet card i.e losing power powers down the card and it never comes back up properly.
View 2 Replies View RelatedUbuntu Networking :: Failure To Connect To Internet Occurs Only At Home?
Aug 14, 2010i have a problem connecting to the internet at home, but have no problem connecting to the internet in other places. My computer connect ot the router but does not receive aconnection to the internet form the router. this happens both wireless and ethernet. at the same time everybody elses computers (using windows) connect to the internet in my home. i have tried switching between two wireless cards, had the same problem. this makes me think it has something to do with the router itself. i use a Planet WRT-413 router.
View 9 Replies View RelatedUbuntu Networking :: Lucid PPTP VPN Failure Connecting To MS Server
Sep 10, 2010I'm attempting to get 10.04 to connect to an SBS 2003 pptp vpn server, but for the life of me have been unable to find or implement a working solution. System previously had 8.x and 9.x and had no difficulty connecting to same server, but on a fresh install of 10.04 cannot connect.
tail -f /var/log/syslog shows the following:
Code:
Sep 10 15:19:32 ubuntu NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 10 15:19:32 ubuntu NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
Networking :: How To Make Nslookup Return Failure If DNS Server Fails
Mar 23, 2011I'm trying to find a command to tell nslookup, "I want you to try to resolve hostname X using DNS server Y, and if the lookup fails, just output failure do NOT fail over to some other DNS server as a backup and use it to try to resolve the same hostname."I'm trying to follow the man page instructions for doing this, but it doesn't seem to work. The man page for nslookup on my system (CentOS 5.5) includes the line:
"[no]fail Try the next nameserver if a nameserver responds with SERVFAIL or a referral (nofail) or terminate query (fail) on such a response."But if I try using that option, the output seems to indicate that after the lookup failed on ns1.afraid.org, nslookup failed over to 208.67.220.220 (the first nameserver listed in my resolv.conf -- an OpenDNS nameserver) and used it to resolve the hostname instead.
Fedora Networking :: Wireless Gone After Low Battery Shutdown
Dec 30, 2009Broadcom 4312, dell inspiron 1545.Earlier i was running on battery power and the laptop shut down when the battery got low. When i got back to it and restarted there was no wireless network. It's grayed out and says wireless disabled. How do i fix this?
View 1 Replies View RelatedUbuntu Networking :: How To Shutdown A Buildin Wifi
Mar 13, 2010I have a acer laptop with a buildin WiFi now i wan't to use a pcmania WiFi modem but when i connect it i get both modems who connect to the network. One modem is wlan0 and the other one is wlan1 How do i shutown mu wlan0 permanent i can turn it off with iwconfig wlan0 down but when i start up it is up again
View 4 Replies View Related
