I have Dell D400 Laptop with Open SUSE 11.0 installed on it. I have to configure LAN through UTP cable with my WiMax Device. Is there anybody who could guide me through this configuration?
View 2 RepliesI just deleted the suse kernel-default by yast2 accidentally and rebooted the suse11 box,how will I install the kernel in suse11 rescue mode from the suse11 dvd ?
View 2 Replies View Relatedworking and installation of External usb modem , dialp , DEll d400 ( in vostro 1510 )
View 8 Replies View RelatedI am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I'm trying to boot Live Debian (on a usb stick) on a Dell XPS ('Developers Edition' aka 9343). From what I've read about the status of on this hardware [URL] and about Debian Live (https://www.debian.org/CD/live/) it sounds like this may be possible, but I haven't figured it out. I don't know how to deal with the bios &| uefi settings.
I created the boot stick with dd if=debian-live-8.3.0-amd64-mate-desktop+nonfree.iso of=/dev/sdd1 bs=4M; sync
Im running the latest Debian version, 6.0 on my Dell Mini 9.Webcam and sound work, but microphone is a no-go.In Alsamixer (1.0.23), I have Capture, Digital, and Mic settings all the way up. There are no options for adjusting "Front" mic settings. (May have been for older alsamixer versions?)In Sound Recorder, playback has loud noise/feedback? I'm not sure how to interpret the above, but I am just trying to offer as much relevant background information as I can.I've been scouring forums for the answer, but to no avail. Most questions/answers are from 2008, and couldn't find a solution. I'm not very handy with the Linux machine, but love to learn / am learning.
View 14 Replies View RelatedSo I've got a Dell Poweredge R410 with SUSE Linux Enterprise Server 11 installed and my boss wants me to configure it like this:
Eth0 - No IP address (on general tab, activation set to "never")
Eth1 - No IP address (on general tab, activation set to "never")
Eth2 - No IP address (on general tab, activation set to "never")
Eth3 - No IP address (on general tab, activation set to "never")
bond0 - eth0, eth1, eth2, eth3 selected (Activation set to "On boot") No IP Address
bridge0 - bond0 selected (Activation set to "On boot"). IP, subnet and hostname defined.
The DNS and routing has all been set correctly. The problem is when I set the network configuration as above I cannot connect to the network I'm unable to ping the gateway. I only have 1 cable connected and it's plugged into eth0 but apparently this doesn't matter. If I delete the bond and bridge and instead apply the settings to eth0 it connects no problem but my boss wants to use load balancing and states that that setup should work.
I've installed Debian on a Dell Latitude C600 and I've managed to get all of the hardware functioning except the WiFi adapter. The laptop is using a Netgear WG511v2 PCMCIA interface. I've extracted the WG511v2.INF and WG511v2XP.SYS files and I believe they are successfully installed using NDISWRAPPER.
The WiFi adapter's green LED flickers and the yellow LED periodically flashes, which would seem to indicate that the adapter is attempting to connect to a network.
I believe the problem that I'm having is related to configuring the wlan0 interface with the proper security credentials to attach to the WiFi network. I'm using WPA2 with AES for encrypting. The key is 64 hexadecimal characters.
how to configure the wlan0 interface with the proper security credentials. The Network Manager applet only offers WPA2 Personal as a configuration option.
I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.
I have installed the b43 firmware and after that everything seemed working but just for a few seconds.
I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.
I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.
I can easily use my wifi with my smartphone too.
First issue is, now that I am running Debian "Squeeze", my laptop runs much hotter than before. Its definitely hot on the very bottom compared to when running Windows. Once the system begins to heat up, the fans start spinning faster, the system gets louder, etc.
Second issue is battery life. I am able to get 5 hours out of the laptop in Windows, but maybe 2.5 hours in Debian. I am assuming that these two problems go hand in hand. Now from experience with PC hardware, I know that the newer chips scale their frequency and voltage depending on demand. I don't think the computer is doing this correctly when running Linux.
By running
cat /proc/acpi/processor/CPU0/throttling
I see that the CPU(s) are in T0 state (or 100%). Manually setting the frequency doesn't change anything either (via the gnome applet). Am I diagnosing this correctly?
I am still a noob with linux and debian in particular. I do some android development so through that I have learned a little bit about linux but only the basic command prompt commands and the basics of how linux works and such.Anyways, I was looking around on the forum and on other forums and I couldn't find any helpful information about how to set up wireless connections (such as wifi) on debian. When I installed debian on my computer it asked me for the ipw2200 files and I didn't have them at the time but now I have the latest framework files for that, I don't really know how to install them and after I install them I don't know how to turn on my wireless connections from there.
I am really sorry if someone already made a post on this subject and I am just too clutzy to find it, if that's the case please just post the link to that thread for me cause I'm dumb as crap.So basically the main problem I am trying to fix right now is that I cannot get my internet to work on my old dell inspiron 6000 laptop which I am trying to get to run debian.
Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
I'm using Dell Latitude D620 notebook,with Squeeze amd64.This is the output of lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated
[code]....
today I upgraded my 11.2 system to KDE 4.4.2. Basically this works. However there are two questions I was not yet able to find a useful answer for:
- 4.4.2 offer strigi desktop search. The index process started and probably did its job but how can I start a search. I found a hint that dolphin can be used, but here I do not find any Menu entry that opens a search dialog (except for the standard file search window). What I found was settings->Toolbar and there I could add a search bar into dolphins toolbar. However this search bar only appears in this one window, if I close it and open a new dolphin window it will not appear again (probably a bug). Any other way to start a strigi based desktop search?
- Again in dolphin I sometimes see strange folder icons for the folders in my home directory. Basically this is the default folder icon and after waiting a while all the icons change in that inside the regular folder icon a gray rectangle is displayed a the lower left side. No idea what this is good for. I goes away if I reload the folders content and then again after a while those strange icon appears again. It does however not appear for folders in eg /tmp only for /home which is on my system a NFS mounted filesystem.
I add http://ftp5.gwdg.de /pub/opensuse/repositories/ always error :A valid domain name consist of
View 2 Replies View RelatedI am Running on OPENSUSE 11.3, Apache 2.2.15 with PHP 5 and MYSQL 5. I have done complete configuration as written but still my PHP pages are being downloaded instead of being parse by Apache. What is wrong with my Configuration. For Reference i am mentioning my httpd.conf and php5.conf
httpd.conf
#
# /etc/apache2/httpd.conf
[code]....
I am having a hard time getting repositories to install and even some applications. Do I use yast to install RPM's aned what about if the file is a zipped up tar file? If you are familiar with VMware, can we play cd's, rip them and burn and so on?
View 1 Replies View RelatedI have installed openSUSE-11.3 in my system.But the problem is when the load of the system is little bit higher the getting black and the performance of the system is totally decreasing and the at that time the system is also going to struck.
View 9 Replies View RelatedI set HTTP proxy: http://10.*.*.*:6666/ choose Use the same proxy for all protocols fill my user name and password An error occurred when testing:
* Port number too large: ****** (password number)
curl: (3) Port number too large: ****** (password number)
* About to connect() to proxy 10.*.*.* port 6666 (#0)
* Trying 10.*.*.*... % Total % Received % Xferd Average Speed Time Time Time Current
[code]....
I have setup pxeboot server on centos 5. I want to install suse11 on client machine by this pxeboot server. How will I do this ?
View 3 Replies View RelatedI am having some trouble getting a VNC session to a new OpenSuse 11.2 32bit machine I have just installed.Fresh off the DVD, tried under KDE4 and Gnome with the same result (each time a fresh install).In YAST, I enabled remote administration, open the firewall ports, and then try and connect from remote client (in this case I have tried RealVNC from windows, and krdc from a Suse 10.x client and via HTTP) all result in the same blank black screen (http does get an X cursor echoed on the screen)
View 3 Replies View RelatedRunning:
Suse11.4 (Celadon)
Kernel Linux 2.6.37.6-0.5-desktop
Gnome 2.32.1
I've just followed the instructions at SDB:Skype - openSUSE again, as before. The install didn't start automatically when the download finished so I used package installer. Skype appears to start normally, before promptly closing itself after about 3-5 seconds. When running it from terminal, I get the message:
Inconsistency detected by ld.so: dl-open.c: 582: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed! Code: rpm -q libasound2-32bit xorg-x11-libXv-32bit xorg-x11-libs-32bit libqt4-x11-32bit libpng12-0-32bit skype
[Code]...
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download.
It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same. I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall issue.
[Code]...
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download. It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same.
I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall
[Code]...
I am running suse11.3 32 bit, and have installed squid3.
As far as I can tell it's not been compiled with ipv6 support.
Or have I missed some option in some file somewhere?
how to edit/create modules.dep.bin under initrd image. I actually want to insert a new module within the initrd image of suse 11 with sp1.
View 1 Replies View RelatedI'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies View RelatedRecently, I downloaded openSUSE 11.2 DVD.I read here (Partitioning/Install Guide) that GRUB may not dual boot correctly with windows: It should be said that grub does not always get the settings to boot Windows quite correct and you may later have to adjust the /boot/grub/menu.lst file in your Linux installation
Is it true also for the openSuse version (11.2) that I downloaded? Please refer to Windows 7.
My laptop is a Medion MD 96970 (bought at Aldi in September 2008) with
- graphic card nVidia GeForce 9300M G
- processor Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
- 82801H (ICH8 Family) HD Audio Controller
- 3GB RAM and 300 GB memory
1) Originally, my laptop came with Windows Vista. Then I got a SUSE linux 11.0 CD, let it make a partition and installed Suse 11.0. Since Suse11.0 isn't updated any further I would like to change to Suse 11.3 (or whatever is newer). How should I proceed? (I can't find my old Windows Vista CDs and would like to KEEP THE PARTITION, thus formating all isn't an option)
2) In order to make a backup I bought a portable hard drive from iomega (USB 2.0). Then I noticed that it is formated in NTFS. SUSE 11.0 doesn't seem to like it --- what should I do? Can I reformat it somehow?
3) Suse 11.0 doesn't like my sound card. Thus I couldn't Skype or listen to music --- do you know if this problem is solved under Suse 11.3?
Can tata photon plus(HUAWEI EC1261) be used on opensuse 11.3..? i am trying to install but not able to do..details about installing and configuring..?
View 3 Replies View Related