Debian Configuration :: Netgear WG511v2 On A Dell Latitude C600
Apr 1, 2010
I've installed Debian on a Dell Latitude C600 and I've managed to get all of the hardware functioning except the WiFi adapter. The laptop is using a Netgear WG511v2 PCMCIA interface. I've extracted the WG511v2.INF and WG511v2XP.SYS files and I believe they are successfully installed using NDISWRAPPER.
The WiFi adapter's green LED flickers and the yellow LED periodically flashes, which would seem to indicate that the adapter is attempting to connect to a network.
I believe the problem that I'm having is related to configuring the wlan0 interface with the proper security credentials to attach to the WiFi network. I'm using WPA2 with AES for encrypting. The key is 64 hexadecimal characters.
how to configure the wlan0 interface with the proper security credentials. The Network Manager applet only offers WPA2 Personal as a configuration option.
View 2 Replies
ADVERTISEMENT
Feb 23, 2010
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
View 2 Replies
View Related
Jan 30, 2010
Ive been trying to install Fedora 12 on a Dell Latitude C600, (Pentium III 750/600 MHz; 256 MB RAM; 250 KB Level 2 Cache; 8 MB Video Memory; ATI M3 Video Controller) Downloaded iso files from Fedora Project, Verified integrity with sha256sum.exe, burned to 5 CD's. Disc's 1 & 3 failed Linux test at installation. Burned Disk 1 twice more and still fails. Went ahead with installation. Chose to Use all of the 20 B hard disk. Would not install via graphical. Finished after Disk 1. After re-starting computer and logging into root, only get CLI operability and can't seem to get a GUI. I'm new to linux - just thought I'd put this laptop to use to familiarize myself with it.
View 3 Replies
View Related
Jan 11, 2011
am running ubuntu 10.10; Laptop see others network but its can't connect to my network. This card work under Windows XP.
View 1 Replies
View Related
May 23, 2011
I'm using Dell Latitude D620 notebook,with Squeeze amd64.This is the output of lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated
[code]....
View 2 Replies
View Related
Dec 17, 2008
Running HH on a little Toshiba Satellite something-or-other laptop (I want to say A25, but who knows), Verizon FIOS router (wired and wireless).
NetGear WG511v2 adapter is so close to working...
Didn't seem to want to work with ndisgtk, so I ran ndiswrapper from terminal, using driver folder I copied from my Win2K partition.
(Had to do a cp WG511v2.sys WG511v2XP.sys, as the .inf file referred to the latter, but such did not exist; cp seemed to do the trick.) And now, survey says:
Code:
Code:
Code:
In "Network Settings", the card detects a few wireless networks (including my own in-home router). Status LED flashes constantly (which I interpret to be hunting), and every several seconds, it goes solid while activity LED flashes a few times (which I interpret to be finding a network, attempting communication), then activity LED ceases to flash and status LED goes back to flashing (which I interpret to be failing and going around again). Using DHCP, just like the other computers that connect without incident.
I have entered my WEP every way I can think of. The dialog lets me choose WEP ASCII or WEP hexadecimal; I have entered the key in all caps and in lowercase, as ASCII and as hex, have entered 0's and O's where applicable. No combination seems to allow it to actually communicate with my router beyond getting rejected. My other laptop and PC (and this laptop, when running Win2K) all connect just fine; none of them use WPA-type passphrases, so I assume that's unnecessary from Ubuntu. Roaming mode gives the same results as described above.
View 5 Replies
View Related
May 6, 2011
Ever single thread i have read about this network card and trying to get it to work with Xubuntu has not worked for nothing. I got the NDISwrapper install and what not and a driver but nothing is working. i have no idea what to do i cant get the card to turn on or scan or anything.
View 3 Replies
View Related
Nov 16, 2010
I'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
View 6 Replies
View Related
Nov 20, 2015
I just installed Debian jessie on my Dell Latitude E6410 using the UEFI install. No everything went well during the install, but after the install the first boot i ran into an issue that the laptop will not boot.
When I go in to the boot menu of the Dell Latitude E6410, I see that debian has created a uefi name (Debian)
When I select this, it boots without any issues. After again a reboot again, no luck still a black screen during the boot.
Seems that the only option to get my laptop booting is by pressing F12 and select Debian in the UEFI boot of the laptop.
Is there any way i can get my laptop to boot Debian directly from UEFI, without having to press F12?? (Also disabled all legacy devices to start up but no luck)...
- Debian Jessie X64 (Using 32/64 network install, via USB)
- Dell Latitude E6410 i5 (1280x800 intel graphics) latest bios A16
- SSD drive (Samsung 470 series)
- Debian is the only OS installed
View 1 Replies
View Related
Feb 8, 2011
My Dell Latitude D820 had lenny installed and working fine. I did not have anything exotic installed (other than perhaps nividia drivers). I went about upgrading to squeeze following the notes/documentation on the debian web site. During this process it mentioned that the following firmware was not going to be installed (as it is not freeware; BTW I had non-free in my sources.list):
tigon/tg3_tso5.bin
tigon/tg3_tso.bin
tigon/tg3.bin
On reboot it was clear that the new kernel was not in a healthy state. Even when booting with older kernels I had serious stability issues. After about half a dozen reboots trying to resolve problems I was experiencing the laptop would not even load the Dell splash screen on power up. I could not even navigate into the BIOS. Nothing appeared on the monitor (or external monitor).
I put an ISO disk in the DVD drive to see if it would boot from the DVD; it seems to load but absolutely nothing appeared on the screen. I tried navigating the grub menu (not displayed) and load my windows partition. When it booted to the point where windows would normally display the GUI it flashed several times and displayed a 'BSOD' with the following message:
*** Hardware Malfunction.
Call your hardware vendor for support
NMI: Parity Check / Memory Parity Error
*** The system has halted ***
It looks like my laptop is now FUBAR. It is out of warranty so any fix is likely to be DIY. Any ideas on how to resolve this?
View 1 Replies
View Related
Aug 17, 2010
I'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
1. aptitude install xserver-xorg xbase-clients xfonts-base xterm
2. aptitude install kdebase kde-i18n-pl
3. aptitude install kdm
4. reboot
5. problem occurs
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
View 4 Replies
View Related
Mar 18, 2011
Ethernet is not detected with the following setup:
OS: Debian Lenny
Laptop: Dell Latitude D600
Ethernet adapter: Broadcom 57xx Gigabit Integrated Controller
Wifi adapter: Broadcom BCM4309 802.11a/b/g
Have done the following troubleshooting suggestions from around the www:
LAN controller is enabled in BIOS
dmesg | grep eth0 returns nothing
lspci -v | grep -i net shows wifi adapter but no ethernet adapter
ifconfig -a does not show eth0
ifconfig eth0 up confirms ERROR while getting interface flags: No such device
Have done lsmod, but not sure what I should be looking for.
I would post lspci, dmesg or any other output, but as the adapter is not being detected, I have no network/internet connection from that laptop, have only one other Windows based (at this stage) laptop that I am using to write this message, and so would have to type out the output manually.Adapter indicators are both on when laptop is powered up. Am unsure if the ethernet adapter has somehow gone to sleep, and if so, unsure how to wake it.Perhaps the ethernet adapter is defective, but am hoping to confirm this before looking for a workaround/replacement.
View 14 Replies
View Related
Sep 27, 2015
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
View 3 Replies
View Related
May 25, 2011
I have just setup a debian box, and I want to be able to login to the machine remotely.Currently I have the following setup:Cable Modem -> Netgear Router (DHCP to outside world) -> Debian Box (DHCP for internal network)As I under stand it I have to set my Debian Box to use a static IP, but from there I di not know where to go.Also since my cable modem IP is dynamic, is there some way to have that the debian box get the IP address for the outside world, and e-mail it to my gmail account when it changes, or least every X hours?
View 1 Replies
View Related
Nov 12, 2009
I'd really like to start using Linux, but I don't know much about it. I tried installing Mandriva One 2010, but it apparently isn't compatible with my laptop. Does anybody know what would be a good distribution to use with an old Dell Latitude CPx? I'd like to get a free bootable CD one for starters, if possible. I mainly would like to use it for surfing the Web.
View 9 Replies
View Related
Mar 10, 2010
New to GNU/Linux community. Have Dell Latitude C800 I picked up for $5.00 @ garage sale. Windows XP currently installed works fine, but looking for optimal Linux OS for this unit. Tried installing SUSE 11.2, Gentoo, Freespire, Debian, Vector, Knoppix & Ubuntu w/o satisfactory results. Any suggestions from you good folks w/experience? I understand Slackware might do the trick, but remember I'm a newbie. :-)
View 5 Replies
View Related
Jun 2, 2010
After someone messed up the computer by putting XP half ass on it, it was built for windows 98 se. Now that i am working with an unformated hard drive. It doesn't like Ubuntu, Kubuntu, Windows NT, so I need to start somewhere and I need the answer fast, so i need to know what is the best linux distro for it. it is a Dell Latitide CPT c.
View 8 Replies
View Related
Jul 29, 2010
I just received my brand new E6410 laptop, which have i5 processor and wish to install ubuntu 10.04 on it.
I am wondering which should I choose: 32-bit or 64-bit?
View 4 Replies
View Related
Jun 19, 2011
I resued a Dell Latitude CPi D300XT that was getting tossed and have XP on it running a little slow but decent for basic web surfing. I saw a ..... video of someone that had Ubuntu Minimal with LXDE running on it. I could not find that but tryed Puppy Linux, Damn Small Linux, and Ubuntu 9 to 11.04 CD's in it and could not get them to to boot into the CD. I even just set the Dell to only boot from CD/DVD and would not boot any of them.
Does anyone know which Ubuntu or Linux distro I could try on a Dell Latitude CPi D300XT? The specs are Intel Pentium II 300 MHz, 256MB of RAM and 20 Gig Hard Drive.
View 5 Replies
View Related
Jul 5, 2010
refer to this and let me know if I can get this working
[URL}
View 2 Replies
View Related
Oct 22, 2010
we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine.since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x.But, we do not manage to enable the touchscreen, neither the vga graphic drivers.
View 1 Replies
View Related
Apr 22, 2010
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
View 3 Replies
View Related
Aug 13, 2010
The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.
View 9 Replies
View Related
Oct 30, 2010
I've installed Ubuntu 10.10 Netbook to my sisters laptop (Dell Latitude C640) but there appears to be a problem with the screen going black then opening the primary window, then loading the sidebar and then going black again.
For example, I'll hover over the new bar on the left and it'll just disappear, the screen will go black then will suddenly come to life again and then disappear, go black and so on. It just cycles through that.
View 3 Replies
View Related
Jul 8, 2011
I just installed 11.04 on my Dell Latitude D620, and I'm not able to get an Ethernet connection. (Which in turn means I can't get wireless drivers.) Whenever I plug in an ethernet cable to the port and select auto eth0, the networking icon on Ubuntu's status bar flickers between the obtaining wifi animation and a spinning cursor. In a couple minutes I get the "wired network - disconnected" message.
View 1 Replies
View Related
Jan 26, 2010
Am pposting in here cause its my understanding gos is a part of the ubuntu family sorry if i am wrong. Anyway i have a dell latitiude d610 which am wanting to run Gos on currently i dual booting but keep finding myself going back to windows as I cant get my wireless working in gos any ideas please anyone
View 4 Replies
View Related
Apr 7, 2011
A friend lent me their Ubuntu book but I can't understand it and could not find anything about the sound suddenly going from the speaker on Monday night. I went to Sony Ericsson's site to check something on my account and loud music suddenly started blaring out so I pressed the Fn button and End which muted it. However, I forgot to take it off before closing down for the night and as of Tuesday morning I have no sound. Would me leaving mute on all night have screwed something up or has it just suddenly gone? I am so upset as I cannot afford to get another laptop as not working and this is my last resort since my original Compaq one died.
I appreciate any "Helpful" solutions. Not in techy but layman's terms please as I won't understand. Also if you do reply, I am in the UK and also don't get notifications so I am not being rude if I can't get back to you quickly. I will be going to bed now.
View 5 Replies
View Related
Mar 30, 2010
Just did a fresh install of F12 on the D600, and a couple of problems. The network was working during the install, but after does not see ethernet nor wireless.
The only straying I did from a default install was to manually create partitions, making one for swap and the rest is / on ext4. Seemed fine installing and booting.
Also the touchpad and mouse settings are messed up, buttons reversed, click events from the touchpad showing "clickdown" but not acting as if the click was released.
ONE BIG COMPLAINT: I see selinux doesn't come with an easy way to disable. How is it disabled with F12?
For now I'm in a hurry, so I'm going back to F11 - past OS installing and booting ok include Ubuntu 8.04, 9.10, F5, F7, F9, F10 and XP to name a few.
View 3 Replies
View Related
Jan 11, 2010
I have recently installed Ubuntu 9.10 but am unable to connect to any of the wireless networks. Network manager does not shows any of the available wireless networks and upon clicking the network connection icon, under Wireless networks category it shows "Device not ready".Following are the results of some of the commands :
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[code]....
View 8 Replies
View Related
Jan 10, 2011
I'm trying to install the magnificent ubuntu 10.10 on my brand new Dell LATITUDE E5510. The installation works fine. I installed it with a working internet connexion ... so the drivers should be there. Then when booting, the GUI does not start I get the console instead...
I tried several things:
- run startx --> I get a blank screen where even CTRL+ALT+F1 does not work anymore
Code:
sudo dpkg-reconfigure -phigh xserver-xorg
--> just returns without anything on the screen, no error no nothing
- run in failsafeX mode, I get:
Ubuntu is running in low graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure them yourself.
Then I get the login page but it doesn't go any further, when I type my login/password it comes back to the login page...
When I do:
Code:
lspci | grep VGA
I get :
VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev02)
That's all I could see... apart from that I'm not getting any error messages and I'm really stuck.. I'm running on intel Celeron 32 bit, I have checked the checksum of my CD...
View 8 Replies
View Related
