General :: System Not Connected With LAN By Cross Over Cable / Fix It?
Dec 1, 2010I have linux system which receive data from other system having linux OS in that also. but i cannot send data on other system.
View 2 Replies
ADVERTISEMENT
General :: Connecting Two Pcs Via Cross Cable?
May 5, 2011I want connect my two Linux PCs running in 2.6 kernel via cross over cable. To do this I have done the following settings after a Google search:
In PC1
ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up route add default gw 10.10.11.13 eth0 (default gateway which is ip of pc2 )
In PC2
ifconfig eth0 10.10.11.13 netmask 255.255.255.0 up route add default gw 10.10.11.16 eth0 (default gateway which is ip of pc1 )
Then i tried pinging i could not able to connect.Are these above settings enough or any thing am i missing?
For your more information
In PC1
ifconfig output
eth0 Link encap:Ethernet HWaddr 00:16:76:A1:33:37
inet addr:10.10.11.16 Bcast:10.10.11.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fea1:3337/64 Scope:Link
[Code].....
General :: Connect Redhat To Window Xp By Cross Over Cable?
Sep 18, 2010I have two desktop one have rhel 5 and other window xp i am trying to connect both with cross over cable.IP for windows system is 192.168.0.1 IP for linux system is 192.168.0.2 I am able to ping my linux system from windows but unable to ping windows system from linux.
View 4 Replies View RelatedGeneral :: Find Blackberry Connected Via USB Cable?
May 29, 2011I just connected my BlackBerry to Linux via USB cable. How do I know which device in /dev it actually is?
View 2 Replies View RelatedNetworking :: Connect Two Pc By Cross Cable In Ubuntu?
Dec 21, 2010How can connect two PCs that both of them have ubuntu by cross cable?
View 4 Replies View RelatedSlackware :: Share Internet Via Cross Cable?
Jul 5, 2011i have 2 laptop first one run fedora14 and Second run slackware 13.37 can i share internet via cross Cable?
View 8 Replies View RelatedGeneral :: Net Boot From Debian Server Using Directly Connected Ethernet Cable
Jun 23, 2011I have a computer with grub installed, and nothing else. I'd like to install Debian on it without having to burn a CD. (and I don't have any flash disks.) It has a nice ethernet card, and I have another computer right next to it with an ethernet card. I also have an ethernet cable. However, I don't have any router free which I can mess with for these purposes. As I've looked up, apparently modern Ethernet cards don't need crossover cables, normal cables will work for this type of connection.
I've tried several different "tutorials" on how to set up a netboot server, but
None of them are complete. All of them assume that you understand how DHCP works, and that you can do things like set up a dnsmasq server. I don't understand the DHCP protocol, with submasks and whatnot (I know that it is the protocol for assigning computer network addresses, and that's it), and I don't think I should have to in order to simply connect two computers. All of the tutorials give you incomplete configuration files, and ask you to fill in things which I don't understand, and for me it doesn't make sense to customize these settings, as I just want to connect them and I really don't care what ip address the TFTP server has or whatnot. All of these assume that you are going through a router. I am not. When I try googling for ways to directly connect two linux computers with an ethernet cable, I can't even find instructions, just more references to "you need crossover cables".
So basically, I have two computers directly connected by ethernet cables. Tell me what packages I need to install, what the contents of my configuration files should look like, and what, if any, commands I need to run in order that when I turn on my second computer, and select network boot, it will start up a minimal debian system.
EDIT: Hmmm, it looks like I actually have a linux kernel installed too, but no root filesystem (so no other programs besides busybox).
Ubuntu Networking :: Direct Connection With A Cross Over Cable?
Jan 10, 2010I've got a Laptop with wireless broadband connection which needs to be connected to a desktop machine so that the internet connection could be shared. Both has got Ubuntu 9.1. I don't have a router or a switch. I just need direct connection with a cross over cable.
View 5 Replies View RelatedNetworking :: File Transfer Using Ethernet Cross Over Cable?
Apr 18, 2010I am running Ubuntu Linux 9.10 on my laptop and desktop. I would like to transfer files from one to the other using an Ethernet Cross Over Cable. Is there software already installed in the bundle, that would allow me to setup network drives for each machine when the cable is connected. Also how would I setup the configuration.
View 10 Replies View RelatedNetworking :: How To Connect Two Laptops With Cross Cable In Fedora 9
May 3, 2010I have two laptops running fedora 9 (32-bit and 64-bit on each system) and I want to connect them together for sharing files. For this I have a cross cable i.e.,a simple cable that is usually used to connect a PC with ADSL modem.
View 4 Replies View RelatedUbuntu :: Brothers Printer Connected With A USB Cable
May 15, 2010I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies View RelatedGeneral :: Cross-compiling To Target System?
Jul 22, 2010I have synology nas box DS710+ that has intel atom processor inside. i've installed ubuntu under virtual box, downloaded needed toolchain for x86 processors, and decided to cross-compile openvpn.
I 've started from compiling lzo library, but first question that appeared in my head - how i have to move all compiled binaries to my synology?
1. configure - okay
2. make - okay
3. make install - this is not necessary?
Will --prefix parameter helps me? or do i have to use chroot? cause there is a plenty amount of files that i need to move to my synology.
Ubuntu Multimedia :: Monitor Is Connected Via An HDMI Cable But No Signal
Jul 21, 2011I am running 11.04 on a new Gateway with 8 gigs of ram. It is a solo installation. The monitor is connected via an HDMI cable. Everything was great (installation running smoothly for over a month) until last night. I just installed a netgear router and was setting it up with the system to try to get Stanza on my IPAD to connect to Calibre. Anyway, i suffered a severe freeze up warranting a hard boot. I could see the drive working, ancillary drives lit up, keyboard lit up so I know the system is working. The monitor did not come on, It shows a yellow light indication no signal. It is a 28" Hansspree. I tested the monitor by hooking it to a laptop. The monitor is fine. I cannot see anything on the screen so I can't boot to repair mode or use a CD. There is no signal.
View 1 Replies View RelatedGeneral :: Operating System Command Cross Reference Site?
Oct 18, 2010Does anyone know of a decent Operating System CLI cross reference website where I can compare diffent CLI commands against others? For example I have a MAC OS 10.6X running Darwin and I needed to know what the equivalent command using CentOS of rusers would be? It would be users running that same command at the MAC cli.
View 3 Replies View RelatedOpenSUSE Hardware :: USB Wifi Adapter Works When Connected Directly But It Doesn't With Cable
Jun 4, 2010I am using this usb wifi adapter, it uses zd1211rw and it works fine if I connect it directly to the usb port, but if I add a cable (around 5mts) between the usb port and the usb plug, the device doesn't appear (I used iwconfig to check). The green light on the wifi adapter turns on but it doesn't blink like it does when connecting it directly without the cable. What could be happening?
I use the same cable + usb wifi adapter in windows, and it works fine, I can scan and connect without problems. When I use the cable, lsusb doesn't show the device neither, it does when connecting the adapter directly.
Ubuntu Networking :: Ethernet Suddenly Crash And Says "no Cable Connected"
Apr 1, 2011Yesterday it was everything OK in my PC with Ubutnu 10.4 and WinXP. Suddenly Ethernet stop working at Ubuntu, all what happened in between was a change of user, I trying changin user again, restarting PC, switching the cable (I have two ethernet boards) and nothing happened. It is like a virus attack, I don't know. I am writing now from WinXP in the same computer. Ubuntu says that I have no cable connected, but as you can see I am connected in Windows
View 3 Replies View RelatedGeneral :: View The Amount Of Times Each User Has Connected To System?
Mar 11, 2010I am connected to a network via SHH. Now, i know how i can see which users are logged on as well, but how can i see how many times each user has connected? this refering to users that have logged on at least once
View 7 Replies View RelatedGeneral :: Finding Ipaddress Of The Device Connected With System In Ubuntu?
Mar 25, 2010How to find ipaddress of the device connected to the system.
View 14 Replies View RelatedGeneral :: Power Cable And SATA Cable In Different "boxes"?
Feb 18, 2011I can't get a certain harddrive out of its mounting (screws too tight) , but I want it connected to a different computer. Is it possible to have the harddrive's powercable connected to one computer, and its SATA cable connected to another computer's motherboard? (The powercable is too short to connect it to the other computer.)
View 4 Replies View RelatedUbuntu / Apple :: Cross-system Users And Permissions?
Oct 24, 2010I just finished installing Lucid Lynx on an iMac7,1. I would like to still be able to access my Mac Documents directory from within Ubuntu, so I can have a common directory that both systems can access. Right now, however, I am unable to do that. It looks like it might be a permissions issue- ie I am a different 'user' on both systems, so I don't have access to my Mac files. Is there a way to have the same 'user' account for both systems? If not, could a common 'group' be created in both systems that both of my 'user' accounts have access to?
View 8 Replies View RelatedUbuntu / Apple :: EMac And IMac File Sharing With Ethernet Cable And Other Cable?
Oct 12, 2010how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
Networking :: Can Cat5e Cable Tester Be Used For Cat 6 Cable
Apr 7, 2010Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedHardware :: Hi-fi System Connected With USB?
Feb 21, 2010I am using Debian (testing distribution). I would like to connect my Hi-fi system to laptop with Usb cable. with windows it works fine, no problems at all.
View 7 Replies View RelatedGeneral :: Cross Compile In 64 Bit Machine For 32 Bit Arm?
Nov 18, 2010i have fedora 11(64 bit).i want to do the cross compilation for 32 bit arm processor.i install all required thing but any of the make command(make,make mrproper,defconfig) is not working.
View 8 Replies View RelatedGeneral :: Cross Reference Matching Between Files?
Oct 18, 2009I'm trying to do something very basic in bash. It's a kind of cross-reference matching between 2 files. I have a file1.txt. It's like this:
Code:
item1
item3
item4
...
I Have a file2.txt. It's like this:
Code:
item1 "Properties of item1"
item2 "Properties of item2"
item3 "Properties of item3"
item4 "Properties of item4"
item5 "Properties of item5"
...
My goal is to print out the lines in file2 that contains lines present in file1. I do:
Code:
for i in $(cat file1.txt); do grep $i file2.txt; done but I get no output. Will someone please tell me where am I mistaking?
General :: Cross Compiling GCC For Power PC MPC8260
Mar 2, 2011We want to use GCC for cross compiling C source code for POWERPC MPC8260 target. How do we build cross compiler in windows?
View 3 Replies View RelatedGeneral :: Cross Plat Form Compiling
Feb 21, 2011I developed a test program(my first under linux) some thing like g++ -I$(BOOST_INCLUDE) -L$(BOOST_LIBS) threading.cpp -lpthread -lboostThread -lOtherLib -o threadingTest.out...This thing works in GCC4.5, but to compile it under windows visual studio 2008, do I have to create a new project file and then include all libs?
In short, is there any IDE or utility, where I just compile it either on linux or windows without going and modifying project options again and again ?
General :: Arm-linux-gcc Cross Compiler For Sparc/solaris?
Nov 27, 2010first of all, i will be glad if i can get prebuild toolchain for target=arm1176jzf-s on host= sparc-sun-solaris2.10. ( i hav browsed but can't find prebuild one) so, i tried to establish by myself i hav established binutils first, but while trying to configure& build gcc(gcc4.4.0) , i was interrupted with following error.. error message: this error has come while building boot strap gcc for cross complier tools chain
checking build system type... sparc-sun-solaris2.10
checking host system type... arm-unknown-linux-gnu
checking target system
[code].....
General :: Cross-Compile Fortran And C To Windows Application
Apr 22, 2010I have Slackware 13-64 bit and I would like to cross-compile some Fortran and C programs to windows 32 and 64 bit applications. The Linux versions utilize X11 for the graphical users interface. I have tried MINWG but I could not get it to work, either in pre-built binary or source code form. Is there a binary version that works on Slackware 13? Alternatively, is there another method available?
View 1 Replies View RelatedGeneral :: How To Cross-compile Program For Openwrt Router
Nov 15, 2010I want to compile a program with the source I already have but I have to add an option. When I run the command ./autogen.sh the terminal returns aclocal not found. Is it a package or something i have to install?
View 6 Replies View Related