Networking :: Address Of Remote Network In FreeNX Wizard And Bit Type?
May 21, 2010
Some FreeNX start-up troubles here, need a hand. 1) I am trying to establish a connection from my workplace PC on my workplaces's LAN to my home PC on my private LAN (LAN-to-LAN). Just typing in the public IP of the target LAN in the "Host" field gets me nowhere, as it fails to connect due to a denial at port 22 SSH - even though I've done the forwarding in my home router and punched the required hole in the local firewall of the target machine.
This resembles what I'm looking at: [URL]..2) My home PC is 64-bit Mepis and my workmachine is a 32-bit Ubuntu. Is this a problem?
Is there any one know how to deploy a remote OS installation for a host with public network address? In a LAN with private network, we can use PXE, kickstart... but what we could do with the hosts have only public ip address?
For a Secure Remote Desktop on Ubuntu 9.10 here is how I did it using OpenSSH, FreeNX and a router with DD-WRT v24. Pic of it in use at bottom of post, transferring a file and remote desktop at the same time.
For the purposes of this guide I will use a Desktop as the Server (Host) which is at home. The Client will be a Laptop that I can use to control the Desktop remotely. First you should already be familiar with the Terminal which is where you enter commands (anything in a "Code:" box).
In Ubuntu it is in Applications > Accessories > Terminal In Kubuntu it is usually on the lower left taskbar and is called Konsole I am using Ubuntu so you may have to make some adjustments to this guide if you are not using Ubuntu. Installing OpenSSH (for the rest of this guide I will refer to it as only SSH)
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
I have a Debian VPS running Lenny and I'm trying to setup a way to run remote desktop sessions from it. I went with FreeNX, NX client for windows from nomachine, XDM and xfce4. All seems to have installed well, but I can't start an NX session on my box. I can connect to the server and authenticate, but the client hangs on "Downloading the session information," eventually timing out. The log output is below - I'm not even seeing an error message. Any ideas?
[Code]...
The only thing I noticed during install, which was about 400 packages since this was a barebones VPS, was that I should consider recompiling the kernel with CONFIG_SOFTWARE_SUSPEND=y. I don't know if this has any impact on session information, however, since this is a new session, not one I'm trying to resume.
I am accessing a remote DB using JDBC from inside a java program. is there any terminal command with which I can see the remote machine's ip/mac address?
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
We're using both SuSe and RHEL servers. Our servers are running behind firewall device and remote root login is disabled in SSH.
We're using NAT.
Remote client connections including failed logins are logged into the /var/log/messages but what is logged are gateway ip of our LAN - the LAN IP of Firewall device.
How can I logged the external or public IP of the remote client?
I have installed XAMPP on my system and started it just fine, but for some reason when I type "http://localhost/myDirectory/index.php" into the address bar of a browser, I get a 404 error. I followed the instructions hereand after creating test.php, I was still not able to view it. Can someone please tell me what I am doing wrong?
Just incase anyone is suffering from the same problem as I was after upgrading to 11.3 that there was no such file or directory in /var/lib/nxserver/db/running/sessionID. I found the answer in another forum and thought i would post it here. Basically there is a change in the openssl library used to calculate the md5sum used by nx which stopped it from connecting.
Putting COMMAND_MD5SUM="md5sum" at the end of /etc/nxserver/node.conf fixes the problem.
I've been working on getting NoMachine and FreeNX working together ... and they're both working well, listening on different ports (guess I should write a howto). At some point I decided to write an init script to control FreeNX behaviour (start, stop, status, setup), since the Ubuntu version has one (called freenx-server) and openSUSE doesn't, but I noticed that it was not necessary, as FreeNX got started automatically... but how ? I could not find any init.d script or command which would start the FreeNX server. Indeed it wasn't actually running :
Code: neelix:~ # /usr/bin/nxserver --status NX> 100 NXSERVER - Version 3.2.0-73 OS (GPL, using backend: 3.2.0)
I use getaddrinfo to get the ip address of the server, it works well on other 3 machines, but always get local address 127.0.0.1 on an 64 bit linux machine. Therefore, other remote clients can not connect to the socket server because the server binds local address l27.0.0.1.
I have also tried pass 0.0.0.0 to getaddrinfo, now the server bind on 0.0.0.0(all available interface). But now I can not print the correct network address of the server, as it is always 0.0.0.0 which is provided by getsockname.
I do not know how to get the network address of the server, rather than the local address.
This thread (nxserver now broken?) has inspired me to install FreeNX and the client from nomachine on openSUSE-11.2 (this is the version used on both, server and client machine). The good news is: basically it works. I can connect and get the desktop. However, I have some trouble with the keyboard. Up and Down arrow keys do not work. The up arrow triggers a screen snapshot. The down arrow key does nothing. I tried to connect using qtnx as well. This does not work. Result is:
is there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
I have a server with 2 network cards. eth0 is used for all traffic and everything is working fine on this side. Eth1 is used for traffic to and from 1 ip address.
Lets say the ip address of eth1 is 123.123.123.10 and its gateway is 123.123.123.1. I need to pass all traffic to 123.123.123.20 through eth1. What command would i use?
I would like to set my FireFox up so that when I type something in the address bar that is not a url, it will automatically do a google search. I have done this before, but that was a while ago and I can't remember what settings to change in about:config.Currently, when I type something that is not a url, it performs a search and then automatically opens the first web page that it finds, like a "I'm feeling lucky" search. I just want to see a google list.
i have some php file and i store it inside /var/www/html/and to display it i type Quote:http://ip addrs/file.phpto display the details..and the problem is that i want the php file to be display when i type the ip address only like thisQuote:
I have problem with remote Windows desktop.If I connect from my Ubuntu 10.04 to remote Windows XP SP2 desktop, I can type only digits, but no letters.If I connect from Windows XP, installed as guest in VirtualBox - everything is ok, I can type without problems.
I believe I have the wireless card installed properly and wicd sees the router. When I try to connect I get an error "can not obtain IP address" Output from iwcongif and lspci is.
dillan@dillan-desktop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.
I'm using Ubuntu 9.10 and I recently changed certain settings of my router. After that ubuntu isnt able to obtain IP address from this wifi network. I've tried to connect with win 7 and OS X and both of the OSes are able to connect to the same wifi network. I tried to connect ubuntu to another wifi network at school and it connected successfully.
Notice the 2 in address. Seems to me it doesn't like the network and wants it to be 172.16.0.0, but I am adding to a network already configured this way.
I'm not sure this has anything to do with Samba because I can see and access the ubuntu share files that I share with windows still. I can't see the windows network share files though. If I switch back to my private IP the windows network comes back. How I can get the network to show on my public ip.
I want to block the Mac address in adhoc network to check the behaviour of the aodv protocol.Is there any other utility available for this purpose rather than Mackill..?
Is it possible to create virtual network adapter on the same physical network adapter? or How to give or have multiple MAC Address to the same adpater? I m working on centos 5.3.