CentOS 5 Networking :: When Type Command To Edit My Network IP Address Get Error
Dec 9, 2009I installed Centos server and when I type this command to edit my network IP address I get this error.
View 5 Replies
ADVERTISEMENT
Networking :: Address Of Remote Network In FreeNX Wizard And Bit Type?
May 21, 2010Some FreeNX start-up troubles here, need a hand. 1) I am trying to establish a connection from my workplace PC on my workplaces's LAN to my home PC on my private LAN (LAN-to-LAN). Just typing in the public IP of the target LAN in the "Host" field gets me nowhere, as it fails to connect due to a denial at port 22 SSH - even though I've done the forwarding in my home router and punched the required hole in the local firewall of the target machine.
This resembles what I'm looking at: [URL]..2) My home PC is 64-bit Mepis and my workmachine is a 32-bit Ubuntu. Is this a problem?
CentOS 5 Networking :: Cannot Edit Connection In Network Manager
Jan 12, 2011I'd like to use NetworkManager on a freshly installed CenntOS 5 on laptop Lenovo ThinkPad T61p. I followed: [URL] Everything went OK, until I selected my active LAN connection in "Edit Connections". After clicking on "Edit", it's not possible to change anything - all is grayed-out. I'm guessing it's a permission problem. But I don't know the internal structure of NetworkManager and what files to look at. I was also expecting that after stopping the network service "Syetem->Admin->Network" would be inactive, but it isn't. Shouldn't the old network manager be uninstalled as well?
View 18 Replies View RelatedFedora Networking :: When Type "http://localhost/myDirectory/index.php" Into The Address Bar Of A Browser, Get A 404 Error?
Jul 12, 2011I have installed XAMPP on my system and started it just fine, but for some reason when I type "http://localhost/myDirectory/index.php" into the address bar of a browser, I get a 404 error. I followed the instructions hereand after creating test.php, I was still not able to view it. Can someone please tell me what I am doing wrong?
View 11 Replies View RelatedCentOS 5 Server :: Centos And Xen: Lan Error - Vif0.0: Received Packet With Own Address The Source Address
Jun 18, 2010I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
CentOS 5 Networking :: VMware ESXi - E1000 Network Adapter Is Not Active And Not Pick Up An IP Address?
Feb 28, 2011Installed CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies View RelatedUbuntu Networking :: Unable To Edit IP Address
Sep 19, 2010I am using ubuntulite for an old pc. The speed and performance is excellent!! But there is one problem. I am not able to edit my ip address. The computer is on lan and i have to assign a static ip to my system so that it connects to the net. The gui is not working. So I want to edit the ip through the terminal. How to edit the ip throught the terminal<command line>.
View 9 Replies View RelatedUbuntu :: Network - What Command To Type Into The Terminal To See The Dns Information
Apr 15, 2010I dont have under system->admin networking, but i do have netwroking tools (I have the latest version of ubuntu) and I am wondering - what command can i type in to the terminal to see the dns information? also can I install "network" for ubuntu?
View 1 Replies View RelatedUbuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting
Dec 16, 2010Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
Networking :: Error Str2addr:Address 35 Outside Range Of Address Field Length 1?
May 12, 2011I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
CentOS 5 Networking :: Which Command Can Check If Network Card Is Connected With Media
Nov 26, 2009Suppose that it is not convenient to go behind a machine to have a look.So I want to use a command to show whether the cable is plugged into network card. (Media connected or not)Can ifconfig do this? Or another one?
View 2 Replies View RelatedOpenSUSE Network :: Error As "This Address Uses A Network Port Which Is Normally Used For Purposes Other Than Web Browsing
Jul 27, 2011I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
Ubuntu Installation :: Get An Error Message That Tells To Type A Command Into The Terminal?
Jun 8, 2011I was running an update on my computer (running Ubuntu 10.04 Lucid) and something must have been transferred incorrectly as every time I open synaptic, I get an error message that tells me to type a command into the terminal:
Code:
sudo dpkg --configure -a
After doing that, it displays this:
[code]....
Software :: SCP Error: Unrecognized Configuration Parameter Permitlocalcommand When Run ANY Type Of Scp Command
Jan 31, 2011This started happening about 2-3 weeks ago when i noticed our backups weren't running anymore. whenever i try to run ANY type of scp command I get the following error: warning: Unrecognized configuration parameter permitlocalcommand ssh: FATAL: Illegal -o parameter "PermitLocalCommand no" lost connection
I checked the /etc/ssh/ssh_config file and there was a command PermitLocalCommand commented out, but for testing I even totally removed that line and then in scp forced the use of that file via scp -F /etc/ssh/ssh_config ......
and I still get the same error. This command is nowhere is any of my ssh config files so im at a loss here on how im supposed to fix this!! I even checked my home directory for maybe a ssh config file that might be overridding the system config but nothing.
CentOS 5 Networking :: How To Create Wireless Network From Command Line With Hidden ESSID
Feb 27, 2011I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies View RelatedCentOS 5 Networking :: Error - No Network Devices Available - 5.3
May 6, 2009Right now I have this error
On my top right hand corner. No network devices available.
My distro is Centos 5.3
General :: CentOS Command-line Program To Randomly Change MAC Address?
Nov 7, 2009OS: CentOS 5.3 Enterprise Server
Red Hat Nash Version 5.1.19.6
I need to find a command-line program to randomly change my MAC address. I know on Ubuntu there is a program called 'macchanger'. And on Windows another one called 'macshift'. I just can't find one for CentOS 5.3 Enterprise Edition.
Ubuntu Installation :: Error "mount Error: Could Not Resolve Address For Servername: No Address Associated With Hostname
Jul 14, 2011This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies View RelatedCentOS 5 Networking :: Kernel Rpm Install After Error "Bringing Up Interface Eth0: Device Eth0 Has Different MAC Address Than Expected, Ignoring"
Dec 26, 2010i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View RelatedCentOS 5 Networking :: CentOS 5 BCM4315 WPA-PSK DHCP Won't Obtain IP Address
Nov 7, 2010I am having a problem getting a wireless network connection on my DELL laptop running CentOS 5. I have no problem getting a wireless connection when the laptop is booted in Windows XP. I also don't have a problem when booted under CentOS 5 and there is no authentication setup on the wireless router. I only have a problem when I setup authentication. The router wireless log shows the PC connectinng, authenticating, and succeeding authentication.I am using the Broadcom Hybrid-wl wireless driver.
View 19 Replies View RelatedCentOS 5 Networking :: Centos OS 64 - Development VM Image With Static Ip Address?
May 23, 2011I am a developer, not a network admin - sorry if this ia dumb question. I need to test an application on CentOS 55 64 bit. The instalation went fine and initially I let DHCP work its magic. The router IP address ia 192.168.0.1 and all other VM's I have are granted dynamic ip address on this range (i.e. 192.168.0.x). However, the CentOS vm got an IP address that looks like it belongs on a different subnet :192.168.1.1
The VM (vmware desktop) network setting for this VM uses "Bridged: Connected directly to the physical network". I can ping the host (Windows 7 64 bit) and the host can ping it (it been the VM) - but no other computer on the network can see it. To make things easier, I changed the network configuration to use a static IP address. Here are my configuration files:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0C:29:83:4B:A4
ONBOOT=yes
TYPE=Ethernet
[Code]...
Ubuntu :: Error: Can't Perform Indexing Operations For <unknown Type> Type
Feb 26, 2010I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
Programming :: Error - Array Type Has Incomplete Element Type
Jan 26, 2010I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
Networking :: Shows Error Rtnetlink Answers: File Exists Error Adding Address [ip]?
Jul 3, 2009I'm only partially new to Linux. I'm running Fedora 11. I've just set up two machines, I thought to be identical. Evidently I missed something. I had some problems getting the network started on the second machine, and I must have forgotten a name change somewhere. Anyway, after doing lot's of comparisons between the boxes, editing and renaming and re-linking the ifcfg-GigaStorey file, they are both functioning. The problem is that whenever I start or restart the network on box 2, it reports the following error:
Bringing up interface GigaStorey: RTNETLINK answers: File exists
Error adding address 192.168.1.6 for eth0.
[ OK ]
The file ifcfg-GigaStorey is linked in the following directories
/etc/sysconfig/network-scripts
/etc/sysconfig/networking/devices
code....
Like I said, it's not super critical, just annoying. The networking comes up ok, but the error is puzzling. I figure if I learn what this problem is I'll be one step closer to my Linux beanee.
CentOS 5 :: Squid 3.0 Error:(99) Cannot Assign Requested Address?
Aug 13, 2009I have got squid 3.0 stable 13 installed on a new centos5 box .I have used it on other centos5 ones and it has worked really well.It didnt give any error messages during installation on this one until i used the proxies in the browser.I have used it on other centos5 ones and it has worked really well.But with this box I am getting this error in browser-The following error was encountered while trying to retrieve the URL:Yahoo!Socket FailureThe system returned: (99) Cannot assign requested addressSquid is unable to create a TCP socket, presumably due to excessive load. Please retry your request.I have tried many options for http_port but to no avail.I have never seen this error before with and am totally clueless
Excerpts from cache.log
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2009/08/13 05:57:17| Squid Cache (Version 3.0.STABLE10): Exiting normally.
[code]....
Ubuntu Networking :: Necessary To Edit Network Proxy In 10.04 LTS?
Jul 6, 2011I need to set up network proxy for Ubuntu 10.04 LTS (system->prefernces->network proxy)? In fact I can connect to internet using a modem without worrying about it but will it be better if I do? In firefox, should I edit proxy setting? the options are: no proxy, auto detect proxy, use system proxy, manual proxy, and there are severl proxies like HTTP proxy etc. Does proxy setting has anything to do with security?
View 1 Replies View RelatedFedora Installation :: Can't Config The Network Config ( IP Address ), Due To The Error Of Network Manager?
Jan 17, 2010When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedUbuntu Servers :: DNS / IPV6 Address - Error Network Unreachable
May 25, 2011I use DNS on my server as a chasing DNS so its not fully configured. I seem to be having trouble with IPV6 addresses. I'm guessing this is linked to the 6to4 tunnel I have set up to my windows box, but I'm not really sure.
Code:
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'D.ROOT-SERVERS.NET/AAAA/IN': 2001:dc3::35#53
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'B.ROOT-SERVERS.NET/AAAA/IN': 2001:500:1::803f:235#53
May 21 18:00:17 hyrule named[1148]: error (network unreachable) resolving 'zg.akamaitech.net/AAAA/IN': 2001:503:a83e::2:30#53 .....
CentOS 5 Server :: Way To Allow Certain Email Address / Local Network To Send Out Without Authentication?
Mar 4, 2010i have a small issue, to make our network more secure, i now require outgoing email to require authentication. Now the problem..i have a automated mailer that does not have the option to authenticate. is there a way to allow a certain email address or the local network to send out without authentication? If i cannot do this for a single email user to allow them through with authentication, how would i remove the authentication paramaters in the postfix smtp..
View 2 Replies View RelatedUbuntu Networking :: Network Config - Edit Connections
Jun 14, 2011Using xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies View Related