Tried to install Fedora 12 by booting from CD#1 on a Mac G4. First, got a message that video RAM allows only for text installation. OK, but then Anaconda (12.46) just installed some bare-bone software set without any option of package choice! After a longer search I found there`s. no choice for text install! how to configure the net and install things using text mode only (no GNOME present).
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
I recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
I'm running F11 and I'd like to run anaconda to install another instance of F11 to a second (blank) hard drive in my system. I'd like to do it without rebooting. The second drive is removable.What's the magic?
View 1 Replies View RelatedAfter installing Fedora 14 and being satisfied with the behaviour and the packages installed for it, i want to replicate the same installation in a few more PCs, so i installed Revisor to make with it an iso file that reflects my actual installation.
The problem is that if i run the software from Applications->System tools->Revisor, nothing happens after giving the user password.
Then i run it from a consele and this error is produced after giving my password: "Cannot find anaconda-runtime in /usr/lib/anaconda-runtime"
But anaconda is the environment used for installation, so it is installed from the very begining. Why this happens?
I am using the (K, X)Ubuntu 10.04 alternate installation CD in expertmode. Although package selection is offered, I am not able to choose which packages get installed during the installation process. Best regards, owiknowi
View 3 Replies View RelatedI have F12 and been using the livecd-creator command since F9 to create liveUSB devices which are used to install Fedora on all the systems (nearly 100) I support at different sites ensuring they have the same build/configuration. About a week ago, I created a new image and when I attempt to install to hard drive, there is an ABRT message displayed;
"A crash in the anaconda-12.46-2.fc12 package has been detected"
Also see attached file.Now I am not able to install to hard drive.
It appears this is a known bug which has been reported at url.and that there is not fix planned. Can anyone confirm this?
If this is the case, does it mean that the �Install to Hard Drive� feature will no longer be available?
I'm trying to install F12, over my existing F10. I ran preupgrade, and it installed anaconda into the boot menu, without apparent problems. On reboot, however, it fails with the following message:Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.Cannot retrieve respository metadata (repomd.xml) for repository: anaconda-InstallationRepo-200911081854.i386. Please verify its path and try again.I must admit to being a bit unclear as to what's going on here. Is it looking in the cached pre-install tree for said repomd.xml, but said tree is somehow corrupt; or is it trying to find it via the network, and failing (for whatever reason).
View 1 Replies View RelatedIm actually using Fedora 11 in Dual Boot with VistaI used to have Fedora 11 and then I installed Ubuntu and it (and myself) screwed my partitioning, and Just linux used to run.Ubuntu wrote the boot sector over the NTFS like it was ext3.I tryed everything the get beck my windows partition booting.Reinstalled a Fedora 11 clean, to see if it could help me (thinking in reintstall it later).Using testdisk application I managed to have back access to my disks files, but no boot working. I tryed a lot of things in testdisk and Windows Vista Recorvery, with no work.
So I ran the Acer Recorvery Disks, that reseted my NTFS with Vista to a brand new installation from Acer.Now I want a Full Fresh Fedora Install from DVD but anaconda tells me (in pt-br): "Error in processing the disk sda. Maybe it would be necessary to reinitialize. YOU WILL LOOSE AL THE DATA IN THIS DISK."I really cannot reinitalize it becouse my NB have some recorvery partitions that I use to reinstall the windows to its factory settings, and Im scared of reinitalizing it becouse maybe it could just screw everything and make it not work as well, now with no OS running.The GNOME Partitioning Software just detect a full unpartitioned hard drive. I think the problem is that I changed the LVM to something wierd that anaconda dosent recognizes.Some hardware information (my fedora is in PT-BR):Quote:
dmraid -r
no raid disks
blkid
[code]....
Anaconda instakler.The details of the architecture of the anaconda installer.
View 3 Replies View RelatedI decided to upgrade an old box I use as a server at home. I had been running F8, but after it's end of life and numerous patches since then it was getting a little shaky. I downloaded the KDE Live CD (picked that arbitrarily really since I don't run X on this box - just didn't want to do the whole install over the net) and off I go.
So I booted the CD and added "liveinst" as a boot loader option to kick off the install without starting X and KDE. Just as Anaconda was starting, I got the message "there is not enough memory for a graphical install" and the text based installer starts up. Kinda strange, I thought, since this box had the "recommended" amount of ram mentioned in the F12 release notes. Oh well, so their docs are wrong - wouldn't be the first time and anyway I'm used to doing text based installs from way back.
But this one wasn't like any I'd seen before. After the welcome screen there were only 4 questions - keyboard type, language, timezone, and disk options. Also, at various stages odd characters similar to the Russian alphabet started popping up in various areas on the screen. When it got to the disk options there were 3 - use entire drive, replace existing linux install, and use free space. I picked the 2nd one and moved on. The next screen said my choice was about to be written to disk blah blah blah - but gave me no option to specifiy which partitions to use or how to use them. I should mention here that this box had 3 partitions on it - 1 for swap, 1 for root, and 1 for var...........
I have run preupgrade; the image won't fit on the existing boot sector; so it wants an internet connection, which it has. Then it bombs after it detects the existing installation (Fedora 11), and also detects where the boot record is, which I tell it update. The bug report file generated by anaconda is attached. I would have done this in Bugzilla, but for some reason it will not recognize my login.Critical information:quad x86_64 machine, 8 GB memory, dual boot, two hard drives. hard drive 1 has Linux, hard drive 2 has Vista, the mbr is on hard drive 2.It is possible the unusual configuration is the cause of the problem. I do hope I can get around this, because there is so much stuff installed that it would be a real pain to start from scratch.
View 5 Replies View RelatedI tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies View RelatedI known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
i did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies View RelatedI'd like to install Fedora12/13 on a external USB 2.0 HDD. Ive managed to do so with the live image several times, but the DVD installer does not see that particular USB HDD so I cannot install Fedora on it. Its the same with F12 and F13.Ive already tried to start the installation in expert mode. The expert option is ignored or something (linux expert/expert does nothing). Im not sure where exactly to write the options. I chose the rescue line and changed rescue to expert (nothing happend).
Then Ive tried Ctrl+Alt+F2 > "modprobe usb-storage" with no output (that should be right, right?). Again nothing.How to start anaconda (the DVD installer) in expert mode?How to load proper modules (to get the USB Drive to be recognised)?How to install Fedora12/13 from DVD onto USB2.0 HDD?
I'm trying to install Fedora 10 on my samsung HDTV with my PC hooked up via DVI-HDMI. All the text screens look fine, but when it loads the graphic installer, the video gets corrupted, but i have a mouse, but a few seconds later it freezes and hangs, and I can't do anything. Nothing loads. This happens with the livecd's as well.
View 3 Replies View RelatedI've some problems upgrading to version 10 from version 8. My workstation is certified by RedHat. It's a HP xw6600 with double processor Intel Xeon 5405 2.00 12M/133 QC and graphic card for dual screen Nvidia Quadro NVS 290 PCle. In my OS library I found version 8 to install. It has been installed successfully! However; I've read about advantages for workstation on version 10. Thus, I've downloaded Fedora ISO ver.10 and I've tried to install it in my WS. Here I found a problem: Just in the moment it try to start anaconda, the screen remain black. After three failed intents, I have tried to upgrade my version through the 'yum':
# yum -y update
# yum install preupgrade
# preupgrade
It ran perfectly till anaconda try to run again. Then, I've tried to upgrade to ver.9 from ver.8 and I getting the same problem. I've downloaded the Live CD and that is blocked as well. Of course, I've installed all drivers of my WS before upgrade but I get the same problem. So... How I can fix this problem?... I really need move to version 10. Ah!... I've tried to install beta version 11 but after one hour I get a error messages due at a bug
I've installed Fedora from the Live CD (Fedora 13). The Installation Guide says that if you install from the DVD (or, as I understand it, the five or so CDs) you get the choice of installing lots more software. I've now got a copy of the CD. But how do I use it to install the extra software it contains? The Installation Guide says use the Add/Remove Software tool. But that tries to download stuff from the Internet. Nothing about installing from the DVD.
View 4 Replies View RelatedWhenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedI'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
Installing f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
View 13 Replies View RelatedI have wasted lot of time in installing rpm packages which are needed for oracle 11g on Fedora 10. Packages dependencies are going in circle. Is there any better to handle this package install and its dependencies? I was using rpm -ivh command. Following are required packages. Tried to down load packages which are not present in /var/log/rpmpkgs.
In some cases I got higher versions of the following packages.
binutils-2.17.50.0.6-2.el5
compat-libstdc++-33-3.2.3-61
elfutils-libelf-0.125-3.el5
elfutils-libelf-devel-0.125
glibc-2.5-12
glibc-common-2.5-12
glibc-devel-2.5-12
glibc-headers-2.5-12
gcc-4.1.1-52
gcc-c++-4.1.1-52
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.1-52
libstdc++-4.1.1
libstdc++-devel-4.1.1-52.e15
make-3.81-1.1
sysstat-7.0.0
I'm new to Fedora (not linux) and I was wondering how I would go about doing a minimal install of fedora 12. I downloaded the live disc but it doesn't give me installation options (I'm new to minimal installs so I don't know that much). I also searched all over looking for a fedora minimal install iso, something similar to the ubuntu minimal install iso that is only 12mb.
View 14 Replies View RelatedBasically what I want to do is switch from Ubuntu to Fedora as my base system. I normally do a minimal / CLI install of Ubuntu and then run my script to install packages and software I need.
Thing is, my script is made for Ubuntu and thus, I now have to make it compatible with Fedora. I already switched all the apt-get install commands with yum install but still I'm unsure whether the script is compatible.
Another thing is that I don't know if all these packages are in the Fedora repo's. So:
Would you check the script for any errors and/or packages that aren't in the Fedora repo's? (Lines that're commented out can be ignored)
I'm particularly insure about the yum install -y part and the yum dist-upgrade -y --force-yes part.
Code:
HOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies View RelatedOn some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies View RelatedI need one help in Fedora 10. I've tried searching all over google and I've not found anything relevant to my problem. I installed Fedora 10 choosing only the basic set of packges. i.e. I uncheck 'Office and Prod' and 'Software Dev' during installation. I wanted to install the base packages and then wanted to install what I need later on. Now that everything is stable and working fine, I want to install the software dev and office package but I dont know how to do this. I am not finding any option to install packages from the DVD or such. Is there any config script that will install all the packages from those two sets. I dont want to install package one by one.
View 2 Replies View RelatedCurrently i am using mapserver 5.0.3 , AGG 2.5-6 on fedora 9. I need some help with mapserver and AGG support. I am trying to use AGG/PNG outformat in the mapfile as well as i added precisely. When i call the link through browser i recieved the following error:
loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver AGG/PNG, but this driver isn't configured. It is clearly evident that from the error, the driver is not configured. since all the mapserver version 5 suppotrs AGG rendering backend, so i checked whether mapserver supports AGG or not.
[kapil@localhost cgi-bin]$ mapserv -v
MapServer version 5.0.3 OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG OUTPUT=WBMP OUTPUT=SVG SUPPORTS=PROJ SUPPORTS=FREETYPE SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT SUPPORTS=WFS_SERVER SUPPORTS=WFS_CLIENT SUPPORTS=WCS_SERVER SUPPORTS=SOS_SERVER SUPPORTS=THREADS SUPPORTS=GEOS INPUT=TIFF INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=MYGIS INPUT=SHAPEFILE
[kapil@localhost cgi-bin]$
I found that my mapserver doesn't support AGG means SUPPORTS = AGG is missing in the above output. But i have already installed AGG in my system. In order to clear this issue i gone through many threads in forums, but i was not satisfied with the answers. Atlast i came to know that, i have to recompile the mapserver with AGG. The following link gives you some idea about compiling mapserver with AGG in linux [URL] But the problem now i am facing is i have installed both the mapserver and AGG through YUM INSTALL command so i dont know how to recompile mapserver with AGG support. I think, there will be no configuration file normally when installing through Yum insatll command.
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View Related