I'm trying to install Fedora 10 on my samsung HDTV with my PC hooked up via DVI-HDMI. All the text screens look fine, but when it loads the graphic installer, the video gets corrupted, but i have a mouse, but a few seconds later it freezes and hangs, and I can't do anything. Nothing loads. This happens with the livecd's as well.
View 3 RepliesI'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
After installing Fedora 14 and being satisfied with the behaviour and the packages installed for it, i want to replicate the same installation in a few more PCs, so i installed Revisor to make with it an iso file that reflects my actual installation.
The problem is that if i run the software from Applications->System tools->Revisor, nothing happens after giving the user password.
Then i run it from a consele and this error is produced after giving my password: "Cannot find anaconda-runtime in /usr/lib/anaconda-runtime"
But anaconda is the environment used for installation, so it is installed from the very begining. Why this happens?
I let the update manager run overnight on my netbook because it was taking a while. When I woke up, my netbook was off. It may have shut off during the updates. Now, when I turn it on, it gets to the login screen but the keyboard and mouse don't work. Is there anything I can do without a Live CD? Unfortunately I don't have a flash drive or anything with me.
View 1 Replies View Relatedso, last night i checked my e-mail, jumped on facebook for a minute and went to bed. i got up this morning and my computer seemed frozen; no mouse/keyboard, no network visibility.....nothing. the screen was just frozen. tried too ssh into it to reboot, but the network wasn't up on it. i had to hard reboot. NOW, it just reboots forever....and ever....and ever. i have a WinXP partition on there along with my F12 and that wont boot either. selecting a previous kernel does nothing either. it wont even boot off the F12 install DVD. just keeps rebooting. I've never had this happen to me. so, it seems like a hardware thing to me, but i dont know if its my mobo or the drive. i suspect a mobo issue as the drive still spins up and gets me to the grub menu.
View 2 Replies View RelatedI keep starting up Fedora and I'm not able to get far (although it's not always at the same time) before my screen will go black, except it shows the mouse/cursor - but it's frozen, and thhen the caps-lock light starts blinking and I can't do anything or get it to recover. Sometimes it happens after 30 seconds, sometimes 40+ seconds and sometimes within 15 or so seconds.
How do I stop this and diagnose this?
I've tried, in the boot-startup to choose an older kernel version, butt the same thing occurs!
I have:
Fedora 11
Kernel: 2.6.29.6-217.2.16.fc11 i586
Asus EEE PC 1002HA
One other thing, it does always seem to happen after I've turned on wireless. And I've been using F11 for months now with no issue.
I have F12 and been using the livecd-creator command since F9 to create liveUSB devices which are used to install Fedora on all the systems (nearly 100) I support at different sites ensuring they have the same build/configuration. About a week ago, I created a new image and when I attempt to install to hard drive, there is an ABRT message displayed;
"A crash in the anaconda-12.46-2.fc12 package has been detected"
Also see attached file.Now I am not able to install to hard drive.
It appears this is a known bug which has been reported at url.and that there is not fix planned. Can anyone confirm this?
If this is the case, does it mean that the �Install to Hard Drive� feature will no longer be available?
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
I'm trying to install F12, over my existing F10. I ran preupgrade, and it installed anaconda into the boot menu, without apparent problems. On reboot, however, it fails with the following message:Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.Cannot retrieve respository metadata (repomd.xml) for repository: anaconda-InstallationRepo-200911081854.i386. Please verify its path and try again.I must admit to being a bit unclear as to what's going on here. Is it looking in the cached pre-install tree for said repomd.xml, but said tree is somehow corrupt; or is it trying to find it via the network, and failing (for whatever reason).
View 1 Replies View RelatedIm actually using Fedora 11 in Dual Boot with VistaI used to have Fedora 11 and then I installed Ubuntu and it (and myself) screwed my partitioning, and Just linux used to run.Ubuntu wrote the boot sector over the NTFS like it was ext3.I tryed everything the get beck my windows partition booting.Reinstalled a Fedora 11 clean, to see if it could help me (thinking in reintstall it later).Using testdisk application I managed to have back access to my disks files, but no boot working. I tryed a lot of things in testdisk and Windows Vista Recorvery, with no work.
So I ran the Acer Recorvery Disks, that reseted my NTFS with Vista to a brand new installation from Acer.Now I want a Full Fresh Fedora Install from DVD but anaconda tells me (in pt-br): "Error in processing the disk sda. Maybe it would be necessary to reinitialize. YOU WILL LOOSE AL THE DATA IN THIS DISK."I really cannot reinitalize it becouse my NB have some recorvery partitions that I use to reinstall the windows to its factory settings, and Im scared of reinitalizing it becouse maybe it could just screw everything and make it not work as well, now with no OS running.The GNOME Partitioning Software just detect a full unpartitioned hard drive. I think the problem is that I changed the LVM to something wierd that anaconda dosent recognizes.Some hardware information (my fedora is in PT-BR):Quote:
dmraid -r
no raid disks
blkid
[code]....
Anaconda instakler.The details of the architecture of the anaconda installer.
View 3 Replies View RelatedI decided to upgrade an old box I use as a server at home. I had been running F8, but after it's end of life and numerous patches since then it was getting a little shaky. I downloaded the KDE Live CD (picked that arbitrarily really since I don't run X on this box - just didn't want to do the whole install over the net) and off I go.
So I booted the CD and added "liveinst" as a boot loader option to kick off the install without starting X and KDE. Just as Anaconda was starting, I got the message "there is not enough memory for a graphical install" and the text based installer starts up. Kinda strange, I thought, since this box had the "recommended" amount of ram mentioned in the F12 release notes. Oh well, so their docs are wrong - wouldn't be the first time and anyway I'm used to doing text based installs from way back.
But this one wasn't like any I'd seen before. After the welcome screen there were only 4 questions - keyboard type, language, timezone, and disk options. Also, at various stages odd characters similar to the Russian alphabet started popping up in various areas on the screen. When it got to the disk options there were 3 - use entire drive, replace existing linux install, and use free space. I picked the 2nd one and moved on. The next screen said my choice was about to be written to disk blah blah blah - but gave me no option to specifiy which partitions to use or how to use them. I should mention here that this box had 3 partitions on it - 1 for swap, 1 for root, and 1 for var...........
I have run preupgrade; the image won't fit on the existing boot sector; so it wants an internet connection, which it has. Then it bombs after it detects the existing installation (Fedora 11), and also detects where the boot record is, which I tell it update. The bug report file generated by anaconda is attached. I would have done this in Bugzilla, but for some reason it will not recognize my login.Critical information:quad x86_64 machine, 8 GB memory, dual boot, two hard drives. hard drive 1 has Linux, hard drive 2 has Vista, the mbr is on hard drive 2.It is possible the unusual configuration is the cause of the problem. I do hope I can get around this, because there is so much stuff installed that it would be a real pain to start from scratch.
View 5 Replies View RelatedI recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
i'm having an issue with the touchpad on my hp pavilion laptop. as of this afternoon, the cursor has started to freeze immediately as ubuntu is booted up (but it is normal during the login screen process). i think this has happened because i accidently pushed a button i didn't know about right above the touchpad/mouse which froze the mouse, but i was able to toggle this a few times by pushing the button again.
the mouse froze completely after toggling this a few times, and it comes back after a restart but only during the login screen - it freezes immediatly as ubuntu is loaded and the cursor changes from black to white. the keyboard is still functional. are there keyboard shortcuts i can use to get to the start menu or the terminal to try and fix this issue? and what do you think i should do about it?
I've had this issue for years and on several different machines, all running various versions of Debian. I'm using a PS2 Logitech Mouseman 3-button mouse. Sometimes if I forget to move the mouse during boot, the pointer will be frozen. Keyboard works fine.When I remember to keep the mouse moving until the login screen appears, the pointer will work just fine.Right now I'm running 3 computers sharing same mouse/keyboard/monitor all different Linux OS, all have same issue. On a separate 4th computer running Mepis I changed that mouse to a different brand and problem went away. The problem seems peculiar to the Logitech mouse. (my wife wanted a computer that works, no hassles)The problem is getting more chronic. Is there a way to just put the mouse control into a configuration file and run it at startup instead of having the system do an autodetect?
View 2 Replies View RelatedI tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies View RelatedI'm running F11 and I'd like to run anaconda to install another instance of F11 to a second (blank) hard drive in my system. I'd like to do it without rebooting. The second drive is removable.What's the magic?
View 1 Replies View RelatedI known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
Just upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.
View 3 Replies View Relatedi did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies View RelatedTried to install Fedora 12 by booting from CD#1 on a Mac G4. First, got a message that video RAM allows only for text installation. OK, but then Anaconda (12.46) just installed some bare-bone software set without any option of package choice! After a longer search I found there`s. no choice for text install! how to configure the net and install things using text mode only (no GNOME present).
I'd like to install Fedora12/13 on a external USB 2.0 HDD. Ive managed to do so with the live image several times, but the DVD installer does not see that particular USB HDD so I cannot install Fedora on it. Its the same with F12 and F13.Ive already tried to start the installation in expert mode. The expert option is ignored or something (linux expert/expert does nothing). Im not sure where exactly to write the options. I chose the rescue line and changed rescue to expert (nothing happend).
Then Ive tried Ctrl+Alt+F2 > "modprobe usb-storage" with no output (that should be right, right?). Again nothing.How to start anaconda (the DVD installer) in expert mode?How to load proper modules (to get the USB Drive to be recognised)?How to install Fedora12/13 from DVD onto USB2.0 HDD?
I've some problems upgrading to version 10 from version 8. My workstation is certified by RedHat. It's a HP xw6600 with double processor Intel Xeon 5405 2.00 12M/133 QC and graphic card for dual screen Nvidia Quadro NVS 290 PCle. In my OS library I found version 8 to install. It has been installed successfully! However; I've read about advantages for workstation on version 10. Thus, I've downloaded Fedora ISO ver.10 and I've tried to install it in my WS. Here I found a problem: Just in the moment it try to start anaconda, the screen remain black. After three failed intents, I have tried to upgrade my version through the 'yum':
# yum -y update
# yum install preupgrade
# preupgrade
It ran perfectly till anaconda try to run again. Then, I've tried to upgrade to ver.9 from ver.8 and I getting the same problem. I've downloaded the Live CD and that is blocked as well. Of course, I've installed all drivers of my WS before upgrade but I get the same problem. So... How I can fix this problem?... I really need move to version 10. Ah!... I've tried to install beta version 11 but after one hour I get a error messages due at a bug
I run a HTPC which I recently upgraded 11.2 -> 11.3.Most things work fine but I've got an oddity. After the TV is shut down and restored the mouse cursor is "frozen":The old mouse image stays where it isHowever, the mouse IS active, in that you can (blindly) move the mouse, see it mouse-over widgets, and activate them - there's just no visible cursor where the hotspot is.Hardware is ATI chipset (can't remember which, offhand, but it's only a year or two old), running AMD driver, with a HDMI link to the TV.
View 2 Replies View RelatedI'm testing a new PC and for business reasons it has to be able to run with Ubuntu 8.04 .The first problem I had was with the Intel GMA 4500 graphics driver. I have managed to resolve that and can now get resolutions > 800x600. However since then the mouse pointer is intermittently corrupt. I've attached an image showing the corrupt pointer which is about the size of a thumbnail.The driver I have installed is xserver-xorg-video-intel_2.4.0~melchiorre-5_i386.deb .I've also attached a copy of my xorg.conf file.While I've been writing this post I've noticed that if I take a screenshot or if I connect to the PC using VNC the entire screen is corrupt.
View 1 Replies View RelatedThis is the error message I get after following all the proper steps to setting up a live USB and trying to install it.
[URL]
Obviously pressing enter doesnt do anything. My hardware is a Dell Inspiron 1420 Core 2 Duo with windows 7, I have an Nvidia video card and I used the LiveUSB Creator from [URL]
My hard disk is blank now due to some faults I made in installation.I made a USB stick from which can start Fedora 10 livecd image successfully. My USB device is only 2GB, so livecd image is my only choice. Everything is fine in live cd system. but when I try to install system to hard disk, my PC got frozen - no responses from anything. This situation only happens when I set up the partition and began to write image to the hard disk. It happens at about 5 percent of the progress bar every time. It seems I can't install F10 this way.
So I tried another way : using this LiveCD USB Stick, install it in text mode. However, strange thing came up too: when I finished install the system , it tips "reboot". so I pressed "reboot", however it start KDE and then got frozen again. When I restart PC by "reset" button, it tips me can't find OS - insert system disk and press Enter. It's a BIOS message , so I think at least GRUB is not working. But why and how this happens? I set up them correctly without error tips. But now it can't be started. I set GRUB to be installed in MBR during the installation. My hardware is like this : AMD 5000+ black edition , 4GB RAM , ati 3200 video card , 320GB hard disk (sata port).
Tried to install Fedora 11 from CD Live, CD, DVD, USB. In all cases installation (actaully, the boot) hangs up with the screen suddenly frozen and getting into weird greenish-bluish-whitish colors (see screenshots attached). The laptop is Cameron Maxmedia with AMD PCS.
View 2 Replies View Related