Install :: Display Fails In Opensuse 11.4 / What To Do?
Mar 25, 2011
I have been with opensuse from 10, and I currently run 11.3 on my desktops. My attempt to install 11.4 failed. It produced a display with many tiny rectangles instead of a gui. I guess there is a discrepancy between the times produced by the x and the y display drivers and the times expected by the display hardware. I can't blame it on the display hardware, though, because I switched to another monitor and got the same error. I did the usual tests from the install screen, and there are no errors. If I run the program in fail-safe mode, the display is text only. In this case there is no x-server. I have not observed that in 11.3 fail-safe.
View 9 Replies
ADVERTISEMENT
Mar 11, 2011
Same problem with 11.4 x64 DVD version (gnome default). System ends with text before showing logon screen allso in failsafe
[code]...
View 6 Replies
View Related
May 26, 2010
I have recently disabled nautilus from showing up on my desktop. Now I can't seem to start nautilus. Starting it from gnome-terminal doesn't display anything, and it never shows, and it never terminates. The way I disabled nautilus from showing up on my desktop was by following Xmonad/Using xmonad in Gnome - HaskellWiki
View 5 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Aug 9, 2011
I am running into a problem with my xen installation. So far I have:
- installed 11.4 64bit
- installed hypervisor and tools (I created br0)
- boot into xen kernel
- run a zypper update
My current configuration is:
Linux linux-c7sq 2.6.37.6-0.7-xen #1 SMP 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
using patterns-openSUSE-xen_server-11.4-6.9.1.x86_64:
- bridge-utils-1.4-63.1.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
- xen-doc-html-4.0.2_02-4.9.2.x86_64
code....
Does anyone have the same problem? There was nothing on google on this, and the xs_handle cannot be debugged as xs.so isn't visible to me.
View 2 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
Jun 13, 2011
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies
View Related
Nov 18, 2009
On a fresh install (tried two new installs now) I'm getting an error when I try to go out to the update repositories after the install. I'm getting a "failed to download /suse/setup/descr/packages.DU.gz from [URL] It seems to get about 48% and just hangs there. This happens both if I try downloading updates during the install or if I try doing an on-line update after the system is up.
View 2 Replies
View Related
Mar 4, 2010
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies
View Related
Mar 23, 2011
Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies
View Related
Mar 26, 2010
I am still in the process of rebuilding my laptop with openSUSE 11.2 x86-64. I downloaded a large application tar.gz extracted 500M of app to disk copied it to cd with K3B and verified the cd. I then deleted the tar.gz. I browsed the CD with dolphin (/media/expc/.... I then start a terminal su to root cd /media/expc and get an error stating the the file or directory does not exist or is inaccessible. If I go back to my own account I still can't cd to /media/expc. From /media ls -l lists expc as being readable by everyone and in any case I can browse it with dolphin.
The CD is fine. I mounted it by hand on /mnt as root and then installed the application without problem. Going back to the original way of loading and mounting the cd reproduces the problem
View 1 Replies
View Related
Mar 22, 2011
I did a clean install, replacing 11.3 with 11.4 (BTW, why couldn't 11.4 recognize a ext4 partition??). When I boot, the cursor is a garbage block in the center of the screen. When I move, the cursor disappears. The display never progresses past the splash and no progress bar appears. When I boot in safemode, it works, but the display is slow and jerky. This is such a show stopper for me that I had to revert to 11.3 which does not like my touchpad.
View 3 Replies
View Related
May 9, 2011
I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.
What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.
I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!
If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.
Some details of my hardware:
- graphics card: nVidia GeForce 6150SE
- driver: nouveau
- display: Acer HD 24inch screen with a resolution of 1900x1080
Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.
View 4 Replies
View Related
May 21, 2010
Third attempt to install 11.2 live on my netbook with three different USB sticks.
Every time it fails message reads...
Error occured while installing grub.
The only exception to a normal install is that sda1 is formatted with ext2 (to avoid journaling). I have had 11.1 running on that drive for several months without problems so there is no reason to believe it's a hardware problem.
Can I abort at this point and perhaps fix it from a live boot?
View 1 Replies
View Related
Mar 18, 2011
My system configuration is: Intel Core 2 Duo @ 2Ghz, 2Gb of RAM, Nvidia Geforce 9400 GT, Tv tuner Winfast PVR2000 XP Expert (autodetected according to the installer)
I never had a problem while installing openSUSE untill openSUSE 11.4.
All goes well while installing and configuring the network card, sound and even display(under nouveau). The problem is at the tv tuner. After i adjust some settings to it and pres OK so that the installer can save the settings all goes wrong. The installer freezes and i have to reboot the pc.
After repeating the configuration procedure and skiping this step, configuring the tv tuner using Yast this time, leads to the same thing: desktop freezes and i had to reboot because nothing is reponding anymore.
View 3 Replies
View Related
Nov 26, 2009
I just installed Opensuse 11.2, and have come across the following error upon bootup: the display manager screen refuses to load, unless I type STARTX at the cli line. the error messages read: failed services in runlevel 5 /etc/init.d/xdm.orig start returned 6 earlyxdm postfix Further, I am unable to activate the xdm service under Yast. Has anyone else run across this error? Not sure how to resolve.
View 9 Replies
View Related
Nov 17, 2010
this problem is a well known one as far as I have read, but the solution is yet to come.I formatted and installed OpenSuse 11.3 KDE as the only OS on a PC with 768 RAM, two Hard Disks (6+8 GB), mobo Abit BE6, processor Celeron Coppermine 1100Mhz (with slotket adapter), video card Matrox G400+, Sound Blaster Live! Value.HD 1 is set root and ext4 + 1 GB swap, HD2 is /home ext3.The live OpenSuse CD worked fine, shutdown turns off the power, while the installed one won't. I formatted twice, and the problem persist. Reboot works fine.At shutdown, the hard disks are turned off while the screen and power are still on, so I have to press the power button to turn off completely.
Yesterday I wasted all the day with this problem without solving it, I've read many threads but no solution worked. That PC obviously worked fine with both Windows 98 and XP.Those problems are in the "out of the box" installation, without any setting altered.I've tried disabling ACPI, PM control by APM, and power management features in the bios (latest 2001's Award bios for this old mobo).I've set alternatively pci=noacpi, nosmp, apm=power-off, acpi=force in GRUB options. I've updated the distro. I've set value poweroff for HALT in etc/sysconfig. Nothing changed.I've also tried macumba and ancient celtic cerimonies, yet they didn't work.Is it possible to solve this problem or it's a known unsolved bug? Loading OS screen:Those are the final screens after shutdown where it stops
View 7 Replies
View Related
Jun 19, 2011
system will not display (screen is black). I did disable the nouveau driver (I think) and I do have Nvidia graphics card.Messages:
1) Starting Avahi daemon - error while loading shared libraries: libavahi-corre.so.6: cannot open shared object file: No such file or directory
2) Starting smartd /user/sbin/smartd: error while loading shared libraries: libstdc++.so.6
3) Starting Firewall Initialization (phase 2 of 2)... error while loading shared libraries: libstdc++.so.6
Can you please help me figure out what I need to do to get the display? I really appreciate it! If not, I can do a clean install of 11.4, I think.
View 6 Replies
View Related
Jun 22, 2011
I using CentOS-5.5 and having problem with rpm command. rpm -qa does not display anything. rpm --rebuilddb does not reply anything. If i put -vv option it display below contents.
[Code]...
View 1 Replies
View Related
Oct 17, 2010
I just fresh installed openSuse 11.3. Am trying to install Hupervisor and Tools but during the install I get the message that xen itself can't be installed while it needs 20MB space.My boot partition is already maxed. At least that is what the partitioner is telling me that 70MB is the maximum setting.
View 2 Replies
View Related
Feb 23, 2010
both root and home partition have suddenly become corrupt, and the repair tool from the installation disk just loops (Do you want to repair? Yes! Do you want to repair? Yes! Do you...).
Code:
[ 54.209685] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 54.209758] ata1.00: irq_stat 0x40000008
[code]....
View 9 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Jul 21, 2010
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
May 16, 2011
Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.
But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.
View 1 Replies
View Related
May 22, 2011
I m try to explain the structure I tried to use here:Symptoms: Describes what is happening right now What happened: Describes the history leading to the problem My tries so far: Describes, what I did (so far in vain) to clean up the problem Questions: I already searched the forum (see "My tries so far") but missed to write down the URLs for the threads. (So they aren't mentioned under "My tries so far")
Symptoms: The system boots up ok, I get to the KDE login, but for both my user account and the root account, the login fails. After entering username and password a progressbar comes up. This gets to 3/4 (if I counted the steps correctly) then stops. If I wait for several minutes, the screen will finally just turn black. (It is *not* switched to suspend or somesuch by DPMS; I didn't wait for that turning black in all tries described below) I can login on a console into the system.
System Intel CPU Core2, E6750 Suse 11.4, 64 Bit (both original and backup system) Kernel: Linux 2.6.37.1-1.2-desktop x86_64 (backup system) / vmlinuz-2.6.37.6-0.5-desktop (original system) KDE: 4.6.00 (4.6.0) "release 6" (on the the backup system, because I don't know how it get the info as long as I can't login to KDE)
[Code]....
View 9 Replies
View Related
Jul 7, 2011
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
View 5 Replies
View Related
Apr 4, 2010
My default display (DF-770 monitor) comes up something like 1280x960. In the "configure desktop" > display I set the display to 1152x864@75Hz. Next I accept the setting after the preview. When I reboot, the display is back to 1280. Do I have to manually edit some file to make my selection permanent?
Sysconfig editor has a variable that starts off with 1024x768, but that doesn't seem to be my problem, so I didn't mess with it. How do I get my display preferences saved?
View 5 Replies
View Related
Aug 8, 2010
Continuing with my 11.3 install on an old Toshiba Tecra M1 laptop:
When i was installing, i had the options of 1600x1200, 1280x1024, 1024x768 etc.
I chose the 1024x768, because it fit the laptop screen perfectly.
But after the installation, the highest resolution i get is 800x600, and it's wasting a bunch of real estate on the screen.
I mean, if during installation it could do 1024x768, why not after the install? obviously the graphics card supported it.
View 3 Replies
View Related
