Hardware :: Unable To Use Nvidia Driver With Fedora 11?
Oct 3, 2009
My system specs are..
OS: Fedora 11
CPU: Core2Duo E6750
GPU: Nvidia GeForce 9500gt
MOBO: A-Bit IP35-E
Now, i had an ATI Radeon x1950 and was using the open-source drivers with Fedora 11 and worked fine apart from maximum resolution was 1024x768. So knowing that Nvidia's Linux support was far superior i shelved out on a new GPU the GeForce 9500GT. I tried "yum install kmod-nvidia" - restarted and then the system loads using the nouveo drivers... So i blacklisted the nouveo drivers and changed the xorg.conf file to use the nvidia driver. Restarted, now its using the vesa driver! Blacklisted the vesa driver and after restarting its still picking up the vesa driver! So... i then head to nvidia's site, download the latest driver from there, shut down X-Server, installed them, restarted..... and still using the blumin vesa drivers!
View 4 Replies
ADVERTISEMENT
Dec 4, 2010
I was running Fedora 13 on my old computer with a nvidia Geforce FX 5200 graphics card using the nvidia-173xx driver from fusion. After upgrading to Fedora 14 (the first day of its release) the X server wasn't working anymore, the screen just froze up after the progress bar. With Alt+F4 I "moved" to text mode and gave the startx command, but I got the fatal error message that there was no usable configuration detected. I deleted the xorg.conf file and afterwards I was able to start X again. I use the nouveau driver now, but it doesn't nearly work as good as the nvidia-173xx driver. I have it installed, but when I try to activate it (by running nvidia-xconfig as root) the X server doesn't work again after restart, and I have to do the same thing all over again.
View 6 Replies
View Related
Sep 29, 2010
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
View 4 Replies
View Related
Jun 15, 2009
I am a new user of Fedora 11. I am a Ubuntu user and could not get my GeForce 9100 on board graphics to work on my new computer with out crashing my computer so I decided I would try fedora. I downloaded the driver from NVidia and I am attempting to install it (Fedora didn't automatically find the driver). I get the following message:
"Error Unable to find the system utility 'ld'; Please make sure you have the 'binutils' installed. If you do have the bin utils installed, then please check that 'ld' is in your PATH."
I am running the driver from $Download as root. I don't know what ld or bin utils is or the check if I have it or if it is in my PATH.
View 9 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
May 28, 2010
I just performed a clean install of Kubuntu Lucid earlier this week after deciding it was time to upgrade from Hardy. Pretty much everything worked, until I attempted to install the proprietary NVIDIA driver.
OS details: Kubuntu 10.04 x64 Kernel 2.6.32.22.What happened when I tried to install the proprietary nvidia-current package was simply that it didn't work. I could open the nvidia utility, it would say the driver was not in use. Attempts to force the issue by running nvidia-xconfig would render the X server unable to start, which gave me some quality time in a shell console with APT or restoring the xorg.conf file from backup. Trying to compile and install the driver from nvidia also wasn't working out so well.
I think the issue boiled-down to the install presumably attempting to upgrade the kernel during initial install from CD, but not doing so completely. I had all the appropriate 2.6.32.22 kernel and header packages, but GRUB was apparently still booting to the 2.6.32.21 kernel (which had no headers or anything) and not giving options to boot to the upgraded kernel.
How I fixed this was to remove all packages related to the 2.6.32.22 kernel via APT, then remove all the 2.6.32.21 kernel packages. That second operation triggered the 2.6.32.22 kernel to be reinstalled, and GRUB to be configured correctly to boot to it. At that point, I reinstalled nvidia-current, and it worked. I tried this after determining I was on the 2.6.32.21 kernel, and had no option to boot to the 2.6.32.22 one.
Your mileage may vary. In retrospect, I probably could've fixed it by fixing GRUB to boot to the current kernel. This appears to be a consistent issue, as I reinstalled at one point, just to start over, and went through the same thing again.
I suspect the driver I obtained from the nvidia website and patched (due to issues it has with recent kernels) might work now that I'm booting to the correct kernel with headers, but I think I'll save that for another time since nvidia-current is working great for me at the moment.
View 4 Replies
View Related
Dec 19, 2008
I recently reinstalled Debian on my desktop to migrate to 64-bit. Everything was working swimmingly before but I've encountered a bizarre error i have never seen before. After installing the Nvidia driver and rebooting when X comes up it complains it cant find any screens. However, if I kill X and start it again it starts with no issues. I also have an odd message at startup which might be part of the problem as well.I'm running Debian Testing AMD64 with and Nvidia 9800 GTX+. I compiled 2.6.27.8 for the install.
For what its worth the Nvidia module is showing up for lsmod so I don't really know what is wrong. I have tried reinstalling the nvidia driver as well which didn't help. The error message during bootup is:
Code:
Loading kernel modules...Usage: modprobe[-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] [ --dump-modversions ] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
[code]....
View 5 Replies
View Related
Oct 15, 2010
i tried to go threw this by some tutorials on the wiki but without success. i all the time got this error: Nvidia log: [URL].. even if i ran the make oldconfig && make prepare command..
View 8 Replies
View Related
Feb 16, 2010
I installed openSuSE 11.2 three days ago, the first time, and have been trying to get the nvidia video driver to work ever since. So far, no luck. I have a dual-boot system with Windows 2k (legacy programs) and the graphics card works fine there, so the problem isn't hardware related. The nv driver also works under 11.2, but not well.The graphics card is a GeForce 6200, and the computer is an old Tyan Thunder S2885 with dual Opteron processors. I'm in 64 bit mode for the Linux install.
I've tried installing the video drivers by:Doing a fresh install, loading in the nvidia repository, then doing online update. The two nvidia drivers were loaded (nvidia-gfxG02-kmp-desktop and x11-video-nvidiaG02), but when I tried to reboot I end up with a blank screen and no sync to the monitor (Hitachi SuperScan Elite 751 CRT type). Rebooting in safe mode brings up the nv driver, which works. Doing a fresh install, doing online update,then loading in the nvidia repository, refreshing it, and installing the same two RPMs . . . with the same result. Doing a fresh install and using the "one click" install from this web site. Same result.
Doing a fresh install, doing online update, selecting the pattern "Linux Kernel Development" and installing it, downloading the Nvidia installer NVIDIA-Linux-x86_64-190.53-pkg2.run and installing it. Same result.
Same as above, but then using Sax2 -r -m 0=nvidia, even though Sax is depreciated. Same result. I've tried modprobe nvidia. Nothing. Over the last two days I've probably tried several other iterations as well, and forgot them, but nothing worked, it's always the same result.
Another weirdness, when I have YaST do "Hardware Information" it has no trouble identifying the monitor a getting it's info, but when I click the Display icon on the panel it tells me that it can't identify the monitor.
Here's the basic system info:
Code:
Directory: /home/BillyDoc/Desktop
Tue Feb 16 09:21:23 CST 2010
BillyDoc@linux-k7w3:~/Desktop> lsmod | grep nvidia
nvidia 9647368 0
BillyDoc@linux-k7w3:~/Desktop> su
[code]....
I'm definitely a novice to this sort of thing, and at this point I haven't a clue what's going on. It looks like the nvidia driver get's installed alright, but X simply doesn't know it's there. Oh, and another thing. When I go into YaST to look for the "Graphics Card and Monitor" program . it's missing! I assume this is because Sax is depreciated, but what's the substitute?
View 9 Replies
View Related
Mar 4, 2010
This is my first day with Umbuntu and my first post here at the forums. I bought a Dell Pentium 4 with a fresh install of Umbuntu 9.10 on it. Worked well until I decided to do something a newbie shouldn't do and install a graphics card and drivers. The graphics card worked just fine until the drivers were installed and I tried to reboot the system. Now it no longer boots. Some specifics for you.
Since my time with Ubuntu is limited to hours, the nomenclature will probably be wrong. But I will try to get the point across. The card is a EVGA GeForce FX 5700 Ultra. On first start up with this card the computer functioned fine. I went to a place where you could change the screen options. There were three selections and I don't remember the names (idiot that I am). I selected the middle one. The OS stated that in order to utilize all the capabilities of nvidia graphics cards blah, blah, blah, a driver would need to be downloaded and activated. No name, just a driver. OK, do it (sounds kinda windows like). The download seemed to go OK, but now I needed to reboot to activate the driver.
Now: Ubuntu logo comes up. Screen goes to a text screen that says:
Ubuntu 9.10 dave-ubuntu tty1
dave-ubuntu login:
This screen flashes and does not take input from the keyboard or mouse. Next, I removed the graphics card and used the on-board graphics. Same result with faster flashing. What have I done? Apparently Ubuntu and Linux in general don't have a system recovery option? I read something about the GRUB menu, but the system flasher GRUB loading for half a second and then is on to locking up. I can't seem to get to a GRUB menu. What a way to finish the day.
View 9 Replies
View Related
Mar 9, 2011
I installed the Nvidia driver for the on board GeForce 7025 / nForce 630a the "Debian way", according to this link Debian Nvidia Howto. The problem is that the only available screen resolutions are 640x480 & 320x240 and I need something more like 1024x768. The driver is installed correctly, or at least is properly recognized, as in Nvidia Xserver settings, GPU0 appears as GeForce 7025 / nForce 630a.
Here's the xorg.conf file.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
[code]....
..only causes gdm not to start.On my Ubuntu partition, I have working the proprietary Nvidia driver (file: NVIDIA-Linux-x86_64-260.19.36.run), and have had no problems from it at all. I was going to install this same driver onto Debian when I read several pages advising to go the "Debian way".
View 4 Replies
View Related
Feb 10, 2011
I am not able to enable composite with the nvidia driver. And a few other issues that I been able to get around but so far the nvidia driver is my main problem.
View 21 Replies
View Related
May 28, 2011
I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
View 9 Replies
View Related
Sep 25, 2009
I was recently able to obtain a new laptop at work. Rather than reinstalling the OS, reconfiguring all of the software, and then copying over all of my data from my old laptop -- I decided to try to use dd to clone my drive. It worked pretty darn well (thanks Saikee!). However, I have two problems that I have noticed so far:
1) The system does not seem to offer me the option to install the proprietary nvidia driver. I was able to manually install the nvidia-glx-180 package and then edit xorg.conf appropriately and I'm running with the nvidia driver now. So this problem is resolved (though I still find it odd it didn't even offer my the "restricted hardware drivers" option in System -> Administration).
2) Wireless is not working. I checked dmesg and it doesn't seem to have any errors in it. Here is a list of things I have checked/found which I think might be relevant:
- Oddly enough it seems that my wired device always gets renamed from eth0 to eth1, and my wireless device gets renamed from wlan0 to wlan1. I'm not sure why (though I would prefer them to be eth0 and wlan0).
- dmesg output looks good shows some message about the wlan1 link not being ready
Code:
bmayes@bdmlin:~$ dmesg | grep wlan
[ 10.915831] udev: renamed network interface wlan0 to wlan1
[ 185.179556] bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
[ 185.179559] bridge-wlan0: attached
[code]...
View 10 Replies
View Related
May 4, 2010
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
View 12 Replies
View Related
Jul 9, 2011
Infact I've seen the linux(ubuntu 11.04) for the first time today. I don't know anything about linux & i'm not able to install my nVidia 8600gt graphics driver. I've downloaded the .run file from here
[URL]
when I'm opening the .run file it's showing an error
"Could not open the file /home/f1/Downloads/NVIDIA-Linux-x86-275.09.07.run.
gedit has not been able to detect the character encoding. Please check that you are not trying to open a binary file. Select a character encoding from the menu and try again."
After trying for all day long I found this HOWTO
[URL]
View 2 Replies
View Related
Nov 3, 2010
I have been unable to find a driver for my nvidia geforce2 mx400. It's running in failsafe graphics mode. Does anyone know what I need to do to make it work? I'm a linux beginner, so please avoid jargon.
View 2 Replies
View Related
May 12, 2010
So after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
[Code]....
View 9 Replies
View Related
Aug 6, 2011
I had installed Ubuntu 10.10 and there was a dim spot on the left side of the monitor. I could move the window to the right, but anything on the left was dim, and if I set the window to full screen, the whole screen went dim. I was able to find a fix online, I followed the instructions, and Voila! It was fixed, so I knew it was not a hardware issue. I installed 11.04, and have the same dim screen issue, but I can't find the instructions that fixed it last time. I tried to download and install the latest driver from NVIDIA, and I get this error:
ERROR: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at www.nvidia.com. If anyone has any fix for the dim screen
View 4 Replies
View Related
Dec 15, 2008
The rest of the message is " located in /lib/modules/2.6.24-16-server/build". The version is Ubuntu server 8.04. Why can't it, and how can I help it along?
View 9 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Jan 22, 2010
I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
[Code]...
View 2 Replies
View Related
Feb 9, 2010
I've installed the nvidia driver from nvidia website. I don't want to mess up my system So my question is how can I uninstall this nvidia driver? (I want to install the one from youm repo)
And my second question - when I'll be installing my nvidia drivers from repo, this is the best way to go: [URL]
View 7 Replies
View Related
Nov 24, 2010
I'm somewhat new to Fedora but not Linux in general. I went to install the nvidia driver as per any instructions I found on the internet that yielded results. I typed sudo yum install kmod-nvidia and eventually got a driver, blacklisted nouveau, restarted, and finally got compiz and all my desktop effects.
The problem was when I played Minecraft, which for those who don't know is a game, from a .jar file. After ~5 minutes of playing something happens and everything freezes. Video completely stops but I still have mouse control and sound(at least for anything already running). Clicking stuff does nothing and no hotkeys work to bring up anything at all. I end up having to do a reset by hand to get anything done. Turning off desktop effects didn't help.
Why is this? Did I install the wrong driver, even though kmod-nvidia should find the right one on it's own? nvidia 8800 GT is my card. Could it be the java program screwing things up royally? I can't remember if the program worked fine on it's own before the driver install, but uninstalling the driver now causes the game to fail on launch, which I guess makes sense but can't figure out if it's simply the lack of driver or if removing the driver screwed something else up. I might just reinstall fedora and start from scratch again, but before I did that I wanted to find out if I'm just installing the wrong driver and can simply find teh right one to fix all of this.
View 8 Replies
View Related
Dec 16, 2010
I am stuck with Fedora 13 due to the fact that clutter has some nasty bug which colides with the nvidia binary blob driver (I _require_ CUDA _and_ usable 2D/3D). So the new version is out since some days ago but not yet in rpmfusion. So did anyone give 260.19.29 a shot and does the 2D/3D UI still lag?
View 14 Replies
View Related
Oct 6, 2009
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
View 8 Replies
View Related
Oct 9, 2010
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
View 1 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Jan 28, 2009
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
View 14 Replies
View Related
Mar 19, 2009
I have set this up before (ie installed the drivers and had them working perfectly) but had to do a system wide re-install of fedora. Since this clean install, I've had non-stop grief with nVidia drivers. They have been downloaded and installed via yum, and on start-up nvidia.ko loads. But from with gnome I cant gain access to any 'special effects' (ie desktop effects wont enable).
View 4 Replies
View Related
