Hardware :: Migrated To Debian Unstable With KDE 4.4?
May 17, 2010
I've just migrated to Debian unstable with KDE 4.4 and it's all fine except that I have no sound in certain cases. The default settings in the KDE Multimedia section had pcsp (Internal PC speaker) as the first device listed everywhere, so I had no sound anywhere at all (except the sound test button).
After placing the sound card on top, I got sound in JuK and KDE login/logout sounds, for example, but there's still no sound in VLC or when viewing Flash videos (games seem to have no sound, too).Another thing is that unless I mute the Beep channel (using KMix), I hear awful screeching even if nothing is playing. Muting the chanel stops that.I had no such problems running sidux + KDE 4.3.
View 4 Replies
ADVERTISEMENT
May 5, 2010
What is the recommended way to do updates when running sid (especially those involving updates of xorg or desktop environments as they should not be running at that time)? I imagine this would be safe:
1. # apt-get update
2. # apt-get dist-upgrade -d
3. Switch to a text mode terminal (say, tty1).
4. # /etc/init.d/kdm stop
5. # apt-get dist-upgrade
Or simply using init 1.
View 14 Replies
View Related
Jul 25, 2015
I just upgraded from Debian 8.1 stable to testing and finally to unstable, looking for latest software.However, I cannot find sources for security or software updates, the only repository that works from me is
Code: Select allhttp://ftp.debian.org/debian/ unstable main.
View 3 Replies
View Related
Mar 16, 2010
I was trying to install debian etch in my laptop, but it seems that the kernel 2.6.26 has a bug related to the ACPIC Timer and the HDD controler, so the installation in some part is freezed, so, I found that in the kernel 2.6.3xx the bugs are gone, it looks that i have to install unstable or testing, searching in the wiki is not enough clear for me what should I choose, so my question is:based in your experience, which is better to choose unstable or testing? I would use the laptop to code in LAMP, postgreSQL, J2EE and do some excercises related to networking services: SSH, DNS, iptables, etc
View 7 Replies
View Related
Aug 15, 2010
I noticed that Sid/unstable (Gnome - kernel 2.6.33 - xorg 1.7) does not use xorg.conf file for X driver. The X driver seems to get detected automatically by the kernel and xorg, which is done perfectly even with 3D support. But I noticed that it uses the xorg.conf file for the input devices. When I renamed it, the keyboard and mouse were disabled. Is there a way to get the input devices detected automatically also and get red of xorg.conf file completely?
View 5 Replies
View Related
May 26, 2011
why transmission 2.22 (12099) not pushed to unstable when it had been packaged and pushed to experimental sometime back (10-04-11) . The changelog suggested that it is/was due to libevent >= 2.0.10 dep
The Debian changelog
transmission (2.22-1) experimental; urgency=low
* new upstream release (must go to experimental because of
libevent >= 2.0.10 dep) (closes: #614069)
[code]....
View 3 Replies
View Related
Jan 8, 2010
My wireless card works most of the time, however with prolonged usage results in a temporary halt in functionality. I am not sure how to go about diagnosing or solving the problem, and I do not know what information I should be providing.
View 5 Replies
View Related
Aug 1, 2011
how one can find the number of packages in the main archive for amd64 distribution on say sid/unstable ? Also if its possible to know the number of packages in amd64 distribution at a specific point in time (whenever I update my index) .
View 1 Replies
View Related
May 17, 2011
EDIT: This thread has taken a different turn, please go down to viewtopic.php?f=30&t=64242#p370832 Below is I originally wrote, now totally irrelevant.:D I am delighted/bored with my one Debian Squeeze install, so I've decided to free up a partition to play with another configuration of the universal OS.At the moment I am liking the looks of the supposedly not so unstable Sid; what's the ideal download/install path to get Sid up and running? Is it:1) I already have a live Squeeze GNOME DVD lying around; should I install that again and upgrade to Sid?
View 6 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Jul 10, 2011
started using debian for the first time and I have a problem. I've installed Banshee from the stable repository (only stable main contrib and non-free are in my sources.list) but when i start the program it says:
Running Banshee 1.6.1: [Debian GNU/Linux unstable (sid) (linux-gnu, x86_64) @ 2010-12-02 15:13:12 UTC]
error: line 3: bad flagvector
[code]...
View 2 Replies
View Related
May 11, 2011
Since I move from opensuse 11.3 to 11.4 Evolution adressbooks do not workI appreciate any tips in howto fix addressbooks or how to migrate address books. Evolution 2.30.1.2 (OS 11.3) has the data in ~./evolution while Evolution 2.32.1 (OS 11.4) has the data in ~/local/share/evolution.These are observations from what I have tried.1. The backup from Evo 2.3O.1.2 does not work under restore in 2.32.12. If copy ~/.evolution and ~/.gconfig/apps/evolution form 2.30.1.2 to 2.32.1 (that was the way to migrate under 2.30 and before).
2.1 the setup is transfer and works2.2 the mail is transfer and works (including the folders)2.3 the contact folders are corrupted: some can not be open, some work, some can not be deleted. I change permission without any success. 3. I delete ~/evolution (which has no effect in the new evolution), ~/.gconf/apps/evolution and ~./local/share/evolution. Then I reboot. (this is key) After I start evolution everything is new. I can make contact folders and they seems to work fine. I can add and delete contacts etc. Now If I import vcards created from evolution 2.30.1.2as way to preserve all the contacts)and try to restore the folders something weird happens: the contacts transfer to the folder specified but they are also transfer to the other folders. If I delete the contacts in one folder all the duplicates are also gone. If I tried to delete the folders I can not do it
View 1 Replies
View Related
Sep 26, 2010
Yesterday I migrated from 11.0 to 11.3 (32-bit version) and began customizing personal desktop settings once everything seemed to be working OK. Today I continued customizing the personal desktop settings. Now everything freezes up during shutdown.
The screen goes blank with the arrow pointer frozen in place. Hitting enter or ctrl-alt-esc has no effect. One time, I walked away for 30 minutes to see if it would resolve itself, but there was no effect.
I saw someone is having a similar problem with the 64-bit version, but there were no responses. Where do I go from here?
View 3 Replies
View Related
Mar 10, 2010
I've just replaced my Windows XP for Ubuntu on my desktop computer and I'm now looking for a torrent client that has some useful features that I miss from uTorrent, such as:
- Queuing torrents
- Setting bandwidth priority for multiple files within a torrent
- Auto-shutdown when finished
- DHT
- Bandwidth control
View 9 Replies
View Related
Oct 6, 2010
Trying to move from squeeze to unstable -- my downloads add up to some 700 M or so.So I am trying to batch the upgrade:Some of the big-fellas are openoffice and texlive:So I didsudo aptitude hold '?name(openoffice)'sudo aptitude hold '?name(texlive)'Is that fine or are there some pitfalls to this?
View 5 Replies
View Related
Apr 20, 2011
I made the terrible mistake of upgrading my live Debian Lenny web server with the the dist-upgrade option in apt-get. I didn't realize this was actually an unstable upgrade and now I have had to make all sorts of choices of what configuration files to keep or upgrade ect. The apache conf files were actually bad after the upgrade and I had to replace them with the backups (phew) and the system is currently still up and running. However my virtualmin installation is no longer working due to a issue with perl ( but thats another question I guess to ask somewhere else maybe ). Anyways... I'm very scared to restart because my server is co-located somewhere else and Im the only one who has ever worked on this server so I would need to go there and fix it myself if it doesn't restart. Basically I have two questions.. is there an easy way to move back to stable packages..If so is this recommended?
And also I'm currently trying to fix some broken dependencies in the package manager but when I run "sudo aptitude -f install" It keeps telling me it is going to remove all of these packages (listed below), some of which I know are very important to the system and I cannot figure out why it would keep trying to do this. I get an error on "phonon-backend-xine" whenever it tries to upgrade just saying this
"(gtk-update-icon-cache:12343): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory"
I installed some desktop related packages a while back like gnome-desktop and I know the package is related to this, but all I really care about is making sure the server stays online and not about the desktop packages. I tried just removing kdebase-runtime and anything else that is dependent on it, but it wont let me do anything at all without fixing this broken package.
I really would just like to go back to lenny stable again but I know its probably too late since I already had it install a new kernel and grub 2 (auto configuring my new grub.list)..
[Code]...
View 1 Replies
View Related
Jul 14, 2011
I'm going to start using Debian as my desktop system rather than Ubuntu since I'm not really liking all the crazy eye candy and just wanted a fast and simple system. My main problem is networking, I guess I'll start off with my system specs and other information for problem solving.
My specs are:
- Intel Core i7 2600K CPU
- Gigabyte Z68X-UD3P-B3 Motherboard
- 8GB DDR3 1600Mhz RAM
I have a Realtek RTL8111/8168B Ethernet Adapter builtin to my motherboad which I am using, I could only get a basic connection, by basic I mean that it allowed me to connect to my local area network but not the internet. I then modified /etc/NetworkManager/NetworkManager.conf to change to managed=true this allowed me to use the internet, but the problem is, that it is a very unstable connection, the speed is very slow and it drops a lot! I have to carry on running /etc/init.d/network-manager restart twice to get my connection back, which lasts for about a minute.
output of lspci | grep -i eth
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Output of cat /var/log/dmesg | grep -i eth
[ 1.414250] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.415080] eth0: RTL8168b/8111b at 0xffffc90000c7c000, 1c:6f:65:c5:7c:34, XID 0c900800 IRQ 31
[ 9.213351] r8169: eth0: link up
[ 9.213392] r8169: eth0: link up
[ 13.813496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
View 1 Replies
View Related
Aug 23, 2011
Recently, I installed VVVVVV and discovered that when attempting to use fullscreen mode, the monitor displays "video mode not supported" for 640x480, 800x600, 1024x768, and auto. After googling around for an hour or two (and only finding stuff from 2008-09) I have created a new xorg.conf from Xorg -configure and nvidia-xconfig. This doesn't seem to have had anyeffect.DebianRelease unstable (sid)Kernel Linux 3.0.0-1-amd64GNOME 3.0.2GeForce 7600 GSMonitor: Hyundai Imagequest
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (pbuilder@cake) Mon Aug 8 15:37:15 UTC 2011
[code].....
View 4 Replies
View Related
Jul 1, 2010
I dist-upgraded my Debian unstable and 'cups' removed the official drivers ('cndrvcups-common_2.00-2_i386' and 'cndrvcups ufr2-uk_2.00-2_i386'). Well, now my network Canon i-SENSYS MF4120 multifunctional printer/scanner doesn't work and the drivers can't be installed back
View 11 Replies
View Related
Aug 7, 2010
How can I convert eth1 back into eth0 on Fedora 13? I searched /etc for eth1 and found it in 70-persistent-net.rules, but eth0 is still in the ifcfg scripts.
View 5 Replies
View Related
Nov 20, 2009
I am using the Redhat Cluster Suite (luci and ricci) on my centos 5.4. i have 2 nodes in a cluster.I had clustered an apache server.The service is up end running and i can stop,start and switch on all two node.The problem is when i try to simulate a fault for one node.For example:The apache resource stay on the first cluster node.If i power off the first cluster node (not halt or init 0 but take off the eletric power off), the second cluster node not take the resource.With the clustat command, the service still running on the first node.But the service is down. The first node is dead.Only one the first node is join again the cluster the resource goes up on the second node.
View 7 Replies
View Related
Feb 16, 2011
while trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
dpkg -i --force-depends wine_1.1.42~winehq1-1_amd64.deb
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
View 2 Replies
View Related
Nov 29, 2010
The latest in experimental is 1.1... the stable by upstream is 1.2 and the latest unstable is 1.3. So is there a repository where I can get the latest unstable automatically?
View 7 Replies
View Related
Feb 4, 2010
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
View 4 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Jul 30, 2010
Has anyone else experienced problems with KVM in the last few days?
I've been running KVM VMs for the last year. Until sometime in the last few days they've been working fine. I have three F13 systems that I'm running KVM on, an iCore7 with a CentOS5.5 VM, a Core 2 with a CentOS5.5 VM and another Core2 with an XP VM. I haven't seen any problems with the iCore7 system but the two Core2 systems are both exhibiting serious problems.
The CentOS VM is hanging. I can ping it but I can't ssh into it anymore. Prior to that state I was able to ssh in put I couldn't do a ps. Eventually I couldn't ssh in anymore. This is repeatable, I've rebooted the system a couple of times and restarted the VM, it always crashes in the same way.
The XP VM is running but the networking is behaving strangely. Basic networking is working but I can't access the Workgroup although I can access network mounted SAMBA shares that I had previously setup. This could be a SAMBA issue but it started happening at the same time as my other problems.
Another problem that I had was that the virtual disks on multiple VMs on both systems became unbootable. I was able to fix this by removing the disks and then adding them back.
View 2 Replies
View Related
Feb 2, 2010
In one of the last KDE 4 updates, or perhaps when moving from intrepid to karmic, using the application "clusterssh" has become completely unstable. Some of the symptoms I have experienced:
1. Window focus problems. Clicking on a single xterm window from a group of xterms controlled by clusterssh does not switch focus to that window. Focus stays on the clusterssh application, so output is still directed to all xterms. Previously, I could interact with a single xterm, or with all of them.
2. Clipboard problems. After using clusterssh for awhile, and perhaps using the clipboard within clusterssh cutting and pasting between other applications completely fails. The only work-around is to completely log out of your kde session, hence killing your clusterssh sessions.
3. xterm window manipulation. At some point during a clusterssh session, all xterm windows become locked in place. You can't move them at all. This also leads to focus problems described above. The work-around for this is to switch virtual desktops, and then switch back to your clusterssh session, and now the windows can be manipulated and re-organized again.
View 3 Replies
View Related
May 28, 2010
I newly made clean installation of Ubuntu 10.04 and I previews had Ubuntu 9.10 installed. When I made clean installation of Ubuntu 10.04 and looked into syslog, dmesg and kern.log I could see clocksource tsc unstable and CE: hpet increasing min_delta_ns. In every boot.
Here is some information:
[ 0.176965] ACPI: Interpreter enabled
[ 0.176974] ACPI: (supports S0 S3 S4 S5)
[ 0.176998] ACPI: Using IOAPIC for interrupt routing
[ 0.180063] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.183061] ACPI: Power Resource [FN10] (off)
[Code]...
View 1 Replies
View Related
May 5, 2011
I have a Linux box with Ubuntu 10.4 that I use basically to play music and download files. It doesn't have a monitor or keyboard, the only way I access it is using Ultra VNC. Yesterday, the automatic update service offered to update Vino (among other things) to version 2.28.2 and, as usual, I accepted.
After the update Ultra VNC has had trouble negotiating the protocol with Vino. The only way I got it to work was to force using Tight as the compression method, which provides a crappy image quality. Besides that, at some unexpected moment, the connection just dies.
Can anyone help me to:
1.- Solve this issue with the current Vino version or
2.- Go back to the previous version that was working perfectly.
View 1 Replies
View Related
Mar 5, 2010
I am using some unstable set of kde packages with opensuse 11.2-i586, at the moment the version number is
KDE 4.4.62 (KDE 4.5 >= 20100203).
That I have these packages is due to some misconfiguration / error, and I would like to replace them with something stable, say kde 4.4.1. I had a look into yast, found an option like "use these (kde 4.4) packages as system packages", but run into numerous compatability issues afterwards so that I can't make the switch.
So my question is: How can I replace the unstable kde 4.5 packages with kde 4.4.1? I don't know suse very well, so if there is some step-by-step description available somewhere
View 1 Replies
View Related
