Debian :: How To Get Rid With Xorg.conf In Sid/unstable

Aug 15, 2010

I noticed that Sid/unstable (Gnome - kernel 2.6.33 - xorg 1.7) does not use xorg.conf file for X driver. The X driver seems to get detected automatically by the kernel and xorg, which is done perfectly even with 3D support. But I noticed that it uses the xorg.conf file for the input devices. When I renamed it, the keyboard and mouse were disabled. Is there a way to get the input devices detected automatically also and get red of xorg.conf file completely?

View 5 Replies


ADVERTISEMENT

Ubuntu :: Create A Backup Of The Xorg.conf File - Cannot Stat /etc/X11/xorg.conf

Dec 11, 2010

I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed

[Code]....

View 8 Replies View Related

Hardware :: Xorg.conf Is Replaced With A Default Xorg.conf After Reboot ?

Apr 9, 2010

I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.

But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.

What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.

I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #

View 11 Replies View Related

Slackware :: Difference Between Files (xorg.conf And Xorg.conf-vesa)?

Feb 16, 2011

1. What is the difference between files (xorg.conf and xorg.conf-vesa)

2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from

[Code]...

View 3 Replies View Related

OpenSUSE Install :: Precedence Of Xorg.conf Over Xorg.conf.d?

Jan 26, 2011

I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:

in xorg.conf:

Code:

Section "Device"
Identifier "Device0"
Driver "nvidia"

[code]....

My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?

View 5 Replies View Related

Ubuntu :: Editing Xorg.conf - /etc/x11/xorg.conf Does Not Exist

May 3, 2010

I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.

View 3 Replies View Related

Debian :: Fresh Xorg.conf For Eee Pc?

Jul 19, 2011

i lost touchpad functionality during gdm login (i cant tap clicking) after playing with xorg.conf

would somebody kindly paste-ing their xorg.conf for eee pc (1000HE) ?

View 2 Replies View Related

Debian Installation :: PPC G4 Where Is Xorg.conf?

Aug 5, 2011

I just did a net install on an old powerpc G4 and it seems pretty successful.except i cant change any of the monitor settings from the control panel in gnome (or LXDE)its showing 'not recognised' and only allows 768 x 1024 in very restricted colour.I dont think there is a hardware problem:

- the monitor is a generic old CRT which has worked fine with everything before this.

- the display card is an AGP 32Mb - original with this G4 and was working.

- the computer works great in Mac OS10.3 - (but OS10.3 doesnt support flash or up to date web browser any more, hence trying debian).

i have searched debian forums and various sites, but i couldnt find a fix. It looked like i should edit xorg.conf file but I am not able to find it. I looked in /etc/X11 - but not there.could someone tell me please, do i need to find xorg.conf?

View 7 Replies View Related

Debian :: There Is No Xorg.conf File In 6

Feb 18, 2011

I install Debian 6 in my thinkpad W500.

W500 has two video card : Intel integrated and ATI discreted .

Now I am using Intel Integrated video card . I find no xorg.conf file in /etc/X11 .

How to make Debian 6 using two different video cards through changing BIOS setting ?

View 8 Replies View Related

Debian Installation :: Missing The Xorg.conf?

May 24, 2010

I'm somewhat spoiled by standard installations that do it all. This time I'm doing it more manually.I've installed a sid guest vm. I want to give it a graphical face, so for a change I've chosen the lightweight xfce.Only I'm missing the xorg.conf. I've installed xdm, so I have a login. However, it can't get in from there.It hasn't yet generated an xorg.conf in /etc/X11.Short of copying one, which I suppose I might try, How do you prompt debian to generate and configure the xorg.conf from scratch?Currently, I have

root@sid:~# tail /var/log/Xorg.0.log
(II) Xen Virtual Pointer: Found absolute axes
(II) Xen Virtual Pointer: Found x and y absolute axes

[code]....

View 7 Replies View Related

Debian Configuration :: DDC Versus Xorg.conf

Jan 18, 2011

I'm trying to get the latest Lenny running on some old hardware (a Winterm 3150se). Everything is working just fine except for two things.

When Gnome starts, it comes up at 1600x1200 resolution, which is too high for my monitor. It shows a portion of the right side of the display, If I select Screen Resolution, it gives me a few standard choices, but if I pick one, it acts like it's trying to honor my request, then comes back as 1600x1200 again.

My xorg.conf file had no references to Modeline, so I added a 1024x768 Modeline, not really understanding where the selection I was given was coming from. Anyway, it didn't help.

I can see in the log file that right after the entry about using xorg.conf, it says 'Module "ddc" already built-in', which must have something to do with it?

My hardware supports all the usual video formats, at least it does when it's running WinCE. Is there a way to force the use of xorg.conf or can someone tell me why DDC is acting like it's "read only"? Is DDC a file somewhere?

My other problem is that the Winterm refuses to not try to boot from the flash memory thumbdrive even though it's formatted as a non-bootable device - it's my SSDisk. I have to boot without the drive in, then slip in in just as the boot process exits the blue start screen. I can live with this problem, since it might be dumb hardware.

View 1 Replies View Related

Debian Configuration :: Xorg.conf Not Used In Kernel 2.6.38?

Apr 12, 2011

I just system-upgraded (testing) to kernel 2.6.38. All seems ok, except that a few things I added to xorg.conf in the past (basically, keyboard language switch) have no effect anymore. My xorg.conf is still there, it is still the same as before, but the changes I did in XkbdLayout section have no effect. It seems xorg.conf is not used anymore. I assume new version of xorg uses a different configuration file, but I'm not sure.

View 8 Replies View Related

Debian :: Create An Image With /etc/X11/xorg.conf Or Without?

May 2, 2011

I'm creating a squeeze image, it should be installed on about 20 workstations, the same PC's, but different monitors. create /etc/X11/xorg.conf, or is it better to prepare without?

View 2 Replies View Related

Debian :: When Editing My Xorg.conf - Add The Automatically Keyword ?

Oct 17, 2009

The owners manual of my monitor gives me the following informations:

When editing my xorg.conf, do I have to add the automatically 'keyword' ? (saw nothing about it in man xorg.conf or man nv)

View 6 Replies View Related

Debian :: ASUS P7H55M PRO : XORG.CONF Not Working?

Jul 11, 2010

I have installed debian testing squeeze, I have such issues, so no X11 working when startx

Code:

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,

[code]....

how to make the X11 working ? I have the console but well X11 is better and needed for apps such as skype

View 5 Replies View Related

Debian Configuration :: HowTo Configure Touchpad Without Xorg.conf

Feb 2, 2010

for some reason I got taping on touchpad is disabled after some software upgrade or something.I can enable it with synclient TapButton1=1, etc.. but have got to do it every time I reboot. Also, I don't have Xorg.conf file. Is there any way I can configure taping to work permanently ?

View 6 Replies View Related

Debian Hardware :: Configure Xorg.conf - Don't Get Required Resolution

Aug 17, 2011

I've created the file from new in /usr/share/X11 and then added to lines from GTF. I@ve restarted Xorg by killing the PID then restarting and I don't get this resolution unfortunately

[Code]...

View 6 Replies View Related

Debian :: Nvidia-xconfig Installs XF86Config Instead Of Xorg.conf?

Jul 10, 2010

just did a fresh testing install using the debian installer. i have gnome and an nvidia card. i installed the nvidia driver using the debian way outlined on the wiki. then i ran nvidia-xconfig and it generated an XF86Config file instead of an xorg.conf file. everything works, but shouldnt it be an xorg.conf and if so, maybe it isnt reading the XF86Config file at all?

View 10 Replies View Related

Debian :: Screen Resolution \ Tried To Change Xorg.conf, But Got No Success?

Jun 18, 2010

I installed debian 5 in a pc with a Intel 4 series VGA. The optimal resolution for the monitor is 1360x76, but the system does not allow that. I tried to change my xorg.conf, but got no success.In my xorg.conf I used this:

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"

[code]....

View 9 Replies View Related

Debian Configuration :: Edited Xorg.conf, Now Lost Some Keyboard Functionality?

Jul 8, 2011

I tried to edit my xorg.conf to try and encourage Debian to handle my joypad better (stop recognising it as a mouse). However, it didn't work and i couldn't get back into X.So, i entered recovery mode and deleted the contents of xorg.conf,got back into X and then edited xorg.conf back to how it was.Right so far so good.Yet, now i cannot use the backlash key in keyboard shortcuts. I have a number of shortcuts set up to incorporate this key and they no longer work, neither in GNOME nor Openbox

View 2 Replies View Related

Debian Multimedia :: Xorg.conf To Get Back I915 Native Resolutions?

Jun 11, 2011

I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.

[Code]....

Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.

View 1 Replies View Related

Hardware :: Getting A Radeon Xorg.conf.d/*.conf Stuff?

May 22, 2011

I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.

Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?

My xrandr command that I use to fix it all is:

xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of

I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.

View 1 Replies View Related

Debian Configuration :: Blank Screen On Boot. Graphics Card Not In Xorg.conf?

Jul 10, 2010

I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"

View 12 Replies View Related

Debian Multimedia :: X -configure Segfaults - Sid - Cannot Create Xorg.conf To Get A Correct Resolution

May 13, 2010

I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.

View 6 Replies View Related

Fedora Installation :: Import An X11 Xorg.conf File From Debian To Fedora And Have It Work?

Feb 26, 2009

Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.

View 2 Replies View Related

Slackware :: No More Xorg.conf?

Jun 2, 2010

Sorry if this was well covered here when most up-to-date Slackers moved to 13.0, but I have just jumped from 12.1 to 13.1. Generally very happy that I do not have to think about xorg.conf as I always found the structure of this conf file a tad confusing. However if I do need to (for example) change my video driver (I might for example want to try the nvidia driver from NVIDIA) or configure my touchpad - how do I do this ?

I understand that xorg.conf can still be created. If I do so, do I have to put all the stuff in that used to be there or can I just add the stuff I need to make the changes I am looking for?

View 4 Replies View Related

Ubuntu :: Where Is The Xorg.conf On 10.04

Aug 18, 2010

i i use ubuntu 10.04 and i buy a mouse, and i cant install it. i read on forum i need to put :

Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection

[code].....

wireless via Bluetooth � 3-button laser mouse with scroll wheel � resolution 1600dpi, adjustable on 800dpi � range up to 10m � computer with Bluetooth or dongle required � 2x AA batteries required

View 14 Replies View Related

Debian Configuration :: Configure Touchpad - Error "gsynaptics Couldnt Initialize You Have To Set 'shmconfig' 'true' In Xorg.conf Or Xf86config To Use Gsynaptics"

Jun 5, 2010

When i want to configure my touchpad on my dell inspiron 1525 with debian lenny then i got this message: gsynaptics couldnt initialize you have to set 'shmconfig' 'true' in xorg.conf or xf86config to use gsynaptics My touchpad is an alps and not a synaptics so far i can see. My xorg.conf is this: [URL]

View 13 Replies View Related

Fedora :: Cant Set Resolution In Xorg.conf?

Feb 3, 2010

While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0

[code]....

View 5 Replies View Related

Fedora :: How To Edit Xorg.conf

Sep 2, 2010

Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved