Hardware :: Making Megaraid_sas As A Module?
Mar 10, 2010
Im trying to recompile the 2.6.29.4 kernel to have the megaraid_sas driver built as a module instead of built-in to see if it solves a problem that is happening on a Dell Perc 6 contoller. Im having some trouble getting it to boot. It compiles fine as a module, but when the system boots, it freaks with a kernel panic and not being able to mount / .
It looks like it cant find the scsi disk controller since it complains about not being able to mount /.Ive seen this before where I had to rebuild initrdand preload the right modules Im compiling and installing the modules then rebuilding initrd with preload=megaraid_sas, but that does not help. Maybe there are more scsi drivers needed to preload?
View 1 Replies
ADVERTISEMENT
Dec 22, 2010
im doing a school assignement and i cant find any info about this anywhere. How do i make sure that a module is loaded into the kernel upon boot?
View 2 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Jan 28, 2010
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
View 1 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Jan 28, 2010
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
View 3 Replies
View Related
Jun 27, 2010
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
View 1 Replies
View Related
Mar 25, 2011
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
View 5 Replies
View Related
May 8, 2011
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
View 5 Replies
View Related
Jun 23, 2011
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
View 2 Replies
View Related
Aug 17, 2011
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
View 4 Replies
View Related
Jun 8, 2011
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
View 1 Replies
View Related
Feb 22, 2010
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies
View Related
May 1, 2011
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies
View Related
May 20, 2011
Just wondering if it is possible to make use of the Windows keys on keyboards - the ones with MS logo.In Vista - the action is to invoke the Start Menu.In Linux, there is no action when you press these keys - can this be changed?
View 10 Replies
View Related
Feb 14, 2010
I am trying to install a DB application on my desktop which runs on OpenSuse 11.2 64bit.
Unfortunately the application supports only SUSE Enterprise Linux V10 or V11 or Red Hat Enterprise Linux. Is there a way to add certain packages to 'simulate' an SEL Server? I found some packages name SEL something which I installed, however no changes here, I still can't install the DB.
View 9 Replies
View Related
Jan 18, 2010
I have a local mirror at my server. How I can create mirror on DVD's for people without network connections?
View 1 Replies
View Related
May 2, 2010
I want to make an iso for some friends [and maybe friends of friends] that aren't all that tech savvy, so I want to change a few things to the original Lucid iso. First, I want the option to install Lucid out of the boot menu [but the other options should ideally stay]. Second, I want to include the ubuntu-restricted-extras so they can immediately try it out and see that it also plays video/audio etc.
View 9 Replies
View Related
Sep 26, 2010
I'm running relatively overpowered server right now, that all it really does is host files and download movies/music that I might enjoy. I'm just seeking to expand it's capabilities to make life in the house more simple. The first thing I'd like to do is create a kind of automatic grocery list generator concept. Here's how I envision it working.
We create a list of recipes for meals we enjoy, specifically an ingredient list. From this list, we create bi-monthly meal lists; what do we want to have for the next two weeks. The server chews through the two lists, compiles a list of ingredients and how much of each we'd need.. and emails this off to our smart phones for us to refer to while shopping. What equipment do I have? I have a headless Ubuntu server running 10.04 and administered via a GUI and NX Client. Two blackberries (both 9700 Bolds) as portable smart clients that would need to at least receive the list, tho ability to add in would be great.
Home network is a mix of wired and wireless, so no issues there for connectivity. So why post this here? Because I'm at a loss as to the software/configuration part. Doing an automated email daemon is easy to send the list out. And a list of recipes or such is easy to get (dozens of cookbooks in the house, plus a small army of them available online).. the issue I'm having with is how to create/manage the database. I'm not familiar with SQL or any database programming at all. Is there something akin to this already in the repositories? Or is there someone who could point me in the right direction so I can do this?
View 2 Replies
View Related
May 29, 2011
Is it possible to disable the run/display/cancel dialog just for some selected files and keep it for others? I want to be able to just click on some files which would run them instantly yet still being asked what to do if I click on other files. Say, launching files a, b & c would make them execute but launching files d, e, f and all others would pop-up the dialog asking me what to do. So can it be done?
View 6 Replies
View Related
Sep 29, 2010
Making an awk script. If you tell me to read the documentation.. I know.. you're right.
By the way, here is some input
Code:
My awk program has to work in this way:
until the end of the document if the beginning of the line is "START11" while the beginning of the line is different form "END11" print the whole line (print the "END11" line too)
View 1 Replies
View Related
Jul 12, 2011
I want to make an rpm which when installed as an update causes another rpm to be removed. I'm fairly sure this is possible because I have seen LibreOffice rpms install as updates replacing OpenOffice rpms in the process without any interaction being required. However I'm unable to figure out how to do it, even after having looked at the spec file for such a LibreOffice rpm.
I have package gstreamer-0_10-ffmpeg installed. I have another package called multimedia installed. I've built a new version of multimedia which includes the gstreamer ffmpeg plugin so I don't need the gstreamer-0_10-ffmpeg package installed any more. I've tried using Provides and Obsolete in the spec file of the new multimedia package. E.g.
Code:
Provides: gstreamer-0_10-ffmpeg
Obsoletes: gstreamer-0_10-ffmpeg <= 0.10.10
(I've tried it with and without version numbers.) Whatever I put in the spec file, when I try and install the new multimedia package as an update zypper says
Code:
$ zypper up -y multimedia
Loading repository data...
Reading installed packages...
Resolving package dependencies...
Problem: multimedia-1.1-1.i586 obsoletes gstreamer-0_10-ffmpeg <= 0.10.10 provided by gstreamer-0_10-ffmpeg-0.10.10-0.i686
Solution 1: replacement of gstreamer-0_10-ffmpeg-0.10.10-0.i686 with multimedia-1.1-1.i586
Solution 2: do not ask to install a solvable providing multimedia > 1.0-2
Selecting an option manually is no good, I need the update to happen without user interaction.
View 3 Replies
View Related
Jul 12, 2011
I'm trying to make a huge installation of applications on linux, (Red Hat), but without internet, i mean, i will have to download rpm's one by one and install them, the problem is that i've tried and is terrible, it always shows conflicts within versions, dependencies of dependencies, etc etc...
Is there any kind of tip to get this working? any kind of command that shows me the real dependencies that should be installed (with the right versions, etc) without conflicts? I've tried the following:
Quote:
rpm -qR package
View 3 Replies
View Related
Nov 9, 2010
Do you know a way of making vim not to use colours?
View 1 Replies
View Related
Mar 3, 2011
I am using Ubuntu (9.04) and recently installed the Zed shell 'zsh'. I am planning to explore it a bit before setting it as my default shell. I did go through the configuration steps at the start when I first invoked 'zsh'.
In 'bash' I can use a series of customized search scripts which I keep in a subdirectory in my home directory say /home/thisuser/scripts.
This has been added to the $PATH and in 'bash' I can see the utilities contained in there and use them.
When I invoke 'zsh' from 'bash', 'zsh' can't see my '~/scripts' directory and its contents even though you can type
echo $PATH
and you'll see the :~/scripts: components in the path.
I know I'm doing something wrong..but what?
View 2 Replies
View Related
Dec 1, 2010
I am trying to understand how can I make a graph in C. So I wrote some program.
Code:
#include "declarations.h"
graph root = NULL;
int main()
{
[Code]....
View 6 Replies
View Related
Jan 12, 2011
to making the custumized ubuntu what steps doi need to follow 1)i have kernel 2.6.36 what next step do i have to do?
View 2 Replies
View Related
