Hardware :: Hp Psc 1110 Scanner Not Found?
Mar 6, 2010
I run Ubuntu Karmic (9.10) and have a hp psc 1110 connected by usb. The printer works fine (with hplip and cups). And sane-find-scanner answers:
Quote:
found USB scanner (vendor=0x03f0, product=0x3011) at libusb:005:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
However, scanimage -L reports "No scanners were identified. The strange thing is that the scanner used to function (with xsane as front-end) a few weeks ago. Somehow I broke this functionality, possibly when I installed drivers from HP to get better options for the printer part (e.g., switch color cartridges off). Any idea where I need to look to get it running again?
View 4 Replies
ADVERTISEMENT
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
Mar 3, 2010
Having spent hours and hours on this, I'm ready to give up on Ubuntu. Whenever I run Xsane or Vuescan, I get a message telling me there are no devices available. Op system is Hardy.HP J6480 is conected to network hub.Vuescan works fine under Windows 2000. Printing works fine from UbuntuI have repeatedly installed HPLIP.I have run hp-check and loaded all the dependencies it told me it couldn't find, reducing the number of errors from 9 t(mostly compile time) to 3.Hp-check finds the printer ok, but tells me no scanners were identified.The silly thing is that before I re-installed Ubuntu I managed, somehow, after a lot of work, to use Xsane.
View 1 Replies
View Related
Apr 20, 2010
I just got a new scanner HP Photosmart C4640 and tried to set it up on Ubuntu 8.10SANE has it as supported, but I can't scan.Printing works fine. when I run xsane I get
Code:
Failed to open device 'v4l:/dev/video0': Invalid argument.
Poking around I found ScanningHowTo page. But I was unable to find the .fw, .usb, or a PPD
[code]....
View 3 Replies
View Related
Nov 30, 2010
I've got an HP LaserJet 3300 all-in-one that I can't seem to get working as a scanner.Printing and copying work fine, but not the scanner function. I'm running kubuntu 10.04, but my guess is that kubuntu vs. ubuntu doesn't matter here.I'm using an IEEE-to-usb cable to connect the device to my box. When I first plug it in, cups recognizes it, and I see a popup in the lower right of my screen entitled "printer applet" and saying configuring new printer". Then it says "hp-laserjet-3300-3310-3320 is ready for printing". After this, printing works fine.But no scanning. lsusb doesn't see the device:
[brett@grox:~]$ lsusb
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 4 Replies
View Related
May 18, 2011
I'm trying to set up my EPSON Stylus TX120 multifunction, and i've successfully installed the printer, and for the scanner i followd the instructions from avasys page: installed iscan-data and iscan (core) compiling them from source with no problems using --prefix=/usr in both packages, but when i run sane-find-scanner no scanner is found. If i try using scanimage -L only my webcam is listed, so, is there anything else i have to do in order to get my scanner detected in slack 13.37? I've run both commands as root, by the way.
View 6 Replies
View Related
Aug 1, 2009
Since installing F11, my Canon LIDE 50 scanner refuses to work. xsane 0.996 produces an error message: Failed to start scanner: Error during device I/O.
sane-find-scanner says it is there: found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841?) at libusb:001:006 But scanimage -L claims: No scanners were identified.except once when it admitted: device `genesys:libusb:001:006' is a Canon LiDE 35/40/50 flatbed scanner
I reluctantly tested the scanner on a Windoze machine and it works perfectly. And it worked perfectly under F10.
View 9 Replies
View Related
Feb 8, 2011
Alright I am about to throw this western digital device out the door and drive over it. The back story is that I have done a Debian net install on an older tower PC laying around the office. I am going to use this tower as an FTP server to store and backup several other servers we have have. We also have an older Western Digital (WD) my book 1110 sitting here. I was planning on using the external storage as the repository as it is 1TB raided. Seems like a good plan, plug the device into the tower and instantly two new drives show up "External CD-ROM" drive: "WD Smartware" and then "My Book". When I click on the cd rom drive I get the .pdfs and executables that are stored on the device. However when I click on the "My Book" drive I get the message "Invalid mount option when attempting to mount the volume 'My Book'.".
View 7 Replies
View Related
Jun 27, 2010
I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.
View 1 Replies
View Related
Dec 1, 2010
I performed an install using the 5.0.6 amd64 netinst cd on a dual opteron server with an Areca ARC-1110 4-port SATA hardware RAID card. I have 2 250GB drives set up as RAID 1. The debian install saw it as only one drive, just as it should. Install went smoothly, but on reboot, the system would not load.
I did some research and tried a couple of things with no luck. Like adding a delay in the grub command. It jus sits at loading system for a while then times out and loads busy box. Just to check things out, I booted into an Ubuntu live-cd and mounted the volume. The file system is there and all of the necessary files. How to use one of these cards successfully?
View 2 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Sep 7, 2010
I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
View 9 Replies
View Related
Oct 22, 2010
my scanner used to work in lenny, now im using squeeze fresh install.
i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.
normal user and sudo see the scanner with
$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....
i know my user is in group lp and scanner root cant use the scannner either.
View 1 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Mar 29, 2010
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
View 3 Replies
View Related
Jan 24, 2010
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies
View Related
Oct 28, 2010
I've been using a Nikon Coolscan 4000ED on Ubuntu for a couple of years via Vuescan with no problems at all.
The other day I upgraded to 10.10 and Vuescan can no longer see the scanner. So I tried X-Sane and Simplescan and they both say there is no scanner even though it's connected and switched on. So for some reason, Ubuntu 10.10 cannot see the scanner or perhaps the IEEE connection.
View 2 Replies
View Related
Oct 8, 2009
I have a small home network. One of the machines has an Epson scanner attached to it and I have been using the Linux version of vuescan for scanning with it.would like to run vuescan ona different machine to scan without moving the scanner.
View 3 Replies
View Related
May 26, 2010
I installed Fedora 13 64 bit yesterday and so far so good. Except that it recognized my hp2100 printer scanner but it didn't work until I set up CUPS. I installed HPLIP and it doesn't see the printer even though it works. Now I would like to get the scanner to work, but simple scan doesn't see it. How do I get it to work?
View 2 Replies
View Related
Aug 1, 2010
I have a mac, but I have a lot of files on my Ubuntu machine, that i'd like to transfer over, but I would like to make sure they are clean.
View 2 Replies
View Related
May 7, 2011
what scanner to buy to work out of the box with Ubuntu 10.04 LTS
View 7 Replies
View Related
Mar 5, 2010
I'm having problems getting my Canon MP-210 printer/scanner recognized as a scanner device in Slackware 13.0.CUPS setup was a breeze - in less than two seconds it was installed and within 10 more seconds it was printing a test page.Its URI is here, according to CUPS:
usb://Canon/MP210%20series (Printing works flawlessly).My non-privileged user account is a member of the 'wheel', 'scanner', and 'plugdev' groups in /etc/group (among the others recommended by the adduser script. I've tried running xsane as root (Still no devices found) with no success, and the CLI 'scanimage -L' doesn't produce anything either.They just report that there is no configured device.
I've run 'sane-find-scanner' and it reports the following:
Code:
found USB scanner (vendor=0x04a9 [Canon], product=0x1721 [MP210 series]) at libusb:001:003 Rebooting and unplugging/plugging in the scanner produces no positive results. /etc/sane.d/dll.conf has the following canon lines in it:
Code:
canon
canon630u
#canon_pp
I believe the appropriate entry is the canon630u.
/etc/sane.d/canon630u.conf contains the following:
Code:
# Options for the canonusb backend
# Autodetect the Canon CanoScan FB630u
usb 0x04a9 0x2204
[code]....
View 15 Replies
View Related
Aug 21, 2010
I have a laptop which I use for school and I have a scanner/printer that used to be near and I used to scan things and store them in the laptop via the scanner/printer's USB cable. In an attempt to make space to study more comfortably on my desk, I moved the scanner/printer near my gaming computer (on a desk that I don't use). What I want is to scan via my desktop (=gaming computer) and have it directly be stored in my laptop via a symlink and a LAN network. My desktop runs Squeeze and my laptop runs Lenny. One of my weakest points in computing is networks so I would very much appreciate it if someone could guide me through this process.
My laptop has an ethernet port and a wireless card whereas my desktop has a built-in ethernet port, a wireless PCI card as well as another ethernet port (PCI) which I am planning to install soon. For my laptop, I want wireless internet, and the wired connection to be to the desktop for the scanner/printer's purposes.As for the desktop, I want to connect to my internet via a wired ethernet connection and use my extra PCI ethernet port for the scanner/printer situation
View 4 Replies
View Related
Aug 20, 2010
Having successfully installed SANE and gotten a scan from my ancient Mustek scanner, I thought I had it setup. But that was running in the root terminal window. When I try to run xscanimage from GIMP in my normal user account it doesn't start up. Running xscanimage in a normal terminal it says it can't see any scanners. Yes, I added my user account to the scanner group. What else needs to be done to let a normal non-root user access the scanner?
View 4 Replies
View Related
Mar 10, 2015
Very easy to get the printer working via wifi on this printer/scanner under Wheezy. But oh the scanner! XSane doesn't see it via wifi- worked ok on USB. Problem could be with Xsane or CUPS? URL....One shows various useful tips under one roof: I can now access the scanner using xsane on the command line; but xsane cannot find the scanner when launched normally]
View 0 Replies
View Related
Mar 16, 2010
I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies
View Related
