Fedora :: Upgrading FC12 To FC13 Using Yum
Mar 21, 2011
Following this from the wiki: It states Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update. How do you ensure that its the last package to update?
First install the new fedora 13 gpg key. You may wish to verify this package against [URL] and the fedora ssl certificate.
rpm --import [URL]
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=13 distro-sync
- Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV.
- Intel video no longer works without Kernel Mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- nVidia video no longer works without kernel mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.
View 5 Replies
ADVERTISEMENT
Aug 10, 2010
Can I migrate from fc12 to fc13 or do I have to do a full re-install? If I can migrate, can you point me to the instructions/working paper/etc.?
View 6 Replies
View Related
Oct 6, 2010
Before buying an HP DL380 G5 (Intel Xeon 2 or 4 core) I need to be sure. Does anybody have installed succesfully FC12 or FC13 on this hardware? I could not find an HCL for FC12 or FC13.
View 3 Replies
View Related
May 26, 2010
Took an FC12 system to FC13 via 'preupgrade'There was a REALLY old version of gimp-print-cups in RPM, and the installer announced "a fatal error occurred". However, everything else seemed to download properly and I allowed the upgrader to reboot the system.
a) grub boots the kernel, then the kernel can't find root and panics. It does this because it can't root file system with root=UUID= kernel option. If I manually tweek the grub line to use root=/dev/sdx, kernel finds its root and boots up to the next problem.
b) GUI environment not launched. Init scripts die on "error loading modules.dep". Sure enough - one is not there. Ran "depmod" to generate it ,and rebooted. System reboots into GUI, where I login to find the next problem.
c) Evolution won't start. Reason turns out the evolution-data-server from FC12 is still present. Did a check on just how many other FC12 RPM's are present: 1100. Yeah - over 1000. About 850 of the FC12 RPM's also had FC13 replacements installed. Did an "rpm -e" on these. Also had to do some remove action on mkinitrd, nash, plymouth-scripts-0.8.0, and parted-1.9.0 as there are replacements for these utilities under different package names. That cleaned up the system some, to present me with the next problem.
d) yum package repository still linked into FC12. Removed fedora-release-12-2.noarch and then I could "yum install" evolution and a few other packages properly.
I've done one other FC12->FC13 upgrade today, and that went flawlessly. So, I think in general the upgrade works fine. It just looks like if preupgrade finds anything amiss, it doesn't take care of a lot of things and generally leaves you with an unbootable mess to clean up.
View 6 Replies
View Related
Dec 29, 2010
From at leat FC12 to FC14, I notice that the form we have to fill in to write a filename (for example) don't give anymore the choice of the file which already exist in the current directory.I explain :Use gimp or geditCreate a simple file : example.txt or xample.jpgnd save this fileclose this filecreate now a new filetry to save it under the name: exand in FC9, the system added one line to propose you example.txt because example match with ex you just typedin FC14, this proposal doesn't exist anymore.How to setup it again ?I am working with gnome but the problem is the same with kde
View 2 Replies
View Related
May 13, 2010
I'd like to reproduce the way I got to f12 from f11, but obviously to f13 basically I started out on the f11 rawhide repos, then as f12 got released a yum update updated my fedora-release and then hey presto I was automatically upgraded to f12 final release if I now turn on my rawhide repos, as f13 is nearing completion, will I be updated to the latest f13 release (RC3 I believe) and then as f13 gets released my fedora-release will be updated and i will then be upgraded to f13 final as happened before?I don't want to download a whole dvd iso and then upgrade when f13 is final, I'd like to do a gradual transition ie..
f12 -> f13 RC3 via rawhide
f13 RC3 -> f13 Final via yum update
View 2 Replies
View Related
Jun 16, 2010
After updating to 2.6.32.14-127.fc12 kernel my computer is slow.
View 4 Replies
View Related
Dec 29, 2009
I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
View 6 Replies
View Related
Feb 17, 2010
I've been trying to upgrade my installation for some time now and just can't quite get it right. I would upgrade from the DVD but the installer hangs when it says "Looking for installation images on CD device /dev/sr0". However, that's not really my question. I've resorted to the upgrade instructions as found at [URL]. If I don't use the '--skip-broken' option it complains about the following:
abrt-gui-0.0.11-1.fc12.x86_64 from fedora
abrt-libs-1.0.6-1.fc12.x86_64 from updates
samba-3.4.5-55.fc12.x86_64 from updates
samba-client-3.4.5-55.fc12.x86_64 from updates
samba-common-3.4.5-55.fc12.x86_64 from updates
samba-winbind-3.4.5-55.fc12.x86_64 from updates
samba-winbind-clients-3.4.5-55.fc12.x86_64 from updates
If I use the skip broken option, it then complains about:
Transaction Check Error:
file /usr/share/locale/de/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/man/man8/cryptsetup.8.gz from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
I can't seem to remedy this problem. There were other conflicts but I just removed those packages. When I attempt to remove 'cryptsetup-luks' it then tells me it's going to remove something like 200 others which did not sound like a good idea.
View 14 Replies
View Related
Feb 8, 2010
I only began using Linux with the release of FC8. I've upgraded into every new version (upgrade, no clean installs), after the new versions had been out a while. I struggle with command lines, updates, cups and other very cool tools that are only difficult because they have so many options. I'm Windows guy at work, a system admin and db administrator, plus the company expert on Excel. But, all in all, I hate Windows, and I'm loving Fedora, even if I struggle.
This last upgrade really kicked me in the pants. The first thing I noticed was all of my software sources were gone. I did some research around the forum and tried a few things, but it's still not working. Unfortunately, I may have uninstalled Yum in the process, but not rpm. I've tried to re-install the yum packages, but still no luck.
This morning before leaving for work I noticed that a boot log indicated that cups had failed. I went in to restart the service (through gui) and it said it was running. So I stopped the service and re-started. I tried to access port 631 through Firefox and it wouldn't open. I need to check the firewall to see if it's an open port, but beyond that I don't know.
Now I'm wondering if I should just do a clean install. I haven't done this, mainly because I didn't want to hassle with setting up my printer again (although, it's a Brother and they have the drivers and good instructions), and I didn't want to lose any emails that I've received via Thunderbird. The printer is really a non-issue now, as I'll have to set it up anyway. I have a backup of the /usr folder and all the documents. Question is, if I restore the Thunderbird folder after a clean install, would it bring back my email?
View 3 Replies
View Related
Jun 8, 2010
Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
View 4 Replies
View Related
Apr 18, 2010
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies
View Related
Oct 21, 2010
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Jun 6, 2010
I just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
View 6 Replies
View Related
Sep 30, 2010
I have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
View 5 Replies
View Related
Mar 10, 2011
I am trying to setup VNC server on FC13 box. i am not able to do proper configuration. Can anone point to me a good link which is working. I did many configurations. but no success yet. I have an issue especially with xstartup script. I am running VNC server on Linux and RealVNC viewer on Win Vista OS.When i try to connect to VNC server from RealVNC viewer from Win Vista. It gives error like "unable to connect to host: Connection timed out (10060)"
View 4 Replies
View Related
May 5, 2011
I have FC 13 with both KDE and Gnome loaded. Over the last couple of years of using linux. I've found Gnome better suitable for my needs than KDE and now I'm stuck!
View 6 Replies
View Related
Nov 4, 2010
I did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:
Code: default=0
timeout=0
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
View 2 Replies
View Related
Sep 22, 2010
got my upgraded fedora 14 partition to boot, but I find out that I had to reinstall my nvidia driver, no big deal. seemed to go ok, but now when I go applications->system tools -> terminal I get the "starting terminal" thing on the bar, and then nothing. Can't figure out whats up.
View 4 Replies
View Related
May 26, 2010
I have just updated to FC 13 (64 bit), and there seems to be a problem with Jabber in Kopete. I use this to connect to the google talk servers. In FC 12 this was not a problem. However, now I recieve a message "Cannot load the Jabber protocol plugin." when trying to add a Jabber account in kopete. This happens on two separate recently upgraded machines.
I suspect the kdenetwork package shipped with FC 13 is broken in this respect.
EDIT: Updating to the kde packages from the kde-testing repository fixes this, so it looks like the package is indeed broken.
View 2 Replies
View Related
May 28, 2010
I have a fresh install of FC13, nVidia 9800 GTX+ video card but no 3D.
View 4 Replies
View Related
May 31, 2010
I have a mivvy l310 netbook. Before I had FC12 on it and I couldn't upgrade (not enough space on /boot, tried all commands and it didn't worked) to FC13. So I said I would do a fresh install for FC13. I used live CD FC 13 iso to make the usb drive (16gb) bootable.It boots, all goes ok, untill the installation is in progress of copying files to my HDD (at this point my HDD is empty, since it was formated). At about half of the progress bar of copying the installation files to HDD it stops with: ""There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media."" I can't go further and install it. I tried making the usb drive on FC13 (finished successfully, on another laptop with liveusb creator) and also on SUSE and it behaves the same.
I also tried second method (described in a thread around here, it worked for me in the past for FC11), by just making the usb drive bootable, using commands in the terminal (here my FC13 kernel, on another laptop crashes, for some commands) and when I try to install I get only: "missing operating system, sleeping forever". For this method, it does not boot at all, so I guess the usb drive is not properly setup. I don't know what else to try. I tried normal dvd iso, live cd, tried making the usb using commands, using live cd, with commands on suse, on FC13 etc...
LE: I found in messages log that I have: zlib_inflate error fc13
LE LE: what's more weird is that I downloaded the same live image of FC13 and burned it on a CD and managed to install it on my other laptop and it worked.
Later update: I tried now with the DVD iso for FC13 and now I get: operating system not found
View 10 Replies
View Related
Jun 9, 2010
I have a GeForce 7100 GS Nvidia card (that is, a 2 year old card: not old, not new), that I always used with the kmod-nvidia kernel modules without a problem.But FC13 installs nouveau, drivers for nvidia cards. I tried those, and glx is too slow. Foobilliard and gl-117 games are VERY slow, glxgears shows 400 fps. Is there a xorg.conf trick?
View 3 Replies
View Related
Jun 30, 2010
I installed pidgin 2.6.6 on fedora 13 and setup as following:
protocol: yahoo
pager server : scsa.msg.yahoo.com
port: 5050
file transfer server: filetransfer.msg.yahoo.com
file transfer port: 80
[Code].....
View 3 Replies
View Related
Jul 2, 2010
Post upgrade from 12-13 my Banshee installation is refusing to play CDs. In fact it doesn't even recognise there is one in the drive.
The icon appears on the desktop ok when I put on in and I get asked what I want to use to open it so it seems the system itself recognises a CD but for some reason Banshee doesn't.
I got an error about Banshee needing CD Audio Plugin, which I told Banshee to try and find but it failed. No idea where to go from here.
Worked it back to gstreamer-plugins-bad / ugly packages were wanted. So removed with yum then allowed banshee to try finding them.
It got as far as asking for root auth which I gave it, it them fell over in a heap.
Now it seems banhsee is no longer on my system and has some dependency issues....
[root@bigfoot log]# yum install banshee
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]....
View 6 Replies
View Related
Aug 15, 2010
I am using FC13 (2.6.33.6-147.2.4.fc13.x86_64) with a ASUS MB/Athlon II X4 CPU for the hardware.Recently my workstation keeps freezing, the power is still on, but the screen goes black,I cannot ping it from other computers on the network, the only thing to do is to press the power switch.
Questions:
* I cannot find any messages in the log, no kernel panic message on the screen, I even installed kdump but no kernel dump is created,does it means it can only be a hardware problem ? I have a vendor kernel module for my NIC and my video card could they cause that kind of problem ?
* I am logging the CPU temp every minutes and I notice that on a few occasion the CPU is close to 70C when the workstation freeze,is 70C too hot for the CPU, is that what CPU do when they reach a temp to high for them to operates ?
View 4 Replies
View Related
Aug 16, 2010
I just installed FC13 on my laptop. I cannot upgrade from FF 3.6.7 to 3.6.8.
View 3 Replies
View Related
Sep 2, 2010
I upgraded from FC11 to FC13 last night. The desktop has not been stable since. It will run for anything from 5 to 30 minutes before it locks up. Interesting, if I am already ssh'd in, I can perform commands, but a new SSH will hang, and if I try to SU to root in an already logged in ssh, it hangs.
However, I did finally manage to get the messages that were logged to /var/log/messages at the time of the desktop freeze.
Here are the messages. The first 3 about high speed usb may or may not be relevant. The freeze appeared to happen around the 4th message in the log below.
Code:
Sep 2 13:16:57 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:26:38 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:31:20 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:38:03 starbug kernel: INFO: task jbd2/dm-0-8:558 blocked for more than 120 seconds.
[Code].....
View 1 Replies
View Related
Sep 20, 2010
Recently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.
View 1 Replies
View Related