I have debian linux system on ticketing tool i am getting error 'Service Name'='diskarray' 'Value'='2'
the structure of file system is as per below. /dev/cciss/c0d0p11
not able to understand the issue with storage and unable to find out the exact error if someone know the commands and details about the file system structure let us know.
I am trying to solve problem with software which needs to have access to network card I suppose. Installation run without any problems but when I am launch software I get such message as normal user:
Cannot register service:
RPC: Authentication error; why = Client credential too weak.
When I launch program as root I get this:
WARNING: localhost appears to have the loopback address 127.0.0.2 as IP address
This may imply that processes on arlin may not be able to connect to non-local processes but program starting with success at least. What I should do to run program as normal user?
I recently installed 10.04 with a realtime kernel and after running some upgrades I can now no longer log in. It was previously set to automatically log in, now I get to the log in screen, click on Automatic Login and it says: Unable to open session. If I click my username and then enter my password it says the same thing. I can ctl-alt-F1 to the CLI and if I then enter username and password I get:
Code:
Last Login: Sat Jul 3 12:24:51 BST 2010 on tty1
Linux james-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux
Ubuntu 10.04 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com
0 packages can be updated
0 updates are security updates
[Code]...
On restarting networking service, i am getting the following error,
Code:
karthick@karthick:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces.. ssh stop/waiting
ssh start/running, process 5427
start: Job failed to start
[ OK ]
I use red hat linux. When I start up network service. I get below error in eth2
root@vls etc]# service network restart
Shutting down interface eth2: [OK]
Shutting down loopback interface: [OK]
Bringing up loopback interface: [OK]
Bringing up interface eth2: RTNETLINK answers: File exists
Error adding address 10.1.1.82 for eth2. [OK]
I paste the ifcfg-eth2 in here
[root@vls network-scripts]# cat ifcfg-eth2
# Intel Corporation 82572EI Gigabit Ethernet Controller (Copper)
DEVICE=eth2
BOOTPROTO=none
BROADCAST=10.1.255.255
HWADDR=00:80:82:8F:B4:A2
IPADDR=10.1.1.82
NETMASK=255.255.0.0
NETWORK=10.1.0.0
ONBOOT=yes
GATEWAY=10.1.1.249
TYPE=Ethernet
USERCTL=yes
IPV6INIT=no
PEERDNS=yes
So, what is the problem of error adding address?
WHEN I START /openvpn /etc/openvpn/server.conf im getting the following error i had installed the configuration by following link [url]
I had pasted i error log below:
I followed the below link for installing disk space alert in opennms its not automatically alertin disk space so i followed the procedure below i getting such a error can somebody point out where im making mistake in installation
[url]
Im getting mail alert for allnode down events i opennms..but not gettting mail regarding disk &memory down events:
Stopping OpenNMS: Trying to stop OpenNMS but it's already stopped.
[ OK ]
Starting OpenNMS: Started OpenNMS, but it stopped running: for details see /opt/opennms/logs/daemon/output.log
I am using fedora9 server I installed & configured httpd ,mysqld & heartbeat service its well and running but every 10 to 15 days httpd service is stoped when I tried to start the service
I am getting this below error:
#sudo /sbin/service httpd start
Starting httpd: [Mon May 09 09:03:07 2011] [crit] (17)File exists: Failed to create shared memory segment for backend 'XXGLOBAL'
I checked httpd pid
#ps -ef |grep httpd
526 7553 7194 0 09:06 pts/0 00:00:00 grep httpd
I googled and run below the commands:
#ipcs -s | grep apache
I didn't get any out put:
#ipcs -s | grep apacheipcs -s | grep apache | perl -e 'while () { @a=split(/s+/); print `ipcrm sem $a[1]`}'
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid]
[-Q msgkey] [-M shmkey] [-S semkey] ... ]
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid] .....
I got the out put below like I wait 5 to 10 min but the proses will going on I killed the process I tried to start the service but I got same error. When I restarted my O/S the problem is rectified but every 10 to 15 days same problem I am getting.
I checked http error_log file:
# tail -f /var/log/httpd/error_log
[Mon May 09 09:46:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:48:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:50:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:52:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:54:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
I am getting the error Cannot Enable Service SUSEFirewall2_setup when I try to set up the firewall in Yast.
11.4 x86-64
KDE 4.6.00
whenever i try to update or install a new software this problem shows up Resolving ftp.3drealms.com... failed: Name or service not known. wget: unable to resolve host address `ftp.3drealms.com' --2010-05-23 12:20:14-- ftp://ftp.3drealms.com/pub/share/1rott13.zip => `/usr/share/games/rott/1rott13.zip'
View 3 Replies View RelatedI am trying to configure rsh on..but it comes up with a error message error reading information on service -rsh...
when i query rpm -q rsh..It displays rsh package..
I am installing Nagios Monitoring tool in RHEL5 and I got stuck at one point. The details are as follows:
Nagios version:3.0.1
At the end of installation when I try to execute the command
#chkconfig --add nagios
Its displaying "error reading information on service nagios : no such file or directory".
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
View 1 Replies View RelatedI have installed package tigervnc-1.0.0-3.fc12.i686, but when I am trying to start it: service vncserver start it comes back with following message: vncserver: unrecognized service.
View 1 Replies View Relatedwhile starting xfs service on centos 5.3 shows error as starting xfs :mkdir:cannot create directory "/tmp/.font-unix':too many links
View 6 Replies View RelatedWe have one FTP server. Users are uploding files to the perticular directory remotely. but today some users got below error message.
421 Service not available, remote server has closed connection.
(vsftpd service is up and running) What are the possible causes for this error and from where I should start troubleshooting?
I am running Server 10. I have a requirement to perform an action before the MySQL service starts, and perform another action after MySQL service stops.
I found the init script for MySQL under /etc/init/mysql.conf. I added my thing to the pre-start script there and works fine.
I am having trouble finding the script that stops the server so I can modify.
In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
Tearing my hair out on this one a little bit, having problems sending message from web based PHP form to user inbox.I keep getting: Undelivered Mail Returned to Sender<me@mydomain.co.uk>: Host or domain name not found. Name service error for name=mydomain.co.uk type=A: Host not found.Running these commands:
$ hostname = mydomain.co.uk
$ hostname -f = mydomain.co.uk
$ postconf -n =
[code]....
will the command service httpd restart the apache service if i enable httpsd service in graphical mode
View 12 Replies View RelatedI have an error with the Firewall in F12. The firewall start in gui, the 1st window: Firewall Configuration startup come but when I close it the following error occur:
org.fedoraproject.slip.dbus.service.PolKit.NotAuth orizedException.org.fedoraproject.config.firewall. auth:
I can do: Redo or Quit ( redo will pop out the same error).
hi, first i'd like to say that i'm totally new to linux, i was allways using windows.
as i was allways unable to install a good and stable ssh-server on windows, i thought it is time to change to linux. i was able to set up and configure a ssh-server on debian but found out, that fedora 15 looks more userfriendly in first place for me. but now i unfortunately experience problems..
the ssh server was already installed, i changed the service setting to that it starts automatically but after i succesfully connected to the LAN, i cannot access the shh via putty for instance. when i type "service sshd status" it says beside other things: active (running). but when i look at the /var/log/messages, it says those two lines:
sshd.service: main process exited, code=exited, status=255
Unit sshd.service entered failed state.
i searched on google without success, the only thing i found was that someone had the same problem with a bad sshd_config file, but i'm pretty sure that everything is alright with my config-file (i checked it several times).
beside this i cant login on the gui, after the firefox update (??) it always says: a problem has occured and the system can't recover bla bla... so i can only use fedora right now commandline-based.. but with this problem i will deal later on...
i recently install openoffice in fedora 12 and error occured the error is : the action could not be completed because the name org.freedesktop.packagekit was not provided by any .service files. what is link to download latest openoffice for my fedora 12,?my laptop model is asus k50in.
View 1 Replies View RelatedI have a program to start called "pace_old".
In the command line I type it's name and get this:
What should I do ?
Distro is SuSe 11.1. Btw: I do not get this message on Suse 9.0. Pace_old runs properly there.
i can smb in centos 5 and i run service smb restart, it shows :smb: unrecognized service..... i run rpm -qa |grep samba,it shows
samba-common-3.0.33-3.7.el5
samba-client-3.0.33-3.7.el5
.....
I was trying to copy a few files to my phone via bluetooth when the file transfer window popped up with the progress bar stating "Connecting" and an error: the name org.openbox.client was not provided by any .service files..
I am using: openSUSE 11.3
Gnome 2.32, Kernel 2.6.38,
obex-data-server 0.4.5-12.2,
[code]....
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
View 1 Replies View RelatedI need to start a service before network service How to?
View 1 Replies View RelatedWhen I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:
"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"
i have squid running in my network the problem i am facing is that once a week the squid service is dead, i checked the log files bu could not figure out what the problem is it gives me the error squid dead but pid file exist squid error no running copy i have written a script that just moves the compressed log files from the /var/log/squid files to /media/usbdisk the script is as follows i suspect that this problem arises because of the script coz the script runs every week and the next day i get this problem
[Code]...