Software :: HTTPD Service Start Up With Error

May 9, 2011

I am using fedora9 server I installed & configured httpd ,mysqld & heartbeat service its well and running but every 10 to 15 days httpd service is stoped when I tried to start the service

I am getting this below error:
#sudo /sbin/service httpd start
Starting httpd: [Mon May 09 09:03:07 2011] [crit] (17)File exists: Failed to create shared memory segment for backend 'XXGLOBAL'
I checked httpd pid
#ps -ef |grep httpd
526 7553 7194 0 09:06 pts/0 00:00:00 grep httpd

I googled and run below the commands:
#ipcs -s | grep apache
I didn't get any out put:
#ipcs -s | grep apacheipcs -s | grep apache | perl -e 'while () { @a=split(/s+/); print `ipcrm sem $a[1]`}'
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid]
[-Q msgkey] [-M shmkey] [-S semkey] ... ]
deprecated usage: ipcrm {shm | msg | sem} id ...
usage: ipcrm [ [-q msqid] [-m shmid] [-s semid] .....

I got the out put below like I wait 5 to 10 min but the proses will going on I killed the process I tried to start the service but I got same error. When I restarted my O/S the problem is rectified but every 10 to 15 days same problem I am getting.

I checked http error_log file:
# tail -f /var/log/httpd/error_log
[Mon May 09 09:46:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:48:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:50:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:52:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed
[Mon May 09 09:54:01 2011] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock
Configuration Failed

View 6 Replies


ADVERTISEMENT

Fedora Installation :: Start The Service Of Httpd Error Message Displayed: Starting Httpd: (98)Address Already In Use ?

Sep 19, 2010

I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80

View 1 Replies View Related

General :: Unable To Start HTTPD Service - Getting Error

Jul 22, 2011

I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.

View 1 Replies View Related

General :: HTTPD Service Fail To Start In RHEL6

Jun 7, 2011

I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.

View 1 Replies View Related

Fedora Servers :: HTTPD Service Does Not Start - Could Not Bind To Address

Nov 17, 2010

I have one problem regarding my web server. When I am try to restart my httpd service it shows...

[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#

View 2 Replies View Related

General :: Whenever Start Httpd Service 8 Apache Processes Get Triggered?

Apr 29, 2010

I m using apache http server for hosting a website.

Whenever i start httpd service 8 apache processes get triggered . Is it normal? Is apache is default application server like IIS in windows?

Quote:
top - 15:49:15 up 8 days, 22:53, 3 users, load average: 0.73, 0.77, 0.91
Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.8% us, 8.0% sy, 0.0% ni, 91.2% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2064720k total, 2017072k used, 47648k free, 204452k buffers

[Code]....

View 3 Replies View Related

General :: Will Command Service Httpd Restart Apache Service?

Dec 25, 2009

will the command service httpd restart the apache service if i enable httpsd service in graphical mode

View 12 Replies View Related

Fedora :: Httpd Won't Start Failed Error

Nov 18, 2010

I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.

View 11 Replies View Related

Server :: Error "no Listening Sockets Available, Shutting Down Unable To Open Logs [FAILED]" When Restart The Service Httpd

Apr 2, 2011

[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80

no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd

View 9 Replies View Related

General :: Centos 5.3 - Unable To Start Sshd Service - Shows Error

Oct 5, 2010

In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option

Same error while starting the httpd service.

View 17 Replies View Related

Fedora :: HTTPD Enabled - This Service Is Dead

Mar 26, 2010

I have opened up the Service Configuration window that shows all the services and their status. My httpd says that it is enabled, but also that "this service is dead" and there is a orangish triangle. I can run phpMyAdmin on my server, but I can't run it from any other PC on my network.

View 13 Replies View Related

Server :: Cannot Restart Httpd Service Port 80 Already In Use?

Jan 16, 2010

I neded to make some changes to the httpd.conf file. Afterwards I tried restarting,but it won't restart.It's saying port 80 is already in use. after checking via lsof -i :80 I get this result:

[Code]...

View 1 Replies View Related

Server :: HTTPD Service Get Dead Any Time

May 2, 2011

My mail server is getting problem since 3 days. It automatically get hang and httpd service get dead any time. How I can check what is effecting server, load, network traffic etc...

View 13 Replies View Related

Software :: Run Two Httpd Service On Same Machine Using Iptables?

Sep 21, 2010

I have task to do configure a two httpd service in a same linux machine using iptables.

For example: Run primary httpd instance on 80 and 443 port if primary instance is down switch to second instance running on 8080 and 4443 this can be achieved using iptables.

View 5 Replies View Related

CentOS 5 Networking :: Can't Install Httpd Service

Mar 11, 2009

Well, i can not install httpd service, when i execute yum -y install httpd i get this message

Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=i386&repo=os error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again

View 4 Replies View Related

CentOS 5 :: Install Httpd As A Service With -D SSL Flag?

Mar 12, 2010

I have reviewed the HowTo wiki on Setting up an SSL secured Webserver with CentOS [URL], and have successfully set up my server.

We are using the conditional <IfDefine SSL> tags around the <VirtualHost _default_:443> section. I wanted to do this because we are deploying a standard <VirtualHost> section that is appended to the httpd.conf file for several Apache versions on several OS's, and this makes maintenance much easier. Sometimes the server will be configured with SSL support, and sometimes not, depending on certain functions of our application that the end user will require and determine. Our application then determines which mode the server should be run in depending on these functions, what OS is being run, what version of Apache is being run, etc, and starts the httpd server in the appropriate mode. For CentOS 5 with Apache 2.2, if the application indicates SSL is required (and we expect the server to be configured appropriately), then we do the following:

/usr/sbin/apachectl -D SSL -k start

View 1 Replies View Related

Fedora Servers :: Service Httpd Restart - Broken In F11?

Jul 5, 2009

Has anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.

View 10 Replies View Related

Fedora :: HTTPD Service Entered Failed State

Jun 1, 2011

F15 x86_64
I can start this from the command line and it shows no errors.
httpd -t --- syntax ok.
no entry in the httpd error logs.
chkconfig reports it as on.
service --status-all shows this --

httpd.service - LSB: start and stop Apache HTTP Server
Loaded: loaded (/etc/rc.d/init.d/httpd)
Active: failed since Wed, 01 Jun 2011 07:06:18 +0100; 58min ago
Process: 1152 ExecStart=/etc/rc.d/init.d/httpd start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/httpd.service

After a reinstall I finally caught this in /var/log/messages
systemd[1]: Unit httpd.service entered failed state
The httpd.service file does not exist on the system. Where can I get a copy?

View 14 Replies View Related

CentOS 5 Server :: Possible To Run Directory Service And Httpd In The Same Machine?

Feb 9, 2010

For the first time in installed and configured centos-ds from this HowTos and from the manuals.It is running nicely but disabled my httpd.Is it not possible to run directory service and httpd in the same machine

View 3 Replies View Related

CentOS 5 :: Service HTTPD Fails When Server Restarted

Apr 22, 2011

I installed centos 5.5 and httpd service was working well for the last 2 weeks till yesterday. I restarted server and noted my hosting service were not working. I have tried service httpd restart on the terminal and it dispalys [FAILED]. I updated my machine and and have tried restarting it but it doesn't work. I am new to centos and I dont know how to solve this.

View 2 Replies View Related

Fedora Servers :: Upgrade From 10 To 11 Breaks Service Httpd Restart?

Mar 22, 2010

Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?

View 3 Replies View Related

Server :: Service HTTPD Status Dead But PID File Exists

Apr 14, 2011

I am using CentOS 5.6 with Apache 2.2.17. The Apache was compiled from source using RPM build to comply with PCI requirements. Also Plesk 9.3 is used as a control panel, but other than the config files the Apache is pretty standard. When the httpd is started, there are no errors reported in /var/log/messages or in the error_log, and the httpd starts, shows up in ps and the pid file exists in /var/run/httpd.pid.

However when you check the status 'service httpd status' you get 'httpd dead but subsys locked'. You can add websites normally, and the proper config files are generated so I am pretty sure this isn't a control panel issue as I have other servers running the same control panel and Apache 2.2.16 compiled and installed the same way as the 2.2.17 and there are no problems.

View 1 Replies View Related

Fedora :: Start A Service Before Network Service?

Nov 6, 2010

I need to start a service before network service How to?

View 1 Replies View Related

Server :: Change The Configuration In Httpd.conf File With Out Affect Current Status Of Http Service?

Jan 27, 2011

I need to change the some configuration in httpd.conf file with out affect any current status of http service.

View 3 Replies View Related

OpenSUSE :: Get A Message That Says 'Search Service Not Running' With A Button That Says 'Start Search Service'?

Jun 12, 2010

The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens

View 1 Replies View Related

Server :: DHCPD Will Start In Debug But Will Not Start As A Normal Service

Jun 7, 2010

I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.

The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)

ifconfig shows:

Code:

The interface has a fixed IP setup.

My dhcp.conf file looks like this:

Code:

When I start (try to) dhcpd via the service interface or via the prompt as

Code: service dhcpd start

I get an [FAILED] message and the following is in /var/log/messages

Code:

But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:

Code:

and /var/log/messages shows:

Code:

Why does the system ask a declaration for eth0 0.0.0.0?

View 3 Replies View Related

CentOS 5 :: Httpd Will Not Start

Sep 1, 2010

I am trying to set up my httpd on CentOs 5.5 I did some searches and found this link. [URL]

rpm -qa |grep -i httpd
httpd-2.2.3-43.el5.centos.3

I created the ssl files as they described but still it wont start.

ervice httpd start
Starting httpd: [Wed Sep 01 09:25:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[FAILED]
cat ssl_error_log

[Code].....

View 4 Replies View Related

General :: Set Mysql To Start 3 Minutes Before Httpd?

Sep 22, 2010

I have a big database, which should "build up" before receiving requests, so i need httpd to start about 3 minutes after mysql start, so it prevents the visitors to start querys to the database, and making server load high. How can i do this.

View 10 Replies View Related

Fedora Servers :: HTTPD Does Not Start On Boot

Jun 24, 2010

On this system httpd does not start on boot. I can manually start it without errors with service httpd start.

Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off

Where do I look to see why it wont start?

View 9 Replies View Related

CentOS 5 :: Httpd Can't Start Due To Ports 80 And 443 Magically Being In-use / Why Is So?

Dec 4, 2009

Recently I installed an SSL certificate from GoDaddy on my Amazon EC2 instance which runs CentOS 5. All has been good till I installed the SSL certificate. Everytime I restart the system it fails to have httpd service working because code...

I looked on the net and found a solution which says I should change port 80 and port 443 in files httpd.conf and ssl.conf to port 88 and 553 and restart apache, change back the ports to 80 and 443 and restart again. This method worked before but now I am stuck with it not starting with ports 80 and 443 and if I change these ports then I can't reach my site and I have to add port number wtih : which is really not good.

1- What causes this problem and where can I look to debug it?
2- What can I do to permenently stop this problem? is there any place that I can dedicate these two ports to apache user?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved